libata-pmp.c 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113
  1. /*
  2. * libata-pmp.c - libata port multiplier support
  3. *
  4. * Copyright (c) 2007 SUSE Linux Products GmbH
  5. * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
  6. *
  7. * This file is released under the GPLv2.
  8. */
  9. #include <linux/kernel.h>
  10. #include <linux/export.h>
  11. #include <linux/libata.h>
  12. #include <linux/slab.h>
  13. #include "libata.h"
  14. #include "libata-transport.h"
  15. const struct ata_port_operations sata_pmp_port_ops = {
  16. .inherits = &sata_port_ops,
  17. .pmp_prereset = ata_std_prereset,
  18. .pmp_hardreset = sata_std_hardreset,
  19. .pmp_postreset = ata_std_postreset,
  20. .error_handler = sata_pmp_error_handler,
  21. };
  22. /**
  23. * sata_pmp_read - read PMP register
  24. * @link: link to read PMP register for
  25. * @reg: register to read
  26. * @r_val: resulting value
  27. *
  28. * Read PMP register.
  29. *
  30. * LOCKING:
  31. * Kernel thread context (may sleep).
  32. *
  33. * RETURNS:
  34. * 0 on success, AC_ERR_* mask on failure.
  35. */
  36. static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val)
  37. {
  38. struct ata_port *ap = link->ap;
  39. struct ata_device *pmp_dev = ap->link.device;
  40. struct ata_taskfile tf;
  41. unsigned int err_mask;
  42. ata_tf_init(pmp_dev, &tf);
  43. tf.command = ATA_CMD_PMP_READ;
  44. tf.protocol = ATA_PROT_NODATA;
  45. tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
  46. tf.feature = reg;
  47. tf.device = link->pmp;
  48. err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
  49. SATA_PMP_RW_TIMEOUT);
  50. if (err_mask)
  51. return err_mask;
  52. *r_val = tf.nsect | tf.lbal << 8 | tf.lbam << 16 | tf.lbah << 24;
  53. return 0;
  54. }
  55. /**
  56. * sata_pmp_write - write PMP register
  57. * @link: link to write PMP register for
  58. * @reg: register to write
  59. * @r_val: value to write
  60. *
  61. * Write PMP register.
  62. *
  63. * LOCKING:
  64. * Kernel thread context (may sleep).
  65. *
  66. * RETURNS:
  67. * 0 on success, AC_ERR_* mask on failure.
  68. */
  69. static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val)
  70. {
  71. struct ata_port *ap = link->ap;
  72. struct ata_device *pmp_dev = ap->link.device;
  73. struct ata_taskfile tf;
  74. ata_tf_init(pmp_dev, &tf);
  75. tf.command = ATA_CMD_PMP_WRITE;
  76. tf.protocol = ATA_PROT_NODATA;
  77. tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
  78. tf.feature = reg;
  79. tf.device = link->pmp;
  80. tf.nsect = val & 0xff;
  81. tf.lbal = (val >> 8) & 0xff;
  82. tf.lbam = (val >> 16) & 0xff;
  83. tf.lbah = (val >> 24) & 0xff;
  84. return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
  85. SATA_PMP_RW_TIMEOUT);
  86. }
  87. /**
  88. * sata_pmp_qc_defer_cmd_switch - qc_defer for command switching PMP
  89. * @qc: ATA command in question
  90. *
  91. * A host which has command switching PMP support cannot issue
  92. * commands to multiple links simultaneously.
  93. *
  94. * LOCKING:
  95. * spin_lock_irqsave(host lock)
  96. *
  97. * RETURNS:
  98. * ATA_DEFER_* if deferring is needed, 0 otherwise.
  99. */
  100. int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc)
  101. {
  102. struct ata_link *link = qc->dev->link;
  103. struct ata_port *ap = link->ap;
  104. if (ap->excl_link == NULL || ap->excl_link == link) {
  105. if (ap->nr_active_links == 0 || ata_link_active(link)) {
  106. qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
  107. return ata_std_qc_defer(qc);
  108. }
  109. ap->excl_link = link;
  110. }
  111. return ATA_DEFER_PORT;
  112. }
  113. /**
  114. * sata_pmp_scr_read - read PSCR
  115. * @link: ATA link to read PSCR for
  116. * @reg: PSCR to read
  117. * @r_val: resulting value
  118. *
  119. * Read PSCR @reg into @r_val for @link, to be called from
  120. * ata_scr_read().
  121. *
  122. * LOCKING:
  123. * Kernel thread context (may sleep).
  124. *
  125. * RETURNS:
  126. * 0 on success, -errno on failure.
  127. */
  128. int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *r_val)
  129. {
  130. unsigned int err_mask;
  131. if (reg > SATA_PMP_PSCR_CONTROL)
  132. return -EINVAL;
  133. err_mask = sata_pmp_read(link, reg, r_val);
  134. if (err_mask) {
  135. ata_link_warn(link, "failed to read SCR %d (Emask=0x%x)\n",
  136. reg, err_mask);
  137. return -EIO;
  138. }
  139. return 0;
  140. }
  141. /**
  142. * sata_pmp_scr_write - write PSCR
  143. * @link: ATA link to write PSCR for
  144. * @reg: PSCR to write
  145. * @val: value to be written
  146. *
  147. * Write @val to PSCR @reg for @link, to be called from
  148. * ata_scr_write() and ata_scr_write_flush().
  149. *
  150. * LOCKING:
  151. * Kernel thread context (may sleep).
  152. *
  153. * RETURNS:
  154. * 0 on success, -errno on failure.
  155. */
  156. int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
  157. {
  158. unsigned int err_mask;
  159. if (reg > SATA_PMP_PSCR_CONTROL)
  160. return -EINVAL;
  161. err_mask = sata_pmp_write(link, reg, val);
  162. if (err_mask) {
  163. ata_link_warn(link, "failed to write SCR %d (Emask=0x%x)\n",
  164. reg, err_mask);
  165. return -EIO;
  166. }
  167. return 0;
  168. }
  169. /**
  170. * sata_pmp_set_lpm - configure LPM for a PMP link
  171. * @link: PMP link to configure LPM for
  172. * @policy: target LPM policy
  173. * @hints: LPM hints
  174. *
  175. * Configure LPM for @link. This function will contain any PMP
  176. * specific workarounds if necessary.
  177. *
  178. * LOCKING:
  179. * EH context.
  180. *
  181. * RETURNS:
  182. * 0 on success, -errno on failure.
  183. */
  184. int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
  185. unsigned hints)
  186. {
  187. return sata_link_scr_lpm(link, policy, true);
  188. }
  189. /**
  190. * sata_pmp_read_gscr - read GSCR block of SATA PMP
  191. * @dev: PMP device
  192. * @gscr: buffer to read GSCR block into
  193. *
  194. * Read selected PMP GSCRs from the PMP at @dev. This will serve
  195. * as configuration and identification info for the PMP.
  196. *
  197. * LOCKING:
  198. * Kernel thread context (may sleep).
  199. *
  200. * RETURNS:
  201. * 0 on success, -errno on failure.
  202. */
  203. static int sata_pmp_read_gscr(struct ata_device *dev, u32 *gscr)
  204. {
  205. static const int gscr_to_read[] = { 0, 1, 2, 32, 33, 64, 96 };
  206. int i;
  207. for (i = 0; i < ARRAY_SIZE(gscr_to_read); i++) {
  208. int reg = gscr_to_read[i];
  209. unsigned int err_mask;
  210. err_mask = sata_pmp_read(dev->link, reg, &gscr[reg]);
  211. if (err_mask) {
  212. ata_dev_err(dev, "failed to read PMP GSCR[%d] (Emask=0x%x)\n",
  213. reg, err_mask);
  214. return -EIO;
  215. }
  216. }
  217. return 0;
  218. }
  219. static const char *sata_pmp_spec_rev_str(const u32 *gscr)
  220. {
  221. u32 rev = gscr[SATA_PMP_GSCR_REV];
  222. if (rev & (1 << 3))
  223. return "1.2";
  224. if (rev & (1 << 2))
  225. return "1.1";
  226. if (rev & (1 << 1))
  227. return "1.0";
  228. return "<unknown>";
  229. }
  230. #define PMP_GSCR_SII_POL 129
  231. static int sata_pmp_configure(struct ata_device *dev, int print_info)
  232. {
  233. struct ata_port *ap = dev->link->ap;
  234. u32 *gscr = dev->gscr;
  235. u16 vendor = sata_pmp_gscr_vendor(gscr);
  236. u16 devid = sata_pmp_gscr_devid(gscr);
  237. unsigned int err_mask = 0;
  238. const char *reason;
  239. int nr_ports, rc;
  240. nr_ports = sata_pmp_gscr_ports(gscr);
  241. if (nr_ports <= 0 || nr_ports > SATA_PMP_MAX_PORTS) {
  242. rc = -EINVAL;
  243. reason = "invalid nr_ports";
  244. goto fail;
  245. }
  246. if ((ap->flags & ATA_FLAG_AN) &&
  247. (gscr[SATA_PMP_GSCR_FEAT] & SATA_PMP_FEAT_NOTIFY))
  248. dev->flags |= ATA_DFLAG_AN;
  249. /* monitor SERR_PHYRDY_CHG on fan-out ports */
  250. err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_ERROR_EN,
  251. SERR_PHYRDY_CHG);
  252. if (err_mask) {
  253. rc = -EIO;
  254. reason = "failed to write GSCR_ERROR_EN";
  255. goto fail;
  256. }
  257. /* Disable sending Early R_OK.
  258. * With "cached read" HDD testing and multiple ports busy on a SATA
  259. * host controller, 3x26 PMP will very rarely drop a deferred
  260. * R_OK that was intended for the host. Symptom will be all
  261. * 5 drives under test will timeout, get reset, and recover.
  262. */
  263. if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
  264. u32 reg;
  265. err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
  266. if (err_mask) {
  267. rc = -EIO;
  268. reason = "failed to read Sil3x26 Private Register";
  269. goto fail;
  270. }
  271. reg &= ~0x1;
  272. err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
  273. if (err_mask) {
  274. rc = -EIO;
  275. reason = "failed to write Sil3x26 Private Register";
  276. goto fail;
  277. }
  278. }
  279. if (print_info) {
  280. ata_dev_info(dev, "Port Multiplier %s, "
  281. "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
  282. sata_pmp_spec_rev_str(gscr), vendor, devid,
  283. sata_pmp_gscr_rev(gscr),
  284. nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN],
  285. gscr[SATA_PMP_GSCR_FEAT]);
  286. if (!(dev->flags & ATA_DFLAG_AN))
  287. ata_dev_info(dev,
  288. "Asynchronous notification not supported, "
  289. "hotplug won't work on fan-out ports. Use warm-plug instead.\n");
  290. }
  291. return 0;
  292. fail:
  293. ata_dev_err(dev,
  294. "failed to configure Port Multiplier (%s, Emask=0x%x)\n",
  295. reason, err_mask);
  296. return rc;
  297. }
  298. static int sata_pmp_init_links (struct ata_port *ap, int nr_ports)
  299. {
  300. struct ata_link *pmp_link = ap->pmp_link;
  301. int i, err;
  302. if (!pmp_link) {
  303. pmp_link = kzalloc(sizeof(pmp_link[0]) * SATA_PMP_MAX_PORTS,
  304. GFP_NOIO);
  305. if (!pmp_link)
  306. return -ENOMEM;
  307. for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
  308. ata_link_init(ap, &pmp_link[i], i);
  309. ap->pmp_link = pmp_link;
  310. for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
  311. err = ata_tlink_add(&pmp_link[i]);
  312. if (err) {
  313. goto err_tlink;
  314. }
  315. }
  316. }
  317. for (i = 0; i < nr_ports; i++) {
  318. struct ata_link *link = &pmp_link[i];
  319. struct ata_eh_context *ehc = &link->eh_context;
  320. link->flags = 0;
  321. ehc->i.probe_mask |= ATA_ALL_DEVICES;
  322. ehc->i.action |= ATA_EH_RESET;
  323. }
  324. return 0;
  325. err_tlink:
  326. while (--i >= 0)
  327. ata_tlink_delete(&pmp_link[i]);
  328. kfree(pmp_link);
  329. ap->pmp_link = NULL;
  330. return err;
  331. }
  332. static void sata_pmp_quirks(struct ata_port *ap)
  333. {
  334. u32 *gscr = ap->link.device->gscr;
  335. u16 vendor = sata_pmp_gscr_vendor(gscr);
  336. u16 devid = sata_pmp_gscr_devid(gscr);
  337. struct ata_link *link;
  338. if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
  339. /* sil3x26 quirks */
  340. ata_for_each_link(link, ap, EDGE) {
  341. /* link reports offline after LPM */
  342. link->flags |= ATA_LFLAG_NO_LPM;
  343. /*
  344. * Class code report is unreliable and SRST times
  345. * out under certain configurations.
  346. */
  347. if (link->pmp < 5)
  348. link->flags |= ATA_LFLAG_NO_SRST |
  349. ATA_LFLAG_ASSUME_ATA;
  350. /* port 5 is for SEMB device and it doesn't like SRST */
  351. if (link->pmp == 5)
  352. link->flags |= ATA_LFLAG_NO_SRST |
  353. ATA_LFLAG_ASSUME_SEMB;
  354. }
  355. } else if (vendor == 0x1095 && devid == 0x4723) {
  356. /*
  357. * sil4723 quirks
  358. *
  359. * Link reports offline after LPM. Class code report is
  360. * unreliable. SIMG PMPs never got SRST reliable and the
  361. * config device at port 2 locks up on SRST.
  362. */
  363. ata_for_each_link(link, ap, EDGE)
  364. link->flags |= ATA_LFLAG_NO_LPM |
  365. ATA_LFLAG_NO_SRST |
  366. ATA_LFLAG_ASSUME_ATA;
  367. } else if (vendor == 0x1095 && devid == 0x4726) {
  368. /* sil4726 quirks */
  369. ata_for_each_link(link, ap, EDGE) {
  370. /* link reports offline after LPM */
  371. link->flags |= ATA_LFLAG_NO_LPM;
  372. /* Class code report is unreliable and SRST
  373. * times out under certain configurations.
  374. * Config device can be at port 0 or 5 and
  375. * locks up on SRST.
  376. */
  377. if (link->pmp <= 5)
  378. link->flags |= ATA_LFLAG_NO_SRST |
  379. ATA_LFLAG_ASSUME_ATA;
  380. /* Port 6 is for SEMB device which doesn't
  381. * like SRST either.
  382. */
  383. if (link->pmp == 6)
  384. link->flags |= ATA_LFLAG_NO_SRST |
  385. ATA_LFLAG_ASSUME_SEMB;
  386. }
  387. } else if (vendor == 0x1095 && (devid == 0x5723 || devid == 0x5733 ||
  388. devid == 0x5734 || devid == 0x5744)) {
  389. /* sil5723/5744 quirks */
  390. /* sil5723/5744 has either two or three downstream
  391. * ports depending on operation mode. The last port
  392. * is empty if any actual IO device is available or
  393. * occupied by a pseudo configuration device
  394. * otherwise. Don't try hard to recover it.
  395. */
  396. ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
  397. } else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) {
  398. /*
  399. * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350?
  400. * 0x0325: jmicron JMB394.
  401. */
  402. ata_for_each_link(link, ap, EDGE) {
  403. /* SRST breaks detection and disks get misclassified
  404. * LPM disabled to avoid potential problems
  405. */
  406. link->flags |= ATA_LFLAG_NO_LPM |
  407. ATA_LFLAG_NO_SRST |
  408. ATA_LFLAG_ASSUME_ATA;
  409. }
  410. } else if (vendor == 0x11ab && devid == 0x4140) {
  411. /* Marvell 4140 quirks */
  412. ata_for_each_link(link, ap, EDGE) {
  413. /* port 4 is for SEMB device and it doesn't like SRST */
  414. if (link->pmp == 4)
  415. link->flags |= ATA_LFLAG_DISABLED;
  416. }
  417. }
  418. }
  419. /**
  420. * sata_pmp_attach - attach a SATA PMP device
  421. * @dev: SATA PMP device to attach
  422. *
  423. * Configure and attach SATA PMP device @dev. This function is
  424. * also responsible for allocating and initializing PMP links.
  425. *
  426. * LOCKING:
  427. * Kernel thread context (may sleep).
  428. *
  429. * RETURNS:
  430. * 0 on success, -errno on failure.
  431. */
  432. int sata_pmp_attach(struct ata_device *dev)
  433. {
  434. struct ata_link *link = dev->link;
  435. struct ata_port *ap = link->ap;
  436. unsigned long flags;
  437. struct ata_link *tlink;
  438. int rc;
  439. /* is it hanging off the right place? */
  440. if (!sata_pmp_supported(ap)) {
  441. ata_dev_err(dev, "host does not support Port Multiplier\n");
  442. return -EINVAL;
  443. }
  444. if (!ata_is_host_link(link)) {
  445. ata_dev_err(dev, "Port Multipliers cannot be nested\n");
  446. return -EINVAL;
  447. }
  448. if (dev->devno) {
  449. ata_dev_err(dev, "Port Multiplier must be the first device\n");
  450. return -EINVAL;
  451. }
  452. WARN_ON(link->pmp != 0);
  453. link->pmp = SATA_PMP_CTRL_PORT;
  454. /* read GSCR block */
  455. rc = sata_pmp_read_gscr(dev, dev->gscr);
  456. if (rc)
  457. goto fail;
  458. /* config PMP */
  459. rc = sata_pmp_configure(dev, 1);
  460. if (rc)
  461. goto fail;
  462. rc = sata_pmp_init_links(ap, sata_pmp_gscr_ports(dev->gscr));
  463. if (rc) {
  464. ata_dev_info(dev, "failed to initialize PMP links\n");
  465. goto fail;
  466. }
  467. /* attach it */
  468. spin_lock_irqsave(ap->lock, flags);
  469. WARN_ON(ap->nr_pmp_links);
  470. ap->nr_pmp_links = sata_pmp_gscr_ports(dev->gscr);
  471. spin_unlock_irqrestore(ap->lock, flags);
  472. sata_pmp_quirks(ap);
  473. if (ap->ops->pmp_attach)
  474. ap->ops->pmp_attach(ap);
  475. ata_for_each_link(tlink, ap, EDGE)
  476. sata_link_init_spd(tlink);
  477. return 0;
  478. fail:
  479. link->pmp = 0;
  480. return rc;
  481. }
  482. /**
  483. * sata_pmp_detach - detach a SATA PMP device
  484. * @dev: SATA PMP device to detach
  485. *
  486. * Detach SATA PMP device @dev. This function is also
  487. * responsible for deconfiguring PMP links.
  488. *
  489. * LOCKING:
  490. * Kernel thread context (may sleep).
  491. */
  492. static void sata_pmp_detach(struct ata_device *dev)
  493. {
  494. struct ata_link *link = dev->link;
  495. struct ata_port *ap = link->ap;
  496. struct ata_link *tlink;
  497. unsigned long flags;
  498. ata_dev_info(dev, "Port Multiplier detaching\n");
  499. WARN_ON(!ata_is_host_link(link) || dev->devno ||
  500. link->pmp != SATA_PMP_CTRL_PORT);
  501. if (ap->ops->pmp_detach)
  502. ap->ops->pmp_detach(ap);
  503. ata_for_each_link(tlink, ap, EDGE)
  504. ata_eh_detach_dev(tlink->device);
  505. spin_lock_irqsave(ap->lock, flags);
  506. ap->nr_pmp_links = 0;
  507. link->pmp = 0;
  508. spin_unlock_irqrestore(ap->lock, flags);
  509. }
  510. /**
  511. * sata_pmp_same_pmp - does new GSCR matches the configured PMP?
  512. * @dev: PMP device to compare against
  513. * @new_gscr: GSCR block of the new device
  514. *
  515. * Compare @new_gscr against @dev and determine whether @dev is
  516. * the PMP described by @new_gscr.
  517. *
  518. * LOCKING:
  519. * None.
  520. *
  521. * RETURNS:
  522. * 1 if @dev matches @new_gscr, 0 otherwise.
  523. */
  524. static int sata_pmp_same_pmp(struct ata_device *dev, const u32 *new_gscr)
  525. {
  526. const u32 *old_gscr = dev->gscr;
  527. u16 old_vendor, new_vendor, old_devid, new_devid;
  528. int old_nr_ports, new_nr_ports;
  529. old_vendor = sata_pmp_gscr_vendor(old_gscr);
  530. new_vendor = sata_pmp_gscr_vendor(new_gscr);
  531. old_devid = sata_pmp_gscr_devid(old_gscr);
  532. new_devid = sata_pmp_gscr_devid(new_gscr);
  533. old_nr_ports = sata_pmp_gscr_ports(old_gscr);
  534. new_nr_ports = sata_pmp_gscr_ports(new_gscr);
  535. if (old_vendor != new_vendor) {
  536. ata_dev_info(dev,
  537. "Port Multiplier vendor mismatch '0x%x' != '0x%x'\n",
  538. old_vendor, new_vendor);
  539. return 0;
  540. }
  541. if (old_devid != new_devid) {
  542. ata_dev_info(dev,
  543. "Port Multiplier device ID mismatch '0x%x' != '0x%x'\n",
  544. old_devid, new_devid);
  545. return 0;
  546. }
  547. if (old_nr_ports != new_nr_ports) {
  548. ata_dev_info(dev,
  549. "Port Multiplier nr_ports mismatch '0x%x' != '0x%x'\n",
  550. old_nr_ports, new_nr_ports);
  551. return 0;
  552. }
  553. return 1;
  554. }
  555. /**
  556. * sata_pmp_revalidate - revalidate SATA PMP
  557. * @dev: PMP device to revalidate
  558. * @new_class: new class code
  559. *
  560. * Re-read GSCR block and make sure @dev is still attached to the
  561. * port and properly configured.
  562. *
  563. * LOCKING:
  564. * Kernel thread context (may sleep).
  565. *
  566. * RETURNS:
  567. * 0 on success, -errno otherwise.
  568. */
  569. static int sata_pmp_revalidate(struct ata_device *dev, unsigned int new_class)
  570. {
  571. struct ata_link *link = dev->link;
  572. struct ata_port *ap = link->ap;
  573. u32 *gscr = (void *)ap->sector_buf;
  574. int rc;
  575. DPRINTK("ENTER\n");
  576. ata_eh_about_to_do(link, NULL, ATA_EH_REVALIDATE);
  577. if (!ata_dev_enabled(dev)) {
  578. rc = -ENODEV;
  579. goto fail;
  580. }
  581. /* wrong class? */
  582. if (ata_class_enabled(new_class) && new_class != ATA_DEV_PMP) {
  583. rc = -ENODEV;
  584. goto fail;
  585. }
  586. /* read GSCR */
  587. rc = sata_pmp_read_gscr(dev, gscr);
  588. if (rc)
  589. goto fail;
  590. /* is the pmp still there? */
  591. if (!sata_pmp_same_pmp(dev, gscr)) {
  592. rc = -ENODEV;
  593. goto fail;
  594. }
  595. memcpy(dev->gscr, gscr, sizeof(gscr[0]) * SATA_PMP_GSCR_DWORDS);
  596. rc = sata_pmp_configure(dev, 0);
  597. if (rc)
  598. goto fail;
  599. ata_eh_done(link, NULL, ATA_EH_REVALIDATE);
  600. DPRINTK("EXIT, rc=0\n");
  601. return 0;
  602. fail:
  603. ata_dev_err(dev, "PMP revalidation failed (errno=%d)\n", rc);
  604. DPRINTK("EXIT, rc=%d\n", rc);
  605. return rc;
  606. }
  607. /**
  608. * sata_pmp_revalidate_quick - revalidate SATA PMP quickly
  609. * @dev: PMP device to revalidate
  610. *
  611. * Make sure the attached PMP is accessible.
  612. *
  613. * LOCKING:
  614. * Kernel thread context (may sleep).
  615. *
  616. * RETURNS:
  617. * 0 on success, -errno otherwise.
  618. */
  619. static int sata_pmp_revalidate_quick(struct ata_device *dev)
  620. {
  621. unsigned int err_mask;
  622. u32 prod_id;
  623. err_mask = sata_pmp_read(dev->link, SATA_PMP_GSCR_PROD_ID, &prod_id);
  624. if (err_mask) {
  625. ata_dev_err(dev,
  626. "failed to read PMP product ID (Emask=0x%x)\n",
  627. err_mask);
  628. return -EIO;
  629. }
  630. if (prod_id != dev->gscr[SATA_PMP_GSCR_PROD_ID]) {
  631. ata_dev_err(dev, "PMP product ID mismatch\n");
  632. /* something weird is going on, request full PMP recovery */
  633. return -EIO;
  634. }
  635. return 0;
  636. }
  637. /**
  638. * sata_pmp_eh_recover_pmp - recover PMP
  639. * @ap: ATA port PMP is attached to
  640. * @prereset: prereset method (can be NULL)
  641. * @softreset: softreset method
  642. * @hardreset: hardreset method
  643. * @postreset: postreset method (can be NULL)
  644. *
  645. * Recover PMP attached to @ap. Recovery procedure is somewhat
  646. * similar to that of ata_eh_recover() except that reset should
  647. * always be performed in hard->soft sequence and recovery
  648. * failure results in PMP detachment.
  649. *
  650. * LOCKING:
  651. * Kernel thread context (may sleep).
  652. *
  653. * RETURNS:
  654. * 0 on success, -errno on failure.
  655. */
  656. static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
  657. ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
  658. ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
  659. {
  660. struct ata_link *link = &ap->link;
  661. struct ata_eh_context *ehc = &link->eh_context;
  662. struct ata_device *dev = link->device;
  663. int tries = ATA_EH_PMP_TRIES;
  664. int detach = 0, rc = 0;
  665. int reval_failed = 0;
  666. DPRINTK("ENTER\n");
  667. if (dev->flags & ATA_DFLAG_DETACH) {
  668. detach = 1;
  669. goto fail;
  670. }
  671. retry:
  672. ehc->classes[0] = ATA_DEV_UNKNOWN;
  673. if (ehc->i.action & ATA_EH_RESET) {
  674. struct ata_link *tlink;
  675. /* reset */
  676. rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
  677. postreset);
  678. if (rc) {
  679. ata_link_err(link, "failed to reset PMP, giving up\n");
  680. goto fail;
  681. }
  682. /* PMP is reset, SErrors cannot be trusted, scan all */
  683. ata_for_each_link(tlink, ap, EDGE) {
  684. struct ata_eh_context *ehc = &tlink->eh_context;
  685. ehc->i.probe_mask |= ATA_ALL_DEVICES;
  686. ehc->i.action |= ATA_EH_RESET;
  687. }
  688. }
  689. /* If revalidation is requested, revalidate and reconfigure;
  690. * otherwise, do quick revalidation.
  691. */
  692. if (ehc->i.action & ATA_EH_REVALIDATE)
  693. rc = sata_pmp_revalidate(dev, ehc->classes[0]);
  694. else
  695. rc = sata_pmp_revalidate_quick(dev);
  696. if (rc) {
  697. tries--;
  698. if (rc == -ENODEV) {
  699. ehc->i.probe_mask |= ATA_ALL_DEVICES;
  700. detach = 1;
  701. /* give it just two more chances */
  702. tries = min(tries, 2);
  703. }
  704. if (tries) {
  705. /* consecutive revalidation failures? speed down */
  706. if (reval_failed)
  707. sata_down_spd_limit(link, 0);
  708. else
  709. reval_failed = 1;
  710. ehc->i.action |= ATA_EH_RESET;
  711. goto retry;
  712. } else {
  713. ata_dev_err(dev,
  714. "failed to recover PMP after %d tries, giving up\n",
  715. ATA_EH_PMP_TRIES);
  716. goto fail;
  717. }
  718. }
  719. /* okay, PMP resurrected */
  720. ehc->i.flags = 0;
  721. DPRINTK("EXIT, rc=0\n");
  722. return 0;
  723. fail:
  724. sata_pmp_detach(dev);
  725. if (detach)
  726. ata_eh_detach_dev(dev);
  727. else
  728. ata_dev_disable(dev);
  729. DPRINTK("EXIT, rc=%d\n", rc);
  730. return rc;
  731. }
  732. static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
  733. {
  734. struct ata_link *link;
  735. unsigned long flags;
  736. int rc;
  737. spin_lock_irqsave(ap->lock, flags);
  738. ata_for_each_link(link, ap, EDGE) {
  739. if (!(link->flags & ATA_LFLAG_DISABLED))
  740. continue;
  741. spin_unlock_irqrestore(ap->lock, flags);
  742. /* Some PMPs require hardreset sequence to get
  743. * SError.N working.
  744. */
  745. sata_link_hardreset(link, sata_deb_timing_normal,
  746. ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK),
  747. NULL, NULL);
  748. /* unconditionally clear SError.N */
  749. rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
  750. if (rc) {
  751. ata_link_err(link,
  752. "failed to clear SError.N (errno=%d)\n",
  753. rc);
  754. return rc;
  755. }
  756. spin_lock_irqsave(ap->lock, flags);
  757. }
  758. spin_unlock_irqrestore(ap->lock, flags);
  759. return 0;
  760. }
  761. static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
  762. {
  763. struct ata_port *ap = link->ap;
  764. unsigned long flags;
  765. if (link_tries[link->pmp] && --link_tries[link->pmp])
  766. return 1;
  767. /* disable this link */
  768. if (!(link->flags & ATA_LFLAG_DISABLED)) {
  769. ata_link_warn(link,
  770. "failed to recover link after %d tries, disabling\n",
  771. ATA_EH_PMP_LINK_TRIES);
  772. spin_lock_irqsave(ap->lock, flags);
  773. link->flags |= ATA_LFLAG_DISABLED;
  774. spin_unlock_irqrestore(ap->lock, flags);
  775. }
  776. ata_dev_disable(link->device);
  777. link->eh_context.i.action = 0;
  778. return 0;
  779. }
  780. /**
  781. * sata_pmp_eh_recover - recover PMP-enabled port
  782. * @ap: ATA port to recover
  783. *
  784. * Drive EH recovery operation for PMP enabled port @ap. This
  785. * function recovers host and PMP ports with proper retrials and
  786. * fallbacks. Actual recovery operations are performed using
  787. * ata_eh_recover() and sata_pmp_eh_recover_pmp().
  788. *
  789. * LOCKING:
  790. * Kernel thread context (may sleep).
  791. *
  792. * RETURNS:
  793. * 0 on success, -errno on failure.
  794. */
  795. static int sata_pmp_eh_recover(struct ata_port *ap)
  796. {
  797. struct ata_port_operations *ops = ap->ops;
  798. int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
  799. struct ata_link *pmp_link = &ap->link;
  800. struct ata_device *pmp_dev = pmp_link->device;
  801. struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
  802. u32 *gscr = pmp_dev->gscr;
  803. struct ata_link *link;
  804. struct ata_device *dev;
  805. unsigned int err_mask;
  806. u32 gscr_error, sntf;
  807. int cnt, rc;
  808. pmp_tries = ATA_EH_PMP_TRIES;
  809. ata_for_each_link(link, ap, EDGE)
  810. link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
  811. retry:
  812. /* PMP attached? */
  813. if (!sata_pmp_attached(ap)) {
  814. rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
  815. ops->hardreset, ops->postreset, NULL);
  816. if (rc) {
  817. ata_for_each_dev(dev, &ap->link, ALL)
  818. ata_dev_disable(dev);
  819. return rc;
  820. }
  821. if (pmp_dev->class != ATA_DEV_PMP)
  822. return 0;
  823. /* new PMP online */
  824. ata_for_each_link(link, ap, EDGE)
  825. link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
  826. /* fall through */
  827. }
  828. /* recover pmp */
  829. rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
  830. ops->hardreset, ops->postreset);
  831. if (rc)
  832. goto pmp_fail;
  833. /* PHY event notification can disturb reset and other recovery
  834. * operations. Turn it off.
  835. */
  836. if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
  837. gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
  838. err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
  839. gscr[SATA_PMP_GSCR_FEAT_EN]);
  840. if (err_mask) {
  841. ata_link_warn(pmp_link,
  842. "failed to disable NOTIFY (err_mask=0x%x)\n",
  843. err_mask);
  844. goto pmp_fail;
  845. }
  846. }
  847. /* handle disabled links */
  848. rc = sata_pmp_eh_handle_disabled_links(ap);
  849. if (rc)
  850. goto pmp_fail;
  851. /* recover links */
  852. rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
  853. ops->pmp_hardreset, ops->pmp_postreset, &link);
  854. if (rc)
  855. goto link_fail;
  856. /* clear SNotification */
  857. rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
  858. if (rc == 0)
  859. sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
  860. /*
  861. * If LPM is active on any fan-out port, hotplug wouldn't
  862. * work. Return w/ PHY event notification disabled.
  863. */
  864. ata_for_each_link(link, ap, EDGE)
  865. if (link->lpm_policy > ATA_LPM_MAX_POWER)
  866. return 0;
  867. /*
  868. * Connection status might have changed while resetting other
  869. * links, enable notification and check SATA_PMP_GSCR_ERROR
  870. * before returning.
  871. */
  872. /* enable notification */
  873. if (pmp_dev->flags & ATA_DFLAG_AN) {
  874. gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
  875. err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
  876. gscr[SATA_PMP_GSCR_FEAT_EN]);
  877. if (err_mask) {
  878. ata_dev_err(pmp_dev,
  879. "failed to write PMP_FEAT_EN (Emask=0x%x)\n",
  880. err_mask);
  881. rc = -EIO;
  882. goto pmp_fail;
  883. }
  884. }
  885. /* check GSCR_ERROR */
  886. err_mask = sata_pmp_read(pmp_link, SATA_PMP_GSCR_ERROR, &gscr_error);
  887. if (err_mask) {
  888. ata_dev_err(pmp_dev,
  889. "failed to read PMP_GSCR_ERROR (Emask=0x%x)\n",
  890. err_mask);
  891. rc = -EIO;
  892. goto pmp_fail;
  893. }
  894. cnt = 0;
  895. ata_for_each_link(link, ap, EDGE) {
  896. if (!(gscr_error & (1 << link->pmp)))
  897. continue;
  898. if (sata_pmp_handle_link_fail(link, link_tries)) {
  899. ata_ehi_hotplugged(&link->eh_context.i);
  900. cnt++;
  901. } else {
  902. ata_link_warn(link,
  903. "PHY status changed but maxed out on retries, giving up\n");
  904. ata_link_warn(link,
  905. "Manually issue scan to resume this link\n");
  906. }
  907. }
  908. if (cnt) {
  909. ata_port_info(ap,
  910. "PMP SError.N set for some ports, repeating recovery\n");
  911. goto retry;
  912. }
  913. return 0;
  914. link_fail:
  915. if (sata_pmp_handle_link_fail(link, link_tries)) {
  916. pmp_ehc->i.action |= ATA_EH_RESET;
  917. goto retry;
  918. }
  919. /* fall through */
  920. pmp_fail:
  921. /* Control always ends up here after detaching PMP. Shut up
  922. * and return if we're unloading.
  923. */
  924. if (ap->pflags & ATA_PFLAG_UNLOADING)
  925. return rc;
  926. if (!sata_pmp_attached(ap))
  927. goto retry;
  928. if (--pmp_tries) {
  929. pmp_ehc->i.action |= ATA_EH_RESET;
  930. goto retry;
  931. }
  932. ata_port_err(ap, "failed to recover PMP after %d tries, giving up\n",
  933. ATA_EH_PMP_TRIES);
  934. sata_pmp_detach(pmp_dev);
  935. ata_dev_disable(pmp_dev);
  936. return rc;
  937. }
  938. /**
  939. * sata_pmp_error_handler - do standard error handling for PMP-enabled host
  940. * @ap: host port to handle error for
  941. *
  942. * Perform standard error handling sequence for PMP-enabled host
  943. * @ap.
  944. *
  945. * LOCKING:
  946. * Kernel thread context (may sleep).
  947. */
  948. void sata_pmp_error_handler(struct ata_port *ap)
  949. {
  950. ata_eh_autopsy(ap);
  951. ata_eh_report(ap);
  952. sata_pmp_eh_recover(ap);
  953. ata_eh_finish(ap);
  954. }
  955. EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
  956. EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
  957. EXPORT_SYMBOL_GPL(sata_pmp_error_handler);