CooCenter-System-kernel/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt

NVIDIA Tegra30 timer

The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
running counter, and 5 watchdog modules. The first two channels may also
trigger a legacy watchdog reset.

Required properties:

- compatible : For Tegra30, must contain "nvidia,tegra30-timer".  Otherwise,
  must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
  <chip> is tegra124 or tegra132.
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
    through 5, and one for the shared interrupt for the remaining channels.
- clocks : Must contain one entry, for the module clock.
  See ../clocks/clock-bindings.txt for details.

timer {
	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
	reg = <0x60005000 0x400>;
	interrupts = <0 0 0x04
		      0 1 0x04
		      0 41 0x04
		      0 42 0x04
		      0 121 0x04
		      0 122 0x04>;
	clocks = <&tegra_car 214>;
};