CooCenter-System-kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt

NXP LPC18xx/43xx GPIO controller Device Tree Bindings
-----------------------------------------------------

Required properties:
- compatible		: Should be "nxp,lpc1850-gpio"
- reg			: Address and length of the register set for the device
- clocks		: Clock specifier (see clock bindings for details)
- gpio-controller	: Marks the device node as a GPIO controller.
- #gpio-cells 		: Should be two
			  - First cell is the GPIO line number
			  - Second cell is used to specify polarity

Optional properties:
- gpio-ranges		: Mapping between GPIO and pinctrl

Example:
#define LPC_GPIO(port, pin)	(port * 32 + pin)
#define LPC_PIN(port, pin)	(0x##port * 32 + pin)

gpio: gpio@400f4000 {
	compatible = "nxp,lpc1850-gpio";
	reg = <0x400f4000 0x4000>;
	clocks = <&ccu1 CLK_CPU_GPIO>;
	gpio-controller;
	#gpio-cells = <2>;
	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
			...
			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
};

gpio_joystick {
	compatible = "gpio-keys-polled";
	...

	button@0 {
		...
		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
	};
};