CooCenter-System-kernel/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

/*
 * Device Tree Include file for Freescale Layerscape-2080A family SoC.
 *
 * Copyright (C) 2014-2015, Freescale Semiconductor
 *
 * Bhupesh Sharma <bhupesh.sharma@freescale.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPLv2 or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/ {
	compatible = "fsl,ls2080a";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		/*
		 * We expect the enable-method for cpu's to be "psci", but this
		 * is dependent on the SoC FW, which will fill this in.
		 *
		 * Currently supported enable-method is psci v0.2
		 */

		/* We have 4 clusters having 2 Cortex-A57 cores each */
		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x0>;
			clocks = <&clockgen 1 0>;
		};

		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x1>;
			clocks = <&clockgen 1 0>;
		};

		cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x100>;
			clocks = <&clockgen 1 1>;
		};

		cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x101>;
			clocks = <&clockgen 1 1>;
		};

		cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x200>;
			clocks = <&clockgen 1 2>;
		};

		cpu@201 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x201>;
			clocks = <&clockgen 1 2>;
		};

		cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x300>;
			clocks = <&clockgen 1 3>;
		};

		cpu@301 {
			device_type = "cpu";
			compatible = "arm,cortex-a57";
			reg = <0x0 0x301>;
			clocks = <&clockgen 1 3>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x00000000 0x80000000 0 0x80000000>;
		      /* DRAM space - 1, size : 2 GB DRAM */
	};

	sysclk: sysclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <100000000>;
		clock-output-names = "sysclk";
	};

	gic: interrupt-controller@6000000 {
		compatible = "arm,gic-v3";
		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
		#interrupt-cells = <3>;
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		interrupt-controller;
		interrupts = <1 9 0x4>;

		its: gic-its@6020000 {
			compatible = "arm,gic-v3-its";
			msi-controller;
			reg = <0x0 0x6020000 0 0x20000>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
			     <1 11 0x8>, /* Virtual PPI, active-low */
			     <1 10 0x8>; /* Hypervisor PPI, active-low */
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		clockgen: clocking@1300000 {
			compatible = "fsl,ls2080a-clockgen";
			reg = <0 0x1300000 0 0xa0000>;
			#clock-cells = <2>;
			clocks = <&sysclk>;
		};

		serial0: serial@21c0500 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21c0500 0x0 0x100>;
			clocks = <&clockgen 4 3>;
			interrupts = <0 32 0x4>; /* Level high type */
		};

		serial1: serial@21c0600 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21c0600 0x0 0x100>;
			clocks = <&clockgen 4 3>;
			interrupts = <0 32 0x4>; /* Level high type */
		};

		fsl_mc: fsl-mc@80c000000 {
			compatible = "fsl,qoriq-mc";
			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
		};

		smmu: iommu@5000000 {
			compatible = "arm,mmu-500";
			reg = <0 0x5000000 0 0x800000>;
			#global-interrupts = <12>;
			interrupts = <0 13 4>, /* global secure fault */
				     <0 14 4>, /* combined secure interrupt */
				     <0 15 4>, /* global non-secure fault */
				     <0 16 4>, /* combined non-secure interrupt */
				/* performance counter interrupts 0-7 */
				     <0 211 4>, <0 212 4>,
				     <0 213 4>, <0 214 4>,
				     <0 215 4>, <0 216 4>,
				     <0 217 4>, <0 218 4>,
				/* per context interrupt, 64 interrupts */
				     <0 146 4>, <0 147 4>,
				     <0 148 4>, <0 149 4>,
				     <0 150 4>, <0 151 4>,
				     <0 152 4>, <0 153 4>,
				     <0 154 4>, <0 155 4>,
				     <0 156 4>, <0 157 4>,
				     <0 158 4>, <0 159 4>,
				     <0 160 4>, <0 161 4>,
				     <0 162 4>, <0 163 4>,
				     <0 164 4>, <0 165 4>,
				     <0 166 4>, <0 167 4>,
				     <0 168 4>, <0 169 4>,
				     <0 170 4>, <0 171 4>,
				     <0 172 4>, <0 173 4>,
				     <0 174 4>, <0 175 4>,
				     <0 176 4>, <0 177 4>,
				     <0 178 4>, <0 179 4>,
				     <0 180 4>, <0 181 4>,
				     <0 182 4>, <0 183 4>,
				     <0 184 4>, <0 185 4>,
				     <0 186 4>, <0 187 4>,
				     <0 188 4>, <0 189 4>,
				     <0 190 4>, <0 191 4>,
				     <0 192 4>, <0 193 4>,
				     <0 194 4>, <0 195 4>,
				     <0 196 4>, <0 197 4>,
				     <0 198 4>, <0 199 4>,
				     <0 200 4>, <0 201 4>,
				     <0 202 4>, <0 203 4>,
				     <0 204 4>, <0 205 4>,
				     <0 206 4>, <0 207 4>,
				     <0 208 4>, <0 209 4>;
			mmu-masters = <&fsl_mc 0x300 0>;
		};

		dspi: dspi@2100000 {
			status = "disabled";
			compatible = "fsl,vf610-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2100000 0x0 0x10000>;
			interrupts = <0 26 0x4>; /* Level high type */
			clocks = <&clockgen 4 3>;
			clock-names = "dspi";
			spi-num-chipselects = <5>;
			bus-num = <0>;
		};

		esdhc: esdhc@2140000 {
			status = "disabled";
			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
			reg = <0x0 0x2140000 0x0 0x10000>;
			interrupts = <0 28 0x4>; /* Level high type */
			clock-frequency = <0>;	/* Updated by bootloader */
			voltage-ranges = <1800 1800 3300 3300>;
			sdhci,auto-cmd12;
			little-endian;
			bus-width = <4>;
		};

		gpio0: gpio@2300000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2300000 0x0 0x10000>;
			interrupts = <0 36 0x4>; /* Level high type */
			gpio-controller;
			little-endian;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio1: gpio@2310000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2310000 0x0 0x10000>;
			interrupts = <0 36 0x4>; /* Level high type */
			gpio-controller;
			little-endian;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio@2320000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2320000 0x0 0x10000>;
			interrupts = <0 37 0x4>; /* Level high type */
			gpio-controller;
			little-endian;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio@2330000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2330000 0x0 0x10000>;
			interrupts = <0 37 0x4>; /* Level high type */
			gpio-controller;
			little-endian;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		i2c0: i2c@2000000 {
			status = "disabled";
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2000000 0x0 0x10000>;
			interrupts = <0 34 0x4>; /* Level high type */
			clock-names = "i2c";
			clocks = <&clockgen 4 3>;
		};

		i2c1: i2c@2010000 {
			status = "disabled";
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2010000 0x0 0x10000>;
			interrupts = <0 34 0x4>; /* Level high type */
			clock-names = "i2c";
			clocks = <&clockgen 4 3>;
		};

		i2c2: i2c@2020000 {
			status = "disabled";
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2020000 0x0 0x10000>;
			interrupts = <0 35 0x4>; /* Level high type */
			clock-names = "i2c";
			clocks = <&clockgen 4 3>;
		};

		i2c3: i2c@2030000 {
			status = "disabled";
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2030000 0x0 0x10000>;
			interrupts = <0 35 0x4>; /* Level high type */
			clock-names = "i2c";
			clocks = <&clockgen 4 3>;
		};

		ifc: ifc@2240000 {
			compatible = "fsl,ifc", "simple-bus";
			reg = <0x0 0x2240000 0x0 0x20000>;
			interrupts = <0 21 0x4>; /* Level high type */
			little-endian;
			#address-cells = <2>;
			#size-cells = <1>;

			ranges = <0 0 0x5 0x80000000 0x08000000
				  2 0 0x5 0x30000000 0x00010000
				  3 0 0x5 0x20000000 0x00010000>;
		};

		qspi: quadspi@20c0000 {
			status = "disabled";
			compatible = "fsl,vf610-qspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x20c0000 0x0 0x10000>,
			      <0x0 0x20000000 0x0 0x10000000>;
			reg-names = "QuadSPI", "QuadSPI-memory";
			interrupts = <0 25 0x4>; /* Level high type */
			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
			clock-names = "qspi_en", "qspi";
		};

		pcie@3400000 {
			compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
			       0x10 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 108 0x4>; /* Level high type */
			interrupt-names = "intr";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&its>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
					<0000 0 0 2 &gic 0 0 0 110 4>,
					<0000 0 0 3 &gic 0 0 0 111 4>,
					<0000 0 0 4 &gic 0 0 0 112 4>;
		};

		pcie@3500000 {
			compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
			       0x12 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 113 0x4>; /* Level high type */
			interrupt-names = "intr";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&its>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
					<0000 0 0 2 &gic 0 0 0 115 4>,
					<0000 0 0 3 &gic 0 0 0 116 4>,
					<0000 0 0 4 &gic 0 0 0 117 4>;
		};

		pcie@3600000 {
			compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
			       0x14 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 118 0x4>; /* Level high type */
			interrupt-names = "intr";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <8>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&its>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
					<0000 0 0 2 &gic 0 0 0 120 4>,
					<0000 0 0 3 &gic 0 0 0 121 4>,
					<0000 0 0 4 &gic 0 0 0 122 4>;
		};

		pcie@3700000 {
			compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
			       0x16 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 123 0x4>; /* Level high type */
			interrupt-names = "intr";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&its>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
					<0000 0 0 2 &gic 0 0 0 125 4>,
					<0000 0 0 3 &gic 0 0 0 126 4>,
					<0000 0 0 4 &gic 0 0 0 127 4>;
		};

		sata0: sata@3200000 {
			status = "disabled";
			compatible = "fsl,ls2080a-ahci";
			reg = <0x0 0x3200000 0x0 0x10000>;
			interrupts = <0 133 0x4>; /* Level high type */
			clocks = <&clockgen 4 3>;
		};

		sata1: sata@3210000 {
			status = "disabled";
			compatible = "fsl,ls2080a-ahci";
			reg = <0x0 0x3210000 0x0 0x10000>;
			interrupts = <0 136 0x4>; /* Level high type */
			clocks = <&clockgen 4 3>;
		};

		usb0: usb3@3100000 {
			status = "disabled";
			compatible = "snps,dwc3";
			reg = <0x0 0x3100000 0x0 0x10000>;
			interrupts = <0 80 0x4>; /* Level high type */
			dr_mode = "host";
		};

		usb1: usb3@3110000 {
			status = "disabled";
			compatible = "snps,dwc3";
			reg = <0x0 0x3110000 0x0 0x10000>;
			interrupts = <0 81 0x4>; /* Level high type */
			dr_mode = "host";
		};

		ccn@4000000 {
			compatible = "arm,ccn-504";
			reg = <0x0 0x04000000 0x0 0x01000000>;
			interrupts = <0 12 4>;
		};
	};
};