| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485 |
- /*
- * Support for 'mpc5200-simple-platform' compatible boards.
- *
- * Written by Marian Balakowicz <m8@semihalf.com>
- * Copyright (C) 2007 Semihalf
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Description:
- * This code implements support for a simple MPC52xx based boards which
- * do not need a custom platform specific setup. Such boards are
- * supported assuming the following:
- *
- * - GPIO pins are configured by the firmware,
- * - CDM configuration (clocking) is setup correctly by firmware,
- * - if the 'fsl,has-wdt' property is present in one of the
- * gpt nodes, then it is safe to use such gpt to reset the board,
- * - PCI is supported if enabled in the kernel configuration
- * and if there is a PCI bus node defined in the device tree.
- *
- * Boards that are compatible with this generic platform support
- * are listed in a 'board' table.
- */
- #undef DEBUG
- #include <asm/time.h>
- #include <asm/prom.h>
- #include <asm/machdep.h>
- #include <asm/mpc52xx.h>
- /*
- * Setup the architecture
- */
- static void __init mpc5200_simple_setup_arch(void)
- {
- if (ppc_md.progress)
- ppc_md.progress("mpc5200_simple_setup_arch()", 0);
- /* Map important registers from the internal memory map */
- mpc52xx_map_common_devices();
- /* Some mpc5200 & mpc5200b related configuration */
- mpc5200_setup_xlb_arbiter();
- mpc52xx_setup_pci();
- }
- /* list of the supported boards */
- static const char *board[] __initdata = {
- "anonymous,a3m071",
- "anonymous,a4m072",
- "anon,charon",
- "ifm,o2d",
- "intercontrol,digsy-mtc",
- "manroland,mucmc52",
- "manroland,uc101",
- "phytec,pcm030",
- "phytec,pcm032",
- "promess,motionpro",
- "schindler,cm5200",
- "tqc,tqm5200",
- NULL
- };
- /*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
- static int __init mpc5200_simple_probe(void)
- {
- return of_flat_dt_match(of_get_flat_dt_root(), board);
- }
- define_machine(mpc5200_simple_platform) {
- .name = "mpc5200-simple-platform",
- .probe = mpc5200_simple_probe,
- .setup_arch = mpc5200_simple_setup_arch,
- .init = mpc52xx_declare_of_platform_devices,
- .init_IRQ = mpc52xx_init_irq,
- .get_irq = mpc52xx_get_irq,
- .restart = mpc52xx_restart,
- .calibrate_decr = generic_calibrate_decr,
- };
|
