smiapp-quirk.c 7.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
  1. /*
  2. * drivers/media/i2c/smiapp/smiapp-quirk.c
  3. *
  4. * Generic driver for SMIA/SMIA++ compliant camera modules
  5. *
  6. * Copyright (C) 2011--2012 Nokia Corporation
  7. * Contact: Sakari Ailus <sakari.ailus@iki.fi>
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License
  11. * version 2 as published by the Free Software Foundation.
  12. *
  13. * This program is distributed in the hope that it will be useful, but
  14. * WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  16. * General Public License for more details.
  17. */
  18. #include <linux/delay.h>
  19. #include "smiapp.h"
  20. static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
  21. {
  22. return smiapp_write(sensor, SMIAPP_REG_MK_U8(reg), val);
  23. }
  24. static int smiapp_write_8s(struct smiapp_sensor *sensor,
  25. struct smiapp_reg_8 *regs, int len)
  26. {
  27. struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
  28. int rval;
  29. for (; len > 0; len--, regs++) {
  30. rval = smiapp_write_8(sensor, regs->reg, regs->val);
  31. if (rval < 0) {
  32. dev_err(&client->dev,
  33. "error %d writing reg 0x%4.4x, val 0x%2.2x",
  34. rval, regs->reg, regs->val);
  35. return rval;
  36. }
  37. }
  38. return 0;
  39. }
  40. void smiapp_replace_limit(struct smiapp_sensor *sensor,
  41. u32 limit, u32 val)
  42. {
  43. struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
  44. dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
  45. smiapp_reg_limits[limit].addr,
  46. smiapp_reg_limits[limit].what, val, val);
  47. sensor->limits[limit] = val;
  48. }
  49. static int jt8ew9_limits(struct smiapp_sensor *sensor)
  50. {
  51. if (sensor->minfo.revision_number_major < 0x03)
  52. sensor->frame_skip = 1;
  53. /* Below 24 gain doesn't have effect at all, */
  54. /* but ~59 is needed for full dynamic range */
  55. smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
  56. smiapp_replace_limit(
  57. sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
  58. return 0;
  59. }
  60. static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
  61. {
  62. struct smiapp_reg_8 regs[] = {
  63. { 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
  64. { 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
  65. { 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
  66. { 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
  67. { 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
  68. { 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
  69. { 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
  70. { 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
  71. { 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
  72. { 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
  73. { 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
  74. { 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
  75. { 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
  76. { 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  77. { 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  78. { 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  79. { 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  80. { 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  81. { 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
  82. { 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
  83. { 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
  84. { 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
  85. { 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
  86. /* Taken from v03. No idea what the rest are. */
  87. { 0x32e0, 0x05 },
  88. { 0x32e1, 0x05 },
  89. { 0x32e2, 0x04 },
  90. { 0x32e5, 0x04 },
  91. { 0x32e6, 0x04 },
  92. };
  93. return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
  94. }
  95. const struct smiapp_quirk smiapp_jt8ew9_quirk = {
  96. .limits = jt8ew9_limits,
  97. .post_poweron = jt8ew9_post_poweron,
  98. };
  99. static int imx125es_post_poweron(struct smiapp_sensor *sensor)
  100. {
  101. /* Taken from v02. No idea what the other two are. */
  102. struct smiapp_reg_8 regs[] = {
  103. /*
  104. * 0x3302: clk during frame blanking:
  105. * 0x00 - HS mode, 0x01 - LP11
  106. */
  107. { 0x3302, 0x01 },
  108. { 0x302d, 0x00 },
  109. { 0x3b08, 0x8c },
  110. };
  111. return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
  112. }
  113. const struct smiapp_quirk smiapp_imx125es_quirk = {
  114. .post_poweron = imx125es_post_poweron,
  115. };
  116. static int jt8ev1_limits(struct smiapp_sensor *sensor)
  117. {
  118. smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
  119. smiapp_replace_limit(sensor,
  120. SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
  121. return 0;
  122. }
  123. static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
  124. {
  125. struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
  126. int rval;
  127. struct smiapp_reg_8 regs[] = {
  128. { 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
  129. { 0x30a3, 0xd0 }, /* FLASH STROBE enable */
  130. { 0x3237, 0x00 }, /* For control of pulse timing for ADC */
  131. { 0x3238, 0x43 },
  132. { 0x3301, 0x06 }, /* For analog bias for sensor */
  133. { 0x3302, 0x06 },
  134. { 0x3304, 0x00 },
  135. { 0x3305, 0x88 },
  136. { 0x332a, 0x14 },
  137. { 0x332c, 0x6b },
  138. { 0x3336, 0x01 },
  139. { 0x333f, 0x1f },
  140. { 0x3355, 0x00 },
  141. { 0x3356, 0x20 },
  142. { 0x33bf, 0x20 }, /* Adjust the FBC speed */
  143. { 0x33c9, 0x20 },
  144. { 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
  145. { 0x33cf, 0xec }, /* For Black sun */
  146. { 0x3328, 0x80 }, /* Ugh. No idea what's this. */
  147. };
  148. struct smiapp_reg_8 regs_96[] = {
  149. { 0x30ae, 0x00 }, /* For control of ADC clock */
  150. { 0x30af, 0xd0 },
  151. { 0x30b0, 0x01 },
  152. };
  153. rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
  154. if (rval < 0)
  155. return rval;
  156. switch (sensor->platform_data->ext_clk) {
  157. case 9600000:
  158. return smiapp_write_8s(sensor, regs_96,
  159. ARRAY_SIZE(regs_96));
  160. default:
  161. dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
  162. sensor->platform_data->ext_clk);
  163. return 0;
  164. }
  165. }
  166. static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
  167. {
  168. return smiapp_write_8(sensor, 0x3328, 0x00);
  169. }
  170. static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
  171. {
  172. int rval;
  173. /* Workaround: allows fast standby to work properly */
  174. rval = smiapp_write_8(sensor, 0x3205, 0x04);
  175. if (rval < 0)
  176. return rval;
  177. /* Wait for 1 ms + one line => 2 ms is likely enough */
  178. usleep_range(2000, 2000);
  179. /* Restore it */
  180. rval = smiapp_write_8(sensor, 0x3205, 0x00);
  181. if (rval < 0)
  182. return rval;
  183. return smiapp_write_8(sensor, 0x3328, 0x80);
  184. }
  185. static int jt8ev1_init(struct smiapp_sensor *sensor)
  186. {
  187. sensor->pll.flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
  188. return 0;
  189. }
  190. const struct smiapp_quirk smiapp_jt8ev1_quirk = {
  191. .limits = jt8ev1_limits,
  192. .post_poweron = jt8ev1_post_poweron,
  193. .pre_streamon = jt8ev1_pre_streamon,
  194. .post_streamoff = jt8ev1_post_streamoff,
  195. .init = jt8ev1_init,
  196. };
  197. static int tcm8500md_limits(struct smiapp_sensor *sensor)
  198. {
  199. smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
  200. return 0;
  201. }
  202. const struct smiapp_quirk smiapp_tcm8500md_quirk = {
  203. .limits = tcm8500md_limits,
  204. };