| 12345678910111213141516 |
- Zevio GPIO controller
- Required properties:
- - compatible: Should be "lsi,zevio-gpio"
- - reg: Address and length of the register set for the device
- - #gpio-cells: Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
- - gpio-controller: Marks the device node as a GPIO controller.
- Example:
- gpio: gpio@90000000 {
- compatible = "lsi,zevio-gpio";
- reg = <0x90000000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
|
