se401.h 2.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990
  1. /*
  2. * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
  3. *
  4. * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
  5. *
  6. * Based on the v4l1 se401 driver which is:
  7. *
  8. * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of the GNU General Public License as published by
  12. * the Free Software Foundation; either version 2 of the License, or
  13. * (at your option) any later version.
  14. *
  15. * This program is distributed in the hope that it will be useful,
  16. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18. * GNU General Public License for more details.
  19. *
  20. * You should have received a copy of the GNU General Public License
  21. * along with this program; if not, write to the Free Software
  22. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  23. *
  24. */
  25. #define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06
  26. #define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41
  27. #define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42
  28. #define SE401_REQ_CAPTURE_FRAME 0x43
  29. #define SE401_REQ_GET_BRT 0x44
  30. #define SE401_REQ_SET_BRT 0x45
  31. #define SE401_REQ_GET_WIDTH 0x4c
  32. #define SE401_REQ_SET_WIDTH 0x4d
  33. #define SE401_REQ_GET_HEIGHT 0x4e
  34. #define SE401_REQ_SET_HEIGHT 0x4f
  35. #define SE401_REQ_GET_OUTPUT_MODE 0x50
  36. #define SE401_REQ_SET_OUTPUT_MODE 0x51
  37. #define SE401_REQ_GET_EXT_FEATURE 0x52
  38. #define SE401_REQ_SET_EXT_FEATURE 0x53
  39. #define SE401_REQ_CAMERA_POWER 0x56
  40. #define SE401_REQ_LED_CONTROL 0x57
  41. #define SE401_REQ_BIOS 0xff
  42. #define SE401_BIOS_READ 0x07
  43. #define SE401_FORMAT_BAYER 0x40
  44. /* Hyundai hv7131b registers
  45. 7121 and 7141 should be the same (haven't really checked...) */
  46. /* Mode registers: */
  47. #define HV7131_REG_MODE_A 0x00
  48. #define HV7131_REG_MODE_B 0x01
  49. #define HV7131_REG_MODE_C 0x02
  50. /* Frame registers: */
  51. #define HV7131_REG_FRSU 0x10
  52. #define HV7131_REG_FRSL 0x11
  53. #define HV7131_REG_FCSU 0x12
  54. #define HV7131_REG_FCSL 0x13
  55. #define HV7131_REG_FWHU 0x14
  56. #define HV7131_REG_FWHL 0x15
  57. #define HV7131_REG_FWWU 0x16
  58. #define HV7131_REG_FWWL 0x17
  59. /* Timing registers: */
  60. #define HV7131_REG_THBU 0x20
  61. #define HV7131_REG_THBL 0x21
  62. #define HV7131_REG_TVBU 0x22
  63. #define HV7131_REG_TVBL 0x23
  64. #define HV7131_REG_TITU 0x25
  65. #define HV7131_REG_TITM 0x26
  66. #define HV7131_REG_TITL 0x27
  67. #define HV7131_REG_TMCD 0x28
  68. /* Adjust Registers: */
  69. #define HV7131_REG_ARLV 0x30
  70. #define HV7131_REG_ARCG 0x31
  71. #define HV7131_REG_AGCG 0x32
  72. #define HV7131_REG_ABCG 0x33
  73. #define HV7131_REG_APBV 0x34
  74. #define HV7131_REG_ASLP 0x54
  75. /* Offset Registers: */
  76. #define HV7131_REG_OFSR 0x50
  77. #define HV7131_REG_OFSG 0x51
  78. #define HV7131_REG_OFSB 0x52
  79. /* REset level statistics registers: */
  80. #define HV7131_REG_LOREFNOH 0x57
  81. #define HV7131_REG_LOREFNOL 0x58
  82. #define HV7131_REG_HIREFNOH 0x59
  83. #define HV7131_REG_HIREFNOL 0x5a
  84. /* se401 registers */
  85. #define SE401_OPERATINGMODE 0x2000