123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188 |
- /*
- * Driver for the s5k83a sensor
- *
- * Copyright (C) 2008 Erik Andrén
- * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
- * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
- *
- * Portions of code to USB interface and ALi driver software,
- * Copyright (c) 2006 Willem Duinker
- * v4l2 interface modeled after the V4L2 driver
- * for SN9C10x PC Camera Controllers
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- */
- #ifndef M5602_S5K83A_H_
- #define M5602_S5K83A_H_
- #include "m5602_sensor.h"
- #define S5K83A_FLIP 0x01
- #define S5K83A_HFLIP_TUNE 0x03
- #define S5K83A_VFLIP_TUNE 0x05
- #define S5K83A_BRIGHTNESS 0x0a
- #define S5K83A_EXPOSURE 0x18
- #define S5K83A_GAIN 0x1b
- #define S5K83A_PAGE_MAP 0xec
- #define S5K83A_DEFAULT_GAIN 0x71
- #define S5K83A_DEFAULT_BRIGHTNESS 0x7e
- #define S5K83A_DEFAULT_EXPOSURE 0x00
- #define S5K83A_MAXIMUM_EXPOSURE 0x3c
- #define S5K83A_FLIP_MASK 0x10
- #define S5K83A_GPIO_LED_MASK 0x10
- #define S5K83A_GPIO_ROTATION_MASK 0x40
- /*****************************************************************************/
- /* Kernel module parameters */
- extern int force_sensor;
- extern bool dump_sensor;
- int s5k83a_probe(struct sd *sd);
- int s5k83a_init(struct sd *sd);
- int s5k83a_init_controls(struct sd *sd);
- int s5k83a_start(struct sd *sd);
- int s5k83a_stop(struct sd *sd);
- void s5k83a_disconnect(struct sd *sd);
- static const struct m5602_sensor s5k83a = {
- .name = "S5K83A",
- .probe = s5k83a_probe,
- .init = s5k83a_init,
- .init_controls = s5k83a_init_controls,
- .start = s5k83a_start,
- .stop = s5k83a_stop,
- .disconnect = s5k83a_disconnect,
- .i2c_slave_id = 0x5a,
- .i2c_regW = 2,
- };
- static const unsigned char preinit_s5k83a[][4] = {
- {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
- {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
- {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00},
- {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00},
- {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
- {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
- {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
- {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
- {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
- };
- /* This could probably be considerably shortened.
- I don't have the hardware to experiment with it, patches welcome
- */
- static const unsigned char init_s5k83a[][4] = {
- /* The following sequence is useless after a clean boot
- but is necessary after resume from suspend */
- {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
- {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
- {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
- {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
- {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
- {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
- {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
- {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
- {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00},
- {SENSOR, 0xaf, 0x01, 0x00},
- {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00},
- {SENSOR, 0x7b, 0xff, 0x00},
- {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
- {SENSOR, 0x01, 0x50, 0x00},
- {SENSOR, 0x12, 0x20, 0x00},
- {SENSOR, 0x17, 0x40, 0x00},
- {SENSOR, 0x1c, 0x00, 0x00},
- {SENSOR, 0x02, 0x70, 0x00},
- {SENSOR, 0x03, 0x0b, 0x00},
- {SENSOR, 0x04, 0xf0, 0x00},
- {SENSOR, 0x05, 0x0b, 0x00},
- {SENSOR, 0x06, 0x71, 0x00},
- {SENSOR, 0x07, 0xe8, 0x00}, /* 488 */
- {SENSOR, 0x08, 0x02, 0x00},
- {SENSOR, 0x09, 0x88, 0x00}, /* 648 */
- {SENSOR, 0x14, 0x00, 0x00},
- {SENSOR, 0x15, 0x20, 0x00}, /* 32 */
- {SENSOR, 0x19, 0x00, 0x00},
- {SENSOR, 0x1a, 0x98, 0x00}, /* 152 */
- {SENSOR, 0x0f, 0x02, 0x00},
- {SENSOR, 0x10, 0xe5, 0x00}, /* 741 */
- /* normal colors
- (this is value after boot, but after tries can be different) */
- {SENSOR, 0x00, 0x06, 0x00},
- };
- static const unsigned char start_s5k83a[][4] = {
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
- {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
- {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
- {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
- {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
- {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, /* 484 */
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
- {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
- {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
- {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
- {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, /* 639 */
- {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
- {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
- };
- #endif
|