| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117 |
- if (BF537 || BF534 || BF536)
- source "arch/blackfin/mach-bf537/boards/Kconfig"
- menu "BF537 Specific Configuration"
- comment "Interrupt Priority Assignment"
- menu "Priority"
- config IRQ_PLL_WAKEUP
- int "IRQ_PLL_WAKEUP"
- default 7
- config IRQ_DMA_ERROR
- int "IRQ_DMA_ERROR Generic"
- default 7
- config IRQ_ERROR
- int "IRQ_ERROR: PPI CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
- default 11
- config IRQ_RTC
- int "IRQ_RTC"
- default 8
- config IRQ_PPI
- int "IRQ_PPI"
- default 8
- config IRQ_SPORT0_RX
- int "IRQ_SPORT0_RX"
- default 9
- config IRQ_SPORT0_TX
- int "IRQ_SPORT0_TX"
- default 9
- config IRQ_SPORT1_RX
- int "IRQ_SPORT1_RX"
- default 9
- config IRQ_SPORT1_TX
- int "IRQ_SPORT1_TX"
- default 9
- config IRQ_TWI
- int "IRQ_TWI"
- default 10
- config IRQ_SPI
- int "IRQ_SPI"
- default 10
- config IRQ_UART0_RX
- int "IRQ_UART0_RX"
- default 10
- config IRQ_UART0_TX
- int "IRQ_UART0_TX"
- default 10
- config IRQ_UART1_RX
- int "IRQ_UART1_RX"
- default 10
- config IRQ_UART1_TX
- int "IRQ_UART1_TX"
- default 10
- config IRQ_CAN_RX
- int "IRQ_CAN_RX"
- default 11
- config IRQ_CAN_TX
- int "IRQ_CAN_TX"
- default 11
- config IRQ_MAC_RX
- int "IRQ_MAC_RX"
- default 11
- config IRQ_MAC_TX
- int "IRQ_MAC_TX"
- default 11
- config IRQ_TIMER0
- int "IRQ_TIMER0"
- default 7 if TICKSOURCE_GPTMR0
- default 8
- config IRQ_TIMER1
- int "IRQ_TIMER1"
- default 12
- config IRQ_TIMER2
- int "IRQ_TIMER2"
- default 12
- config IRQ_TIMER3
- int "IRQ_TIMER3"
- default 12
- config IRQ_TIMER4
- int "IRQ_TIMER4"
- default 12
- config IRQ_TIMER5
- int "IRQ_TIMER5"
- default 12
- config IRQ_TIMER6
- int "IRQ_TIMER6"
- default 12
- config IRQ_TIMER7
- int "IRQ_TIMER7"
- default 12
- config IRQ_PROG_INTA
- int "IRQ_PROG_INTA"
- default 12
- config IRQ_PORTG_INTB
- int "IRQ_PORTG_INTB"
- default 12
- config IRQ_MEM_DMA0
- int "IRQ_MEM_DMA0"
- default 13
- config IRQ_MEM_DMA1
- int "IRQ_MEM_DMA1"
- default 13
- config IRQ_WATCH
- int "IRQ_WATCH"
- default 13
- help
- Enter the priority numbers between 7-13 ONLY. Others are Reserved.
- This applies to all the above. It is not recommended to assign the
- highest priority number 7 to UART or any other device.
- endmenu
- endmenu
- endif
|
