| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114 |
- * Clock bindings for Freescale i.MX35
- Required properties:
- - compatible: Should be "fsl,imx35-ccm"
- - reg: Address and length of the register set
- - interrupts: Should contain CCM interrupt
- - #clock-cells: Should be <1>
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. The following is a full list of i.MX35
- clocks and IDs.
- Clock ID
- ---------------------------
- ckih 0
- mpll 1
- ppll 2
- mpll_075 3
- arm 4
- hsp 5
- hsp_div 6
- hsp_sel 7
- ahb 8
- ipg 9
- arm_per_div 10
- ahb_per_div 11
- ipg_per 12
- uart_sel 13
- uart_div 14
- esdhc_sel 15
- esdhc1_div 16
- esdhc2_div 17
- esdhc3_div 18
- spdif_sel 19
- spdif_div_pre 20
- spdif_div_post 21
- ssi_sel 22
- ssi1_div_pre 23
- ssi1_div_post 24
- ssi2_div_pre 25
- ssi2_div_post 26
- usb_sel 27
- usb_div 28
- nfc_div 29
- asrc_gate 30
- pata_gate 31
- audmux_gate 32
- can1_gate 33
- can2_gate 34
- cspi1_gate 35
- cspi2_gate 36
- ect_gate 37
- edio_gate 38
- emi_gate 39
- epit1_gate 40
- epit2_gate 41
- esai_gate 42
- esdhc1_gate 43
- esdhc2_gate 44
- esdhc3_gate 45
- fec_gate 46
- gpio1_gate 47
- gpio2_gate 48
- gpio3_gate 49
- gpt_gate 50
- i2c1_gate 51
- i2c2_gate 52
- i2c3_gate 53
- iomuxc_gate 54
- ipu_gate 55
- kpp_gate 56
- mlb_gate 57
- mshc_gate 58
- owire_gate 59
- pwm_gate 60
- rngc_gate 61
- rtc_gate 62
- rtic_gate 63
- scc_gate 64
- sdma_gate 65
- spba_gate 66
- spdif_gate 67
- ssi1_gate 68
- ssi2_gate 69
- uart1_gate 70
- uart2_gate 71
- uart3_gate 72
- usbotg_gate 73
- wdog_gate 74
- max_gate 75
- admux_gate 76
- csi_gate 77
- csi_div 78
- csi_sel 79
- iim_gate 80
- gpu2d_gate 81
- ckli_gate 82
- Examples:
- clks: ccm@53f80000 {
- compatible = "fsl,imx35-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
- #clock-cells = <1>;
- };
- esdhc1: esdhc@53fb4000 {
- compatible = "fsl,imx35-esdhc";
- reg = <0x53fb4000 0x4000>;
- interrupts = <7>;
- clocks = <&clks 9>, <&clks 8>, <&clks 43>;
- clock-names = "ipg", "ahb", "per";
- };
|
