| 123456789101112131415161718192021222324252627282930 |
- * BCM63xx UART
- Required properties:
- - compatible: "brcm,bcm6345-uart"
- - reg: The base address of the UART register bank.
- - interrupts: A single interrupt specifier.
- - clocks: Clock driving the hardware; used to figure out the baud rate
- divisor.
- Example:
- uart0: serial@14e00520 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x14e00520 0x18>;
- interrupt-parent = <&periph_intc>;
- interrupts = <2>;
- clocks = <&periph_clk>;
- };
- clocks {
- periph_clk: periph_clk@0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <54000000>;
- };
- };
|
