| 12345678910111213141516171819202122232425262728293031323334353637 |
- Micrel PHY properties.
- These properties cover the base properties Micrel PHYs.
- Optional properties:
- - micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
- Configure the LED mode with single value. The list of PHYs and the
- bits that are currently supported:
- KSZ8001: register 0x1e, bits 15..14
- KSZ8041: register 0x1e, bits 15..14
- KSZ8021: register 0x1f, bits 5..4
- KSZ8031: register 0x1f, bits 5..4
- KSZ8051: register 0x1f, bits 5..4
- KSZ8081: register 0x1f, bits 5..4
- KSZ8091: register 0x1f, bits 5..4
- See the respective PHY datasheet for the mode values.
- - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
- bit selects 25 MHz mode
- Setting the RMII Reference Clock Select bit enables 25 MHz rather
- than 50 MHz clock mode.
- Note that this option in only needed for certain PHY revisions with a
- non-standard, inverted function of this configuration bit.
- Specifically, a clock reference ("rmii-ref" below) is always needed to
- actually select a mode.
- - clocks, clock-names: contains clocks according to the common clock bindings.
- supported clocks:
- - KSZ8021, KSZ8031, KSZ8081, KSZ8091: "rmii-ref": The RMII reference
- input clock. Used to determine the XI input clock.
|
