| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159 |
- * AB8500 Multi-Functional Device (MFD)
- Required parent device properties:
- - compatible : contains "stericsson,ab8500";
- - interrupts : contains the IRQ line for the AB8500
- - interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
- - #interrupt-cells : should be 2, for 2-cell format
- - The first cell is the AB8500 local IRQ number
- - The second cell is used to specify optional parameters
- - bits[3:0] trigger type and level flags:
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
- 4 = active high level-sensitive
- 8 = active low level-sensitive
- The AB8500 consists of a large and varied group of sub-devices:
- Device IRQ Names Supply Names Description
- ------ --------- ------------ -----------
- ab8500-bm : : : Battery Manager
- ab8500-btemp : : : Battery Temperature
- ab8500-charger : : : Battery Charger
- ab8500-codec : : : Audio Codec
- ab8500-fg : : vddadc : Fuel Gauge
- : NCONV_ACCU : : Accumulate N Sample Conversion
- : BATT_OVV : : Battery Over Voltage
- : LOW_BAT_F : : LOW threshold battery voltage
- : CC_INT_CALIB : : Coulomb Counter Internal Calibration
- : CCEOC : : Coulomb Counter End of Conversion
- ab8500-btemp : : vtvout : Battery Temperature
- : BAT_CTRL_INDB : : Battery Removal Indicator
- : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
- : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
- : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
- : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
- ab8500-charger : : vddadc : Charger interface
- : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
- : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
- : MAIN_EXT_CH_NOT_OK : : main charger not OK
- : MAIN_CH_TH_PROT_R : : Die temp is above main charger
- : MAIN_CH_TH_PROT_F : : Die temp is below main charger
- : VBUS_DET_F : : VBUS falling detected
- : VBUS_DET_R : : VBUS rising detected
- : USB_LINK_STATUS : : USB link status has changed
- : USB_CH_TH_PROT_R : : Die temp is above usb charger
- : USB_CH_TH_PROT_F : : Die temp is below usb charger
- : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
- : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
- : CH_WD_EXP : : Charger watchdog detected
- ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
- SW_CONV_END : :
- ab8500-gpio : : : GPIO Controller
- ab8500-ponkey : ONKEY_DBF : : Power-on Key
- ONKEY_DBR : :
- ab8500-pwm : : : Pulse Width Modulator
- ab8500-regulator : : : Regulators
- ab8500-rtc : 60S : : Real Time Clock
- : ALARM : :
- ab8500-sysctrl : : : System Control
- ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
- : ID_WAKEUP_F : v-ape :
- : VBUS_DET_F : musb_1v8 :
- : VBUS_DET_R : :
- : USB_LINK_STATUS : :
- : USB_ADP_PROBE_PLUG : :
- : USB_ADP_PROBE_UNPLUG : :
- Required child device properties:
- - compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
- pwm|regulator|rtc|sysctrl|usb]";
- Optional child device properties:
- - interrupts : contains the device IRQ(s) using the 2-cell format (see above)
- - interrupt-names : contains names of IRQ resource in the order in which they were
- supplied in the interrupts property
- - <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
- Non-standard child device properties:
- - Audio CODEC:
- - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
- - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
- ab8500 {
- compatible = "stericsson,ab8500";
- interrupts = <0 40 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- ab8500-rtc {
- compatible = "stericsson,ab8500-rtc";
- interrupts = <17 0x4
- 18 0x4>;
- interrupt-names = "60S", "ALARM";
- };
- ab8500-gpadc {
- compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 0x4
- 39 0x4>;
- interrupt-names = "HW_CONV_END", "SW_CONV_END";
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
- };
- ab8500-usb {
- compatible = "stericsson,ab8500-usb";
- interrupts = < 90 0x4
- 96 0x4
- 14 0x4
- 15 0x4
- 79 0x4
- 74 0x4
- 75 0x4>;
- interrupt-names = "ID_WAKEUP_R",
- "ID_WAKEUP_F",
- "VBUS_DET_F",
- "VBUS_DET_R",
- "USB_LINK_STATUS",
- "USB_ADP_PROBE_PLUG",
- "USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
- v-ape-supply = <&db8500_vape_reg>;
- musb_1v8-supply = <&db8500_vsmps2_reg>;
- };
- ab8500-ponkey {
- compatible = "stericsson,ab8500-ponkey";
- interrupts = <6 0x4
- 7 0x4>;
- interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
- };
- ab8500-sysctrl {
- compatible = "stericsson,ab8500-sysctrl";
- };
- ab8500-pwm {
- compatible = "stericsson,ab8500-pwm";
- };
- codec: ab8500-codec {
- compatible = "stericsson,ab8500-codec";
- stericsson,earpeice-cmv = <950>; /* Units in mV. */
- };
- ab8500-regulators {
- compatible = "stericsson,ab8500-regulator";
- ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- /*
- * See: Documentation/devicetree/bindings/regulator/regulator.txt
- * for more information on regulators
- */
- };
- };
- };
|
