123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237 |
- /*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Amit Bhor, Kanika Nema: Codito Technologies 2004
- */
- #include <linux/errno.h>
- #include <linux/module.h>
- #include <linux/sched.h>
- #include <linux/mm.h>
- #include <linux/fs.h>
- #include <linux/unistd.h>
- #include <linux/ptrace.h>
- #include <linux/slab.h>
- #include <linux/syscalls.h>
- #include <linux/elf.h>
- #include <linux/tick.h>
- SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
- {
- task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
- return 0;
- }
- /*
- * We return the user space TLS data ptr as sys-call return code
- * Ideally it should be copy to user.
- * However we can cheat by the fact that some sys-calls do return
- * absurdly high values
- * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
- * it won't be considered a sys-call error
- * and it will be loads better than copy-to-user, which is a definite
- * D-TLB Miss
- */
- SYSCALL_DEFINE0(arc_gettls)
- {
- return task_thread_info(current)->thr_ptr;
- }
- void arch_cpu_idle(void)
- {
- /* sleep, but enable all interrupts before committing */
- __asm__ __volatile__(
- "sleep %0 \n"
- :
- :"I"(ISA_SLEEP_ARG)); /* can't be "r" has to be embedded const */
- }
- asmlinkage void ret_from_fork(void);
- /*
- * Copy architecture-specific thread state
- *
- * Layout of Child kernel mode stack as setup at the end of this function is
- *
- * | ... |
- * | ... |
- * | unused |
- * | |
- * ------------------
- * | r25 | <==== top of Stack (thread.ksp)
- * ~ ~
- * | --to-- | (CALLEE Regs of kernel mode)
- * | r13 |
- * ------------------
- * | fp |
- * | blink | @ret_from_fork
- * ------------------
- * | |
- * ~ ~
- * ~ ~
- * | |
- * ------------------
- * | r12 |
- * ~ ~
- * | --to-- | (scratch Regs of user mode)
- * | r0 |
- * ------------------
- * | SP |
- * | orig_r0 |
- * | event/ECR |
- * | user_r25 |
- * ------------------ <===== END of PAGE
- */
- int copy_thread(unsigned long clone_flags,
- unsigned long usp, unsigned long kthread_arg,
- struct task_struct *p)
- {
- struct pt_regs *c_regs; /* child's pt_regs */
- unsigned long *childksp; /* to unwind out of __switch_to() */
- struct callee_regs *c_callee; /* child's callee regs */
- struct callee_regs *parent_callee; /* paren't callee */
- struct pt_regs *regs = current_pt_regs();
- /* Mark the specific anchors to begin with (see pic above) */
- c_regs = task_pt_regs(p);
- childksp = (unsigned long *)c_regs - 2; /* 2 words for FP/BLINK */
- c_callee = ((struct callee_regs *)childksp) - 1;
- /*
- * __switch_to() uses thread.ksp to start unwinding stack
- * For kernel threads we don't need to create callee regs, the
- * stack layout nevertheless needs to remain the same.
- * Also, since __switch_to anyways unwinds callee regs, we use
- * this to populate kernel thread entry-pt/args into callee regs,
- * so that ret_from_kernel_thread() becomes simpler.
- */
- p->thread.ksp = (unsigned long)c_callee; /* THREAD_KSP */
- /* __switch_to expects FP(0), BLINK(return addr) at top */
- childksp[0] = 0; /* fp */
- childksp[1] = (unsigned long)ret_from_fork; /* blink */
- if (unlikely(p->flags & PF_KTHREAD)) {
- memset(c_regs, 0, sizeof(struct pt_regs));
- c_callee->r13 = kthread_arg;
- c_callee->r14 = usp; /* function */
- return 0;
- }
- /*--------- User Task Only --------------*/
- /* __switch_to expects FP(0), BLINK(return addr) at top of stack */
- childksp[0] = 0; /* for POP fp */
- childksp[1] = (unsigned long)ret_from_fork; /* for POP blink */
- /* Copy parents pt regs on child's kernel mode stack */
- *c_regs = *regs;
- if (usp)
- c_regs->sp = usp;
- c_regs->r0 = 0; /* fork returns 0 in child */
- parent_callee = ((struct callee_regs *)regs) - 1;
- *c_callee = *parent_callee;
- if (unlikely(clone_flags & CLONE_SETTLS)) {
- /*
- * set task's userland tls data ptr from 4th arg
- * clone C-lib call is difft from clone sys-call
- */
- task_thread_info(p)->thr_ptr = regs->r3;
- } else {
- /* Normal fork case: set parent's TLS ptr in child */
- task_thread_info(p)->thr_ptr =
- task_thread_info(current)->thr_ptr;
- }
- /*
- * setup usermode thread pointer #1:
- * when child is picked by scheduler, __switch_to() uses @c_callee to
- * populate usermode callee regs: this works (despite being in a kernel
- * function) since special return path for child @ret_from_fork()
- * ensures those regs are not clobbered all the way to RTIE to usermode
- */
- c_callee->r25 = task_thread_info(p)->thr_ptr;
- #ifdef CONFIG_ARC_CURR_IN_REG
- /*
- * setup usermode thread pointer #2:
- * however for this special use of r25 in kernel, __switch_to() sets
- * r25 for kernel needs and only in the final return path is usermode
- * r25 setup, from pt_regs->user_r25. So set that up as well
- */
- c_regs->user_r25 = c_callee->r25;
- #endif
- return 0;
- }
- /*
- * Do necessary setup to start up a new user task
- */
- void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
- {
- regs->sp = usp;
- regs->ret = pc;
- /*
- * [U]ser Mode bit set
- * [L] ZOL loop inhibited to begin with - cleared by a LP insn
- * Interrupts enabled
- */
- regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
- /* bogus seed values for debugging */
- regs->lp_start = 0x10;
- regs->lp_end = 0x80;
- }
- /*
- * Some archs flush debug and FPU info here
- */
- void flush_thread(void)
- {
- }
- /*
- * Free any architecture-specific thread data structures, etc.
- */
- void exit_thread(void)
- {
- }
- int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
- {
- return 0;
- }
- int elf_check_arch(const struct elf32_hdr *x)
- {
- unsigned int eflags;
- if (x->e_machine != EM_ARC_INUSE) {
- pr_err("ELF not built for %s ISA\n",
- is_isa_arcompact() ? "ARCompact":"ARCv2");
- return 0;
- }
- eflags = x->e_flags;
- if ((eflags & EF_ARC_OSABI_MSK) < EF_ARC_OSABI_CURRENT) {
- pr_err("ABI mismatch - you need newer toolchain\n");
- force_sigsegv(SIGSEGV, current);
- return 0;
- }
- return 1;
- }
- EXPORT_SYMBOL(elf_check_arch);
|