ints-priority.c 6.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214
  1. /*
  2. * Copyright 2005-2009 Analog Devices Inc.
  3. *
  4. * Licensed under the GPL-2 or later.
  5. *
  6. * Set up the interrupt priorities
  7. */
  8. #include <linux/module.h>
  9. #include <linux/irq.h>
  10. #include <asm/blackfin.h>
  11. #include <asm/irq_handler.h>
  12. #include <asm/bfin5xx_spi.h>
  13. #include <asm/bfin_sport.h>
  14. #include <asm/bfin_can.h>
  15. #include <asm/bfin_dma.h>
  16. #include <asm/dpmc.h>
  17. void __init program_IAR(void)
  18. {
  19. /* Program the IAR0 Register with the configured priority */
  20. bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
  21. ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
  22. ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
  23. ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
  24. ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
  25. ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
  26. ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
  27. ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
  28. bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
  29. ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
  30. ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
  31. ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
  32. ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
  33. ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
  34. ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
  35. ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
  36. bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
  37. ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
  38. ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
  39. ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
  40. ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
  41. ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
  42. ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
  43. ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
  44. bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
  45. ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
  46. ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
  47. ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
  48. ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
  49. ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
  50. ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
  51. ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
  52. SSYNC();
  53. }
  54. #define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */
  55. #define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */
  56. #define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
  57. #define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
  58. #define UART_ERR_MASK (0x6) /* UART_IIR */
  59. #define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
  60. static int error_int_mask;
  61. static void bf537_generic_error_mask_irq(struct irq_data *d)
  62. {
  63. error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR));
  64. if (!error_int_mask)
  65. bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
  66. }
  67. static void bf537_generic_error_unmask_irq(struct irq_data *d)
  68. {
  69. bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
  70. error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR);
  71. }
  72. static struct irq_chip bf537_generic_error_irqchip = {
  73. .name = "ERROR",
  74. .irq_ack = bfin_ack_noop,
  75. .irq_mask_ack = bf537_generic_error_mask_irq,
  76. .irq_mask = bf537_generic_error_mask_irq,
  77. .irq_unmask = bf537_generic_error_unmask_irq,
  78. };
  79. static void bf537_demux_error_irq(struct irq_desc *inta_desc)
  80. {
  81. int irq = 0;
  82. #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
  83. if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
  84. irq = IRQ_MAC_ERROR;
  85. else
  86. #endif
  87. if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
  88. irq = IRQ_SPORT0_ERROR;
  89. else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
  90. irq = IRQ_SPORT1_ERROR;
  91. else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
  92. irq = IRQ_PPI_ERROR;
  93. else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
  94. irq = IRQ_CAN_ERROR;
  95. else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
  96. irq = IRQ_SPI_ERROR;
  97. else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
  98. irq = IRQ_UART0_ERROR;
  99. else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
  100. irq = IRQ_UART1_ERROR;
  101. if (irq) {
  102. if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR)))
  103. bfin_handle_irq(irq);
  104. else {
  105. switch (irq) {
  106. case IRQ_PPI_ERROR:
  107. bfin_write_PPI_STATUS(PPI_ERR_MASK);
  108. break;
  109. #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
  110. case IRQ_MAC_ERROR:
  111. bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
  112. break;
  113. #endif
  114. case IRQ_SPORT0_ERROR:
  115. bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
  116. break;
  117. case IRQ_SPORT1_ERROR:
  118. bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
  119. break;
  120. case IRQ_CAN_ERROR:
  121. bfin_write_CAN_GIS(CAN_ERR_MASK);
  122. break;
  123. case IRQ_SPI_ERROR:
  124. bfin_write_SPI_STAT(SPI_ERR_MASK);
  125. break;
  126. default:
  127. break;
  128. }
  129. pr_debug("IRQ %d:"
  130. " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
  131. irq);
  132. }
  133. } else
  134. pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
  135. __func__);
  136. }
  137. #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
  138. static int mac_rx_int_mask;
  139. static void bf537_mac_rx_mask_irq(struct irq_data *d)
  140. {
  141. mac_rx_int_mask &= ~(1L << (d->irq - IRQ_MAC_RX));
  142. if (!mac_rx_int_mask)
  143. bfin_internal_mask_irq(IRQ_PH_INTA_MAC_RX);
  144. }
  145. static void bf537_mac_rx_unmask_irq(struct irq_data *d)
  146. {
  147. bfin_internal_unmask_irq(IRQ_PH_INTA_MAC_RX);
  148. mac_rx_int_mask |= 1L << (d->irq - IRQ_MAC_RX);
  149. }
  150. static struct irq_chip bf537_mac_rx_irqchip = {
  151. .name = "ERROR",
  152. .irq_ack = bfin_ack_noop,
  153. .irq_mask_ack = bf537_mac_rx_mask_irq,
  154. .irq_mask = bf537_mac_rx_mask_irq,
  155. .irq_unmask = bf537_mac_rx_unmask_irq,
  156. };
  157. static void bf537_demux_mac_rx_irq(struct irq_desc *desc)
  158. {
  159. if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR))
  160. bfin_handle_irq(IRQ_MAC_RX);
  161. else
  162. bfin_demux_gpio_irq(desc);
  163. }
  164. #endif
  165. void __init init_mach_irq(void)
  166. {
  167. int irq;
  168. #if defined(CONFIG_BF537) || defined(CONFIG_BF536)
  169. /* Clear EMAC Interrupt Status bits so we can demux it later */
  170. bfin_write_EMAC_SYSTAT(-1);
  171. #endif
  172. irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq);
  173. for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
  174. irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip,
  175. handle_level_irq);
  176. #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
  177. irq_set_chained_handler(IRQ_PH_INTA_MAC_RX, bf537_demux_mac_rx_irq);
  178. irq_set_chip_and_handler(IRQ_MAC_RX, &bf537_mac_rx_irqchip, handle_level_irq);
  179. irq_set_chip_and_handler(IRQ_PORTH_INTA, &bf537_mac_rx_irqchip, handle_level_irq);
  180. irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
  181. #endif
  182. }