| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158 |
- /*
- * Copyright IBM Corp 2000, 2011
- * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
- * Denis Joseph Barrow,
- */
- #include <linux/linkage.h>
- #include <asm/asm-offsets.h>
- #include <asm/nospec-insn.h>
- #include <asm/sigp.h>
- GEN_BR_THUNK %r14
- #
- # store_status
- #
- # Prerequisites to run this function:
- # - Prefix register is set to zero
- # - Original prefix register is stored in "dump_prefix_page"
- # - Lowcore protection is off
- #
- ENTRY(store_status)
- /* Save register one and load save area base */
- stg %r1,__LC_SAVE_AREA_RESTART
- lghi %r1,SAVE_AREA_BASE
- /* General purpose registers */
- stmg %r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- lg %r2,__LC_SAVE_AREA_RESTART
- stg %r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
- /* Control registers */
- stctg %c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- /* Access registers */
- stam %a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- /* Floating point registers */
- std %f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- std %f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
- /* Floating point control register */
- stfpc __LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
- /* CPU timer */
- stpt __LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
- /* Saved prefix register */
- larl %r2,dump_prefix_page
- mvc __LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
- /* Clock comparator - seven bytes */
- larl %r2,.Lclkcmp
- stckc 0(%r2)
- mvc __LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
- /* Program status word */
- epsw %r2,%r3
- st %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
- st %r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
- larl %r2,store_status
- stg %r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
- BR_EX %r14
- .section .bss
- .align 8
- .Lclkcmp: .quad 0x0000000000000000
- .previous
- #
- # do_reipl_asm
- # Parameter: r2 = schid of reipl device
- #
- ENTRY(do_reipl_asm)
- basr %r13,0
- .Lpg0: lpswe .Lnewpsw-.Lpg0(%r13)
- .Lpg1: brasl %r14,store_status
- lctlg %c6,%c6,.Lall-.Lpg0(%r13)
- lgr %r1,%r2
- mvc __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
- stsch .Lschib-.Lpg0(%r13)
- oi .Lschib+5-.Lpg0(%r13),0x84
- .Lecs: xi .Lschib+27-.Lpg0(%r13),0x01
- msch .Lschib-.Lpg0(%r13)
- lghi %r0,5
- .Lssch: ssch .Liplorb-.Lpg0(%r13)
- jz .L001
- brct %r0,.Lssch
- bas %r14,.Ldisab-.Lpg0(%r13)
- .L001: mvc __LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)
- .Ltpi: lpswe .Lwaitpsw-.Lpg0(%r13)
- .Lcont: c %r1,__LC_SUBCHANNEL_ID
- jnz .Ltpi
- clc __LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
- jnz .Ltpi
- tsch .Liplirb-.Lpg0(%r13)
- tm .Liplirb+9-.Lpg0(%r13),0xbf
- jz .L002
- bas %r14,.Ldisab-.Lpg0(%r13)
- .L002: tm .Liplirb+8-.Lpg0(%r13),0xf3
- jz .L003
- bas %r14,.Ldisab-.Lpg0(%r13)
- .L003: st %r1,__LC_SUBCHANNEL_ID
- lhi %r1,0 # mode 0 = esa
- slr %r0,%r0 # set cpuid to zero
- sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode
- lpsw 0
- .Ldisab: sll %r14,1
- srl %r14,1 # need to kill hi bit to avoid specification exceptions.
- st %r14,.Ldispsw+12-.Lpg0(%r13)
- lpswe .Ldispsw-.Lpg0(%r13)
- .align 8
- .Lall: .quad 0x00000000ff000000
- .align 16
- /*
- * These addresses have to be 31 bit otherwise
- * the sigp will throw a specifcation exception
- * when switching to ESA mode as bit 31 be set
- * in the ESA psw.
- * Bit 31 of the addresses has to be 0 for the
- * 31bit lpswe instruction a fact they appear to have
- * omitted from the pop.
- */
- .Lnewpsw: .quad 0x0000000080000000
- .quad .Lpg1
- .Lpcnew: .quad 0x0000000080000000
- .quad .Lecs
- .Lionew: .quad 0x0000000080000000
- .quad .Lcont
- .Lwaitpsw: .quad 0x0202000080000000
- .quad .Ltpi
- .Ldispsw: .quad 0x0002000080000000
- .quad 0x0000000000000000
- .Liplccws: .long 0x02000000,0x60000018
- .long 0x08000008,0x20000001
- .Liplorb: .long 0x0049504c,0x0040ff80
- .long 0x00000000+.Liplccws
- .Lschib: .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .Liplirb: .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
- .long 0x00000000,0x00000000
|
