123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260 |
- /*
- * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
- #include <linux/delay.h>
- #include <linux/jiffies.h>
- #include <linux/list.h>
- #include <linux/module.h>
- #include <linux/netdevice.h>
- #include <linux/phy.h>
- #include <net/dsa.h>
- #include "mv88e6060.h"
- static int reg_read(struct dsa_switch *ds, int addr, int reg)
- {
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- if (bus == NULL)
- return -EINVAL;
- return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
- }
- #define REG_READ(addr, reg) \
- ({ \
- int __ret; \
- \
- __ret = reg_read(ds, addr, reg); \
- if (__ret < 0) \
- return __ret; \
- __ret; \
- })
- static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
- {
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- if (bus == NULL)
- return -EINVAL;
- return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
- }
- #define REG_WRITE(addr, reg, val) \
- ({ \
- int __ret; \
- \
- __ret = reg_write(ds, addr, reg, val); \
- if (__ret < 0) \
- return __ret; \
- })
- static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
- {
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
- int ret;
- if (bus == NULL)
- return NULL;
- ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
- if (ret >= 0) {
- if (ret == PORT_SWITCH_ID_6060)
- return "Marvell 88E6060 (A0)";
- if (ret == PORT_SWITCH_ID_6060_R1 ||
- ret == PORT_SWITCH_ID_6060_R2)
- return "Marvell 88E6060 (B0)";
- if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
- return "Marvell 88E6060";
- }
- return NULL;
- }
- static int mv88e6060_switch_reset(struct dsa_switch *ds)
- {
- int i;
- int ret;
- unsigned long timeout;
- /* Set all ports to the disabled state. */
- for (i = 0; i < MV88E6060_PORTS; i++) {
- ret = REG_READ(REG_PORT(i), PORT_CONTROL);
- REG_WRITE(REG_PORT(i), PORT_CONTROL,
- ret & ~PORT_CONTROL_STATE_MASK);
- }
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
- /* Reset the switch. */
- REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
- GLOBAL_ATU_CONTROL_SWRESET |
- GLOBAL_ATU_CONTROL_LEARNDIS);
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
- if (ret & GLOBAL_STATUS_INIT_READY)
- break;
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- return 0;
- }
- static int mv88e6060_setup_global(struct dsa_switch *ds)
- {
- /* Disable discarding of frames with excessive collisions,
- * set the maximum frame size to 1536 bytes, and mask all
- * interrupt sources.
- */
- REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
- /* Disable automatic address learning.
- */
- REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
- GLOBAL_ATU_CONTROL_LEARNDIS);
- return 0;
- }
- static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
- {
- int addr = REG_PORT(p);
- /* Do not force flow control, disable Ingress and Egress
- * Header tagging, disable VLAN tunneling, and set the port
- * state to Forwarding. Additionally, if this is the CPU
- * port, enable Ingress and Egress Trailer tagging mode.
- */
- REG_WRITE(addr, PORT_CONTROL,
- dsa_is_cpu_port(ds, p) ?
- PORT_CONTROL_TRAILER |
- PORT_CONTROL_INGRESS_MODE |
- PORT_CONTROL_STATE_FORWARDING :
- PORT_CONTROL_STATE_FORWARDING);
- /* Port based VLAN map: give each port its own address
- * database, allow the CPU port to talk to each of the 'real'
- * ports, and allow each of the 'real' ports to only talk to
- * the CPU port.
- */
- REG_WRITE(addr, PORT_VLAN_MAP,
- ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
- (dsa_is_cpu_port(ds, p) ?
- ds->phys_port_mask :
- BIT(ds->dst->cpu_port)));
- /* Port Association Vector: when learning source addresses
- * of packets, add the address to the address database using
- * a port bitmap that has only the bit for this port set and
- * the other bits clear.
- */
- REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
- return 0;
- }
- static int mv88e6060_setup(struct dsa_switch *ds)
- {
- int i;
- int ret;
- ret = mv88e6060_switch_reset(ds);
- if (ret < 0)
- return ret;
- /* @@@ initialise atu */
- ret = mv88e6060_setup_global(ds);
- if (ret < 0)
- return ret;
- for (i = 0; i < MV88E6060_PORTS; i++) {
- ret = mv88e6060_setup_port(ds, i);
- if (ret < 0)
- return ret;
- }
- return 0;
- }
- static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
- {
- /* Use the same MAC Address as FD Pause frames for all ports */
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
- return 0;
- }
- static int mv88e6060_port_to_phy_addr(int port)
- {
- if (port >= 0 && port < MV88E6060_PORTS)
- return port;
- return -1;
- }
- static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
- {
- int addr;
- addr = mv88e6060_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
- return reg_read(ds, addr, regnum);
- }
- static int
- mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
- {
- int addr;
- addr = mv88e6060_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
- return reg_write(ds, addr, regnum, val);
- }
- static struct dsa_switch_driver mv88e6060_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_TRAILER,
- .probe = mv88e6060_probe,
- .setup = mv88e6060_setup,
- .set_addr = mv88e6060_set_addr,
- .phy_read = mv88e6060_phy_read,
- .phy_write = mv88e6060_phy_write,
- };
- static int __init mv88e6060_init(void)
- {
- register_switch_driver(&mv88e6060_switch_driver);
- return 0;
- }
- module_init(mv88e6060_init);
- static void __exit mv88e6060_cleanup(void)
- {
- unregister_switch_driver(&mv88e6060_switch_driver);
- }
- module_exit(mv88e6060_cleanup);
- MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
- MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
- MODULE_LICENSE("GPL");
- MODULE_ALIAS("platform:mv88e6060");
|