| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 |
- * Clock bindings for CSR SiRFprimaII
- Required properties:
- - compatible: Should be "sirf,prima2-clkc"
- - reg: Address and length of the register set
- - interrupts: Should contain clock controller interrupt
- - #clock-cells: Should be <1>
- The clock consumer should specify the desired clock by having the clock
- ID in its "clocks" phandle cell. The following is a full list of prima2
- clocks and IDs.
- Clock ID
- ---------------------------
- rtc 0
- osc 1
- pll1 2
- pll2 3
- pll3 4
- mem 5
- sys 6
- security 7
- dsp 8
- gps 9
- mf 10
- io 11
- cpu 12
- uart0 13
- uart1 14
- uart2 15
- tsc 16
- i2c0 17
- i2c1 18
- spi0 19
- spi1 20
- pwmc 21
- efuse 22
- pulse 23
- dmac0 24
- dmac1 25
- nand 26
- audio 27
- usp0 28
- usp1 29
- usp2 30
- vip 31
- gfx 32
- mm 33
- lcd 34
- vpp 35
- mmc01 36
- mmc23 37
- mmc45 38
- usbpll 39
- usb0 40
- usb1 41
- Examples:
- clks: clock-controller@88000000 {
- compatible = "sirf,prima2-clkc";
- reg = <0x88000000 0x1000>;
- interrupts = <3>;
- #clock-cells = <1>;
- };
- i2c0: i2c@b00e0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-i2c";
- reg = <0xb00e0000 0x10000>;
- interrupts = <24>;
- clocks = <&clks 17>;
- };
|
