| 1234567891011121314151617181920212223242526272829303132333435363738 |
- * Freescale IMX6Q IOMUX Controller
- Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
- and usage.
- Required properties:
- - compatible: "fsl,imx6q-iomuxc"
- - fsl,pins: two integers array, represents a group of pins mux and config
- setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
- pin working on a specific function, CONFIG is the pad setting value like
- pull-up for this pin. Please refer to imx6q datasheet for the valid pad
- config settings.
- CONFIG bits definition:
- PAD_CTL_HYS (1 << 16)
- PAD_CTL_PUS_100K_DOWN (0 << 14)
- PAD_CTL_PUS_47K_UP (1 << 14)
- PAD_CTL_PUS_100K_UP (2 << 14)
- PAD_CTL_PUS_22K_UP (3 << 14)
- PAD_CTL_PUE (1 << 13)
- PAD_CTL_PKE (1 << 12)
- PAD_CTL_ODE (1 << 11)
- PAD_CTL_SPEED_LOW (1 << 6)
- PAD_CTL_SPEED_MED (2 << 6)
- PAD_CTL_SPEED_HIGH (3 << 6)
- PAD_CTL_DSE_DISABLE (0 << 3)
- PAD_CTL_DSE_240ohm (1 << 3)
- PAD_CTL_DSE_120ohm (2 << 3)
- PAD_CTL_DSE_80ohm (3 << 3)
- PAD_CTL_DSE_60ohm (4 << 3)
- PAD_CTL_DSE_48ohm (5 << 3)
- PAD_CTL_DSE_40ohm (6 << 3)
- PAD_CTL_DSE_34ohm (7 << 3)
- PAD_CTL_SRE_FAST (1 << 0)
- PAD_CTL_SRE_SLOW (0 << 0)
- Refer to imx6q-pinfunc.h in device tree source folder for all available
- imx6q PIN_FUNC_ID.
|
