| 123456789101112131415161718192021222324252627 |
- * OMAP Interrupt Controller
- OMAP2/3 are using a TI interrupt controller that can support several
- configurable number of interrupts.
- Main node required properties:
- - compatible : should be:
- "ti,omap2-intc"
- - interrupt-controller : Identifies the node as an interrupt controller
- - #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The type shall be a <u32> and the value shall be 1.
- The cell contains the interrupt number in the range [0-128].
- - ti,intc-size: Number of interrupts handled by the interrupt controller.
- - reg: physical base address and size of the intc registers map.
- Example:
- intc: interrupt-controller@1 {
- compatible = "ti,omap2-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- ti,intc-size = <96>;
- reg = <0x48200000 0x1000>;
- };
|
