| 123456789101112131415161718192021 |
- * MTD generic binding
- - nand-ecc-mode : String, operation mode of the NAND ecc mode.
- Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
- "soft_bch".
- - nand-bus-width : 8 or 16 bus width if not present 8
- - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
- - nand-ecc-strength: integer representing the number of bits to correct
- per ECC step.
- - nand-ecc-step-size: integer representing the number of data bytes
- that are covered by a single ECC step.
- The ECC strength and ECC step size properties define the correction capability
- of a controller. Together, they say a controller can correct "{strength} bit
- errors per {size} bytes".
- The interpretation of these parameters is implementation-defined, so not all
- implementations must support all possible combinations. However, implementations
- are encouraged to further specify the value(s) they support.
|
