| 123456789101112131415161718192021222324252627282930313233 |
- NXP I2C controller for LPC2xxx/178x/18xx/43xx
- Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
- Optional properties:
- - clock-frequency: the desired I2C bus clock frequency in Hz; in
- absence of this property the default value is used (100 kHz).
- Example:
- i2c0: i2c@400a1000 {
- compatible = "nxp,lpc1788-i2c";
- reg = <0x400a1000 0x1000>;
- interrupts = <18>;
- clocks = <&ccu1 CLK_APB1_I2C0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- &i2c0 {
- clock-frequency = <400000>;
- lm75@48 {
- compatible = "nxp,lm75";
- reg = <0x48>;
- };
- };
|
