CooCenter-System-kernel/arch/m32r/include/asm/s1d13806.h

//----------------------------------------------------------------------------
//
//  File generated by S1D13806CFG.EXE
//
//  Copyright (c) 2000,2001 Epson Research and Development, Inc.
//  All rights reserved.
//
//----------------------------------------------------------------------------

// Panel:  (active)  640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz)
// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz)

#define SWIVEL_VIEW		0	/* 0:none, 1:90 not completed */

static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {

    {0x0001,0x00},   // Miscellaneous Register
    {0x01FC,0x00},   // Display Mode Register
#if defined(CONFIG_PLAT_MAPPI)
    {0x0004,0x00},   // General IO Pins Configuration Register 0
    {0x0005,0x00},   // General IO Pins Configuration Register 1
    {0x0008,0x00},   // General IO Pins Control Register 0
    {0x0009,0x00},   // General IO Pins Control Register 1
    {0x0010,0x00},   // Memory Clock Configuration Register
    {0x0014,0x00},   // LCD Pixel Clock Configuration Register
    {0x0018,0x00},   // CRT/TV Pixel Clock Configuration Register
    {0x001C,0x00},   // MediaPlug Clock Configuration Register
/*
 * .. 10MHz: 0x00
 * .. 30MHz: 0x01
 * 30MHz ..: 0x02
 */
    {0x001E,0x02},   // CPU To Memory Wait State Select Register
    {0x0021,0x02},   // DRAM Refresh Rate Register
    {0x002A,0x11},   // DRAM Timings Control Register 0
    {0x002B,0x13},   // DRAM Timings Control Register 1
    {0x0020,0x80},   // Memory Configuration Register
    {0x0030,0x25},   // Panel Type Register
    {0x0031,0x00},   // MOD Rate Register
    {0x0032,0x4F},   // LCD Horizontal Display Width Register
    {0x0034,0x12},   // LCD Horizontal Non-Display Period Register
    {0x0035,0x01},   // TFT FPLINE Start Position Register
    {0x0036,0x0B},   // TFT FPLINE Pulse Width Register
    {0x0038,0xDF},   // LCD Vertical Display Height Register 0
    {0x0039,0x01},   // LCD Vertical Display Height Register 1
    {0x003A,0x2C},   // LCD Vertical Non-Display Period Register
    {0x003B,0x0A},   // TFT FPFRAME Start Position Register
    {0x003C,0x01},   // TFT FPFRAME Pulse Width Register

    {0x0041,0x00},   // LCD Miscellaneous Register
    {0x0042,0x00},   // LCD Display Start Address Register 0
    {0x0043,0x00},   // LCD Display Start Address Register 1
    {0x0044,0x00},   // LCD Display Start Address Register 2

#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
    {0x0004,0x07},   // GPIO[0:7] direction
    {0x0005,0x00},   // GPIO[8:12] direction
    {0x0008,0x00},   // GPIO[0:7] data
    {0x0009,0x00},   // GPIO[8:12] data
    {0x0008,0x04},   // LCD panel Vcc on
    {0x0008,0x05},   // LCD panel reset
    {0x0010,0x01},   // Memory Clock Configuration Register
    {0x0014,0x30},   // LCD Pixel Clock Configuration Register (CLKI 22MHz/4)
    {0x0018,0x00},   // CRT/TV Pixel Clock Configuration Register
    {0x001C,0x00},   // MediaPlug Clock Configuration Register(10MHz)
    {0x001E,0x00},   // CPU To Memory Wait State Select Register
    {0x0020,0x80},   // Memory Configuration Register
    {0x0021,0x03},   // DRAM Refresh Rate Register
    {0x002A,0x00},   // DRAM Timings Control Register 0
    {0x002B,0x01},   // DRAM Timings Control Register 1
    {0x0030,0x25},   // Panel Type Register
    {0x0031,0x00},   // MOD Rate Register
    {0x0032,0x1d},   // LCD Horizontal Display Width Register
    {0x0034,0x05},   // LCD Horizontal Non-Display Period Register
    {0x0035,0x01},   // TFT FPLINE Start Position Register
    {0x0036,0x01},   // TFT FPLINE Pulse Width Register
    {0x0038,0x3F},   // LCD Vertical Display Height Register 0
    {0x0039,0x01},   // LCD Vertical Display Height Register 1
    {0x003A,0x0b},   // LCD Vertical Non-Display Period Register
    {0x003B,0x07},   // TFT FPFRAME Start Position Register
    {0x003C,0x02},   // TFT FPFRAME Pulse Width Register

    {0x0041,0x00},   // LCD Miscellaneous Register
#if (SWIVEL_VIEW == 0)
    {0x0042,0x00},   // LCD Display Start Address Register 0
    {0x0043,0x00},   // LCD Display Start Address Register 1
    {0x0044,0x00},   // LCD Display Start Address Register 2

#elif (SWIVEL_VIEW == 1)
    // 1024 - W(320) = 0x2C0
    {0x0042,0xC0},   // LCD Display Start Address Register 0
    {0x0043,0x02},   // LCD Display Start Address Register 1
    {0x0044,0x00},   // LCD Display Start Address Register 2
    // 1024
    {0x0046,0x00},   // LCD Memory Address Offset Register 0
    {0x0047,0x02},   // LCD Memory Address Offset Register 1
#else
#error unsupported SWIVEL_VIEW mode
#endif
#else
#error no platform configuration
#endif  /* CONFIG_PLAT_XXX */

    {0x0048,0x00},   // LCD Pixel Panning Register
    {0x004A,0x00},   // LCD Display FIFO High Threshold Control Register
    {0x004B,0x00},   // LCD Display FIFO Low Threshold Control Register
    {0x0050,0x4F},   // CRT/TV Horizontal Display Width Register
    {0x0052,0x13},   // CRT/TV Horizontal Non-Display Period Register
    {0x0053,0x01},   // CRT/TV HRTC Start Position Register
    {0x0054,0x0B},   // CRT/TV HRTC Pulse Width Register
    {0x0056,0xDF},   // CRT/TV Vertical Display Height Register 0
    {0x0057,0x01},   // CRT/TV Vertical Display Height Register 1
    {0x0058,0x2B},   // CRT/TV Vertical Non-Display Period Register
    {0x0059,0x09},   // CRT/TV VRTC Start Position Register
    {0x005A,0x01},   // CRT/TV VRTC Pulse Width Register
    {0x005B,0x10},   // TV Output Control Register

    {0x0062,0x00},   // CRT/TV Display Start Address Register 0
    {0x0063,0x00},   // CRT/TV Display Start Address Register 1
    {0x0064,0x00},   // CRT/TV Display Start Address Register 2

    {0x0068,0x00},   // CRT/TV Pixel Panning Register
    {0x006A,0x00},   // CRT/TV Display FIFO High Threshold Control Register
    {0x006B,0x00},   // CRT/TV Display FIFO Low Threshold Control Register
    {0x0070,0x00},   // LCD Ink/Cursor Control Register
    {0x0071,0x01},   // LCD Ink/Cursor Start Address Register
    {0x0072,0x00},   // LCD Cursor X Position Register 0
    {0x0073,0x00},   // LCD Cursor X Position Register 1
    {0x0074,0x00},   // LCD Cursor Y Position Register 0
    {0x0075,0x00},   // LCD Cursor Y Position Register 1
    {0x0076,0x00},   // LCD Ink/Cursor Blue Color 0 Register
    {0x0077,0x00},   // LCD Ink/Cursor Green Color 0 Register
    {0x0078,0x00},   // LCD Ink/Cursor Red Color 0 Register
    {0x007A,0x1F},   // LCD Ink/Cursor Blue Color 1 Register
    {0x007B,0x3F},   // LCD Ink/Cursor Green Color 1 Register
    {0x007C,0x1F},   // LCD Ink/Cursor Red Color 1 Register
    {0x007E,0x00},   // LCD Ink/Cursor FIFO Threshold Register
    {0x0080,0x00},   // CRT/TV Ink/Cursor Control Register
    {0x0081,0x01},   // CRT/TV Ink/Cursor Start Address Register
    {0x0082,0x00},   // CRT/TV Cursor X Position Register 0
    {0x0083,0x00},   // CRT/TV Cursor X Position Register 1
    {0x0084,0x00},   // CRT/TV Cursor Y Position Register 0
    {0x0085,0x00},   // CRT/TV Cursor Y Position Register 1
    {0x0086,0x00},   // CRT/TV Ink/Cursor Blue Color 0 Register
    {0x0087,0x00},   // CRT/TV Ink/Cursor Green Color 0 Register
    {0x0088,0x00},   // CRT/TV Ink/Cursor Red Color 0 Register
    {0x008A,0x1F},   // CRT/TV Ink/Cursor Blue Color 1 Register
    {0x008B,0x3F},   // CRT/TV Ink/Cursor Green Color 1 Register
    {0x008C,0x1F},   // CRT/TV Ink/Cursor Red Color 1 Register
    {0x008E,0x00},   // CRT/TV Ink/Cursor FIFO Threshold Register
    {0x0100,0x00},   // BitBlt Control Register 0
    {0x0101,0x00},   // BitBlt Control Register 1
    {0x0102,0x00},   // BitBlt ROP Code/Color Expansion Register
    {0x0103,0x00},   // BitBlt Operation Register
    {0x0104,0x00},   // BitBlt Source Start Address Register 0
    {0x0105,0x00},   // BitBlt Source Start Address Register 1
    {0x0106,0x00},   // BitBlt Source Start Address Register 2
    {0x0108,0x00},   // BitBlt Destination Start Address Register 0
    {0x0109,0x00},   // BitBlt Destination Start Address Register 1
    {0x010A,0x00},   // BitBlt Destination Start Address Register 2
    {0x010C,0x00},   // BitBlt Memory Address Offset Register 0
    {0x010D,0x00},   // BitBlt Memory Address Offset Register 1
    {0x0110,0x00},   // BitBlt Width Register 0
    {0x0111,0x00},   // BitBlt Width Register 1
    {0x0112,0x00},   // BitBlt Height Register 0
    {0x0113,0x00},   // BitBlt Height Register 1
    {0x0114,0x00},   // BitBlt Background Color Register 0
    {0x0115,0x00},   // BitBlt Background Color Register 1
    {0x0118,0x00},   // BitBlt Foreground Color Register 0
    {0x0119,0x00},   // BitBlt Foreground Color Register 1
    {0x01E0,0x00},   // Look-Up Table Mode Register
    {0x01E2,0x00},   // Look-Up Table Address Register
    {0x01F0,0x10},   // Power Save Configuration Register
    {0x01F1,0x00},   // Power Save Status Register
    {0x01F4,0x00},   // CPU-to-Memory Access Watchdog Timer Register
#if (SWIVEL_VIEW == 0)
    {0x01FC,0x01},   // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
#elif (SWIVEL_VIEW == 1)
    {0x01FC,0x41},   // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
#else
#error unsupported SWIVEL_VIEW mode
#endif  /* SWIVEL_VIEW */

#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
    {0x0008,0x07},   // LCD panel Vdd & Vg on
#endif

    {0x0040,0x05},   // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
#if defined(CONFIG_PLAT_MAPPI)
    {0x0046,0x80},   // LCD Memory Address Offset Register 0
    {0x0047,0x02},   // LCD Memory Address Offset Register 1
#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
    {0x0046,0xf0},   // LCD Memory Address Offset Register 0
    {0x0047,0x00},   // LCD Memory Address Offset Register 1
#endif
    {0x0060,0x05},   // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
    {0x0066,0x80},   // CRT/TV Memory Address Offset Register 0	// takeo
    {0x0067,0x02},   // CRT/TV Memory Address Offset Register 1
};