123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167 |
- /*
- * For License see notice in hfc_multi.c
- *
- * special IO and init functions for the embedded XHFC board
- * from Speech Design
- *
- */
- #include <asm/8xx_immap.h>
- /* Change this to the value used by your board */
- #ifndef IMAP_ADDR
- #define IMAP_ADDR 0xFFF00000
- #endif
- static void
- #ifdef HFC_REGISTER_DEBUG
- HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
- const char *function, int line)
- #else
- HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
- #endif
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- writeb(reg, hc->xhfc_memaddr);
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- writeb(val, hc->xhfc_memdata);
- }
- static u_char
- #ifdef HFC_REGISTER_DEBUG
- HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
- #else
- HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
- #endif
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- writeb(reg, hc->xhfc_memaddr);
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- return readb(hc->xhfc_memdata);
- }
- static u_short
- #ifdef HFC_REGISTER_DEBUG
- HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
- #else
- HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
- #endif
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- writeb(reg, hc->xhfc_memaddr);
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- return readb(hc->xhfc_memdata);
- }
- static void
- #ifdef HFC_REGISTER_DEBUG
- HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
- #else
- HFC_wait_embsd(struct hfc_multi *hc)
- #endif
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- writeb(R_STATUS, hc->xhfc_memaddr);
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- while (readb(hc->xhfc_memdata) & V_BUSY)
- cpu_relax();
- }
- /* write fifo data (EMBSD) */
- void
- write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- *hc->xhfc_memaddr = A_FIFO_DATA0;
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- while (len) {
- *hc->xhfc_memdata = *data;
- data++;
- len--;
- }
- }
- /* read fifo data (EMBSD) */
- void
- read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
- {
- hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
- *hc->xhfc_memaddr = A_FIFO_DATA0;
- hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
- while (len) {
- *data = (u_char)(*hc->xhfc_memdata);
- data++;
- len--;
- }
- }
- static int
- setup_embedded(struct hfc_multi *hc, struct hm_map *m)
- {
- printk(KERN_INFO
- "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
- m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
- hc->pci_dev = NULL;
- if (m->clock2)
- test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
- hc->leds = m->leds;
- hc->ledstate = 0xAFFEAFFE;
- hc->opticalsupport = m->opticalsupport;
- hc->pci_iobase = 0;
- hc->pci_membase = 0;
- hc->xhfc_membase = NULL;
- hc->xhfc_memaddr = NULL;
- hc->xhfc_memdata = NULL;
- /* set memory access methods */
- if (m->io_mode) /* use mode from card config */
- hc->io_mode = m->io_mode;
- switch (hc->io_mode) {
- case HFC_IO_MODE_EMBSD:
- test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
- hc->slots = 128; /* required */
- /* fall through */
- hc->HFC_outb = HFC_outb_embsd;
- hc->HFC_inb = HFC_inb_embsd;
- hc->HFC_inw = HFC_inw_embsd;
- hc->HFC_wait = HFC_wait_embsd;
- hc->read_fifo = read_fifo_embsd;
- hc->write_fifo = write_fifo_embsd;
- hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
- hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
- XHFC_MEMSIZE);
- if (!hc->xhfc_membase) {
- printk(KERN_WARNING
- "HFC-multi: failed to remap xhfc address space. "
- "(internal error)\n");
- return -EIO;
- }
- hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
- hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
- printk(KERN_INFO
- "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
- "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
- (u_long)hc->xhfc_membase, hc->xhfc_origmembase,
- (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
- break;
- default:
- printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
- return -EIO;
- }
- /* Prepare the MPC8XX PortA 10 as output (address/data selector) */
- hc->immap = (struct immap *)(IMAP_ADDR);
- hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
- hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
- hc->immap->im_ioport.iop_padir |= PA_XHFC_A0;
- /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
- hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
- hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
- hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
- hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
- /* At this point the needed config is done */
- /* fifos are still not enabled */
- return 0;
- }
|