defs.h 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394
  1. /*
  2. * This header file contains global constant/enum definitions,
  3. * global variable declaration.
  4. */
  5. #ifndef _LBS_DEFS_H_
  6. #define _LBS_DEFS_H_
  7. #include <linux/spinlock.h>
  8. #ifdef CONFIG_LIBERTAS_DEBUG
  9. #define DEBUG
  10. #define PROC_DEBUG
  11. #endif
  12. #ifndef DRV_NAME
  13. #define DRV_NAME "libertas"
  14. #endif
  15. #define LBS_DEB_ENTER 0x00000001
  16. #define LBS_DEB_LEAVE 0x00000002
  17. #define LBS_DEB_MAIN 0x00000004
  18. #define LBS_DEB_NET 0x00000008
  19. #define LBS_DEB_MESH 0x00000010
  20. #define LBS_DEB_WEXT 0x00000020
  21. #define LBS_DEB_IOCTL 0x00000040
  22. #define LBS_DEB_SCAN 0x00000080
  23. #define LBS_DEB_ASSOC 0x00000100
  24. #define LBS_DEB_JOIN 0x00000200
  25. #define LBS_DEB_11D 0x00000400
  26. #define LBS_DEB_DEBUGFS 0x00000800
  27. #define LBS_DEB_ETHTOOL 0x00001000
  28. #define LBS_DEB_HOST 0x00002000
  29. #define LBS_DEB_CMD 0x00004000
  30. #define LBS_DEB_RX 0x00008000
  31. #define LBS_DEB_TX 0x00010000
  32. #define LBS_DEB_USB 0x00020000
  33. #define LBS_DEB_CS 0x00040000
  34. #define LBS_DEB_FW 0x00080000
  35. #define LBS_DEB_THREAD 0x00100000
  36. #define LBS_DEB_HEX 0x00200000
  37. #define LBS_DEB_SDIO 0x00400000
  38. #define LBS_DEB_SYSFS 0x00800000
  39. #define LBS_DEB_SPI 0x01000000
  40. #define LBS_DEB_CFG80211 0x02000000
  41. extern unsigned int lbs_debug;
  42. #ifdef DEBUG
  43. #define LBS_DEB_LL(grp, grpnam, fmt, args...) \
  44. do { if ((lbs_debug & (grp)) == (grp)) \
  45. printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
  46. in_interrupt() ? " (INT)" : "", ## args); } while (0)
  47. #else
  48. #define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
  49. #endif
  50. #define lbs_deb_enter(grp) \
  51. LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
  52. #define lbs_deb_enter_args(grp, fmt, args...) \
  53. LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
  54. #define lbs_deb_leave(grp) \
  55. LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
  56. #define lbs_deb_leave_args(grp, fmt, args...) \
  57. LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
  58. __func__, ##args);
  59. #define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
  60. #define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
  61. #define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
  62. #define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
  63. #define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
  64. #define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
  65. #define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
  66. #define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
  67. #define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
  68. #define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
  69. #define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
  70. #define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
  71. #define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
  72. #define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
  73. #define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
  74. #define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
  75. #define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
  76. #define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
  77. #define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
  78. #define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
  79. #define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
  80. #define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
  81. #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
  82. #define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
  83. #ifdef DEBUG
  84. static inline void lbs_deb_hex(unsigned int grp, const char *prompt,
  85. const u8 *buf, int len)
  86. {
  87. int i = 0;
  88. if (len &&
  89. (lbs_debug & LBS_DEB_HEX) &&
  90. (lbs_debug & grp))
  91. {
  92. for (i = 1; i <= len; i++) {
  93. if ((i & 0xf) == 1) {
  94. if (i != 1)
  95. printk("\n");
  96. printk(DRV_NAME " %s: ", prompt);
  97. }
  98. printk("%02x ", (u8) * buf);
  99. buf++;
  100. }
  101. printk("\n");
  102. }
  103. }
  104. #else
  105. #define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
  106. #endif
  107. /* Buffer Constants */
  108. /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
  109. * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
  110. * driver has more local TxPDs. Each TxPD on the host memory is associated
  111. * with a Tx control node. The driver maintains 8 RxPD descriptors for
  112. * station firmware to store Rx packet information.
  113. *
  114. * Current version of MAC has a 32x6 multicast address buffer.
  115. *
  116. * 802.11b can have up to 14 channels, the driver keeps the
  117. * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
  118. */
  119. #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
  120. #define LBS_NUM_CMD_BUFFERS 10
  121. #define LBS_CMD_BUFFER_SIZE (2 * 1024)
  122. #define MRVDRV_MAX_CHANNEL_SIZE 14
  123. #define MRVDRV_ASSOCIATION_TIME_OUT 255
  124. #define MRVDRV_SNAP_HEADER_LEN 8
  125. #define LBS_UPLD_SIZE 2312
  126. #define DEV_NAME_LEN 32
  127. /* Wake criteria for HOST_SLEEP_CFG command */
  128. #define EHS_WAKE_ON_BROADCAST_DATA 0x0001
  129. #define EHS_WAKE_ON_UNICAST_DATA 0x0002
  130. #define EHS_WAKE_ON_MAC_EVENT 0x0004
  131. #define EHS_WAKE_ON_MULTICAST_DATA 0x0008
  132. #define EHS_REMOVE_WAKEUP 0xFFFFFFFF
  133. /* Wake rules for Host_Sleep_CFG command */
  134. #define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
  135. #define WOL_RULE_NET_TYPE_MESH 0x10
  136. #define WOL_RULE_ADDR_TYPE_BCAST 0x01
  137. #define WOL_RULE_ADDR_TYPE_MCAST 0x08
  138. #define WOL_RULE_ADDR_TYPE_UCAST 0x02
  139. #define WOL_RULE_OP_AND 0x01
  140. #define WOL_RULE_OP_OR 0x02
  141. #define WOL_RULE_OP_INVALID 0xFF
  142. #define WOL_RESULT_VALID_CMD 0
  143. #define WOL_RESULT_NOSPC_ERR 1
  144. #define WOL_RESULT_EEXIST_ERR 2
  145. /* Misc constants */
  146. /* This section defines 802.11 specific contants */
  147. #define MRVDRV_MAX_BSS_DESCRIPTS 16
  148. #define MRVDRV_MAX_REGION_CODE 6
  149. #define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
  150. #define MRVDRV_CHANNELS_PER_SCAN 4
  151. #define MRVDRV_MAX_CHANNELS_PER_SCAN 14
  152. #define MRVDRV_MIN_BEACON_INTERVAL 20
  153. #define MRVDRV_MAX_BEACON_INTERVAL 1000
  154. #define MRVDRV_BEACON_INTERVAL 100
  155. #define MARVELL_MESH_IE_LENGTH 9
  156. /*
  157. * Values used to populate the struct mrvl_mesh_ie. The only time you need this
  158. * is when enabling the mesh using CMD_MESH_CONFIG.
  159. */
  160. #define MARVELL_MESH_IE_TYPE 4
  161. #define MARVELL_MESH_IE_SUBTYPE 0
  162. #define MARVELL_MESH_IE_VERSION 0
  163. #define MARVELL_MESH_PROTO_ID_HWMP 0
  164. #define MARVELL_MESH_METRIC_ID 0
  165. #define MARVELL_MESH_CAPABILITY 0
  166. /* INT status Bit Definition */
  167. #define MRVDRV_TX_DNLD_RDY 0x0001
  168. #define MRVDRV_RX_UPLD_RDY 0x0002
  169. #define MRVDRV_CMD_DNLD_RDY 0x0004
  170. #define MRVDRV_CMD_UPLD_RDY 0x0008
  171. #define MRVDRV_CARDEVENT 0x0010
  172. /* Automatic TX control default levels */
  173. #define POW_ADAPT_DEFAULT_P0 13
  174. #define POW_ADAPT_DEFAULT_P1 15
  175. #define POW_ADAPT_DEFAULT_P2 18
  176. #define TPC_DEFAULT_P0 5
  177. #define TPC_DEFAULT_P1 10
  178. #define TPC_DEFAULT_P2 13
  179. /* TxPD status */
  180. /*
  181. * Station firmware use TxPD status field to report final Tx transmit
  182. * result, Bit masks are used to present combined situations.
  183. */
  184. #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
  185. #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
  186. /* Tx mesh flag */
  187. /*
  188. * Currently we are using normal WDS flag as mesh flag.
  189. * TODO: change to proper mesh flag when MAC understands it.
  190. */
  191. #define TxPD_CONTROL_WDS_FRAME (1<<17)
  192. #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
  193. /* Mesh interface ID */
  194. #define MESH_IFACE_ID 0x0001
  195. /* Mesh id should be in bits 14-13-12 */
  196. #define MESH_IFACE_BIT_OFFSET 0x000c
  197. /* Mesh enable bit in FW capability */
  198. #define MESH_CAPINFO_ENABLE_MASK (1<<16)
  199. /* FW definition from Marvell v4 */
  200. #define MRVL_FW_V4 (0x04)
  201. /* FW definition from Marvell v5 */
  202. #define MRVL_FW_V5 (0x05)
  203. /* FW definition from Marvell v10 */
  204. #define MRVL_FW_V10 (0x0a)
  205. /* FW major revision definition */
  206. #define MRVL_FW_MAJOR_REV(x) ((x)>>24)
  207. /* RxPD status */
  208. #define MRVDRV_RXPD_STATUS_OK 0x0001
  209. /* RxPD status - Received packet types */
  210. /* Rx mesh flag */
  211. /*
  212. * Currently we are using normal WDS flag as mesh flag.
  213. * TODO: change to proper mesh flag when MAC understands it.
  214. */
  215. #define RxPD_CONTROL_WDS_FRAME (0x40)
  216. #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
  217. /* RSSI-related defines */
  218. /*
  219. * RSSI constants are used to implement 802.11 RSSI threshold
  220. * indication. if the Rx packet signal got too weak for 5 consecutive
  221. * times, miniport driver (driver) will report this event to wrapper
  222. */
  223. #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
  224. /* RTS/FRAG related defines */
  225. #define MRVDRV_RTS_MIN_VALUE 0
  226. #define MRVDRV_RTS_MAX_VALUE 2347
  227. #define MRVDRV_FRAG_MIN_VALUE 256
  228. #define MRVDRV_FRAG_MAX_VALUE 2346
  229. /* This is for firmware specific length */
  230. #define EXTRA_LEN 36
  231. #define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
  232. (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
  233. #define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
  234. (ETH_FRAME_LEN + sizeof(struct rxpd) \
  235. + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
  236. #define CMD_F_HOSTCMD (1 << 0)
  237. #define FW_CAPINFO_WPA (1 << 0)
  238. #define FW_CAPINFO_PS (1 << 1)
  239. #define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
  240. #define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
  241. #define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
  242. #define KEY_LEN_WPA_AES 16
  243. #define KEY_LEN_WPA_TKIP 32
  244. #define KEY_LEN_WEP_104 13
  245. #define KEY_LEN_WEP_40 5
  246. #define RF_ANTENNA_1 0x1
  247. #define RF_ANTENNA_2 0x2
  248. #define RF_ANTENNA_AUTO 0xFFFF
  249. #define BAND_B (0x01)
  250. #define BAND_G (0x02)
  251. #define ALL_802_11_BANDS (BAND_B | BAND_G)
  252. #define MAX_RATES 14
  253. #define MAX_LEDS 8
  254. /* Global Variable Declaration */
  255. extern const char lbs_driver_version[];
  256. extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
  257. /* ENUM definition */
  258. /* SNRNF_TYPE */
  259. enum SNRNF_TYPE {
  260. TYPE_BEACON = 0,
  261. TYPE_RXPD,
  262. MAX_TYPE_B
  263. };
  264. /* SNRNF_DATA */
  265. enum SNRNF_DATA {
  266. TYPE_NOAVG = 0,
  267. TYPE_AVG,
  268. MAX_TYPE_AVG
  269. };
  270. /* LBS_802_11_POWER_MODE */
  271. enum LBS_802_11_POWER_MODE {
  272. LBS802_11POWERMODECAM,
  273. LBS802_11POWERMODEMAX_PSP,
  274. LBS802_11POWERMODEFAST_PSP,
  275. /* not a real mode, defined as an upper bound */
  276. LBS802_11POWEMODEMAX
  277. };
  278. /* PS_STATE */
  279. enum PS_STATE {
  280. PS_STATE_FULL_POWER,
  281. PS_STATE_AWAKE,
  282. PS_STATE_PRE_SLEEP,
  283. PS_STATE_SLEEP
  284. };
  285. /* DNLD_STATE */
  286. enum DNLD_STATE {
  287. DNLD_RES_RECEIVED,
  288. DNLD_DATA_SENT,
  289. DNLD_CMD_SENT,
  290. DNLD_BOOTCMD_SENT,
  291. };
  292. /* LBS_MEDIA_STATE */
  293. enum LBS_MEDIA_STATE {
  294. LBS_CONNECTED,
  295. LBS_DISCONNECTED
  296. };
  297. /* LBS_802_11_PRIVACY_FILTER */
  298. enum LBS_802_11_PRIVACY_FILTER {
  299. LBS802_11PRIVFILTERACCEPTALL,
  300. LBS802_11PRIVFILTER8021XWEP
  301. };
  302. /* mv_ms_type */
  303. enum mv_ms_type {
  304. MVMS_DAT = 0,
  305. MVMS_CMD = 1,
  306. MVMS_TXDONE = 2,
  307. MVMS_EVENT
  308. };
  309. /* KEY_TYPE_ID */
  310. enum KEY_TYPE_ID {
  311. KEY_TYPE_ID_WEP = 0,
  312. KEY_TYPE_ID_TKIP,
  313. KEY_TYPE_ID_AES
  314. };
  315. /* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
  316. enum KEY_INFO_WPA {
  317. KEY_INFO_WPA_MCAST = 0x01,
  318. KEY_INFO_WPA_UNICAST = 0x02,
  319. KEY_INFO_WPA_ENABLED = 0x04
  320. };
  321. /* Default values for fwt commands. */
  322. #define FWT_DEFAULT_METRIC 0
  323. #define FWT_DEFAULT_DIR 1
  324. /* Default Rate, 11Mbps */
  325. #define FWT_DEFAULT_RATE 3
  326. #define FWT_DEFAULT_SSN 0xffffffff
  327. #define FWT_DEFAULT_DSN 0
  328. #define FWT_DEFAULT_HOPCOUNT 0
  329. #define FWT_DEFAULT_TTL 0
  330. #define FWT_DEFAULT_EXPIRATION 0
  331. #define FWT_DEFAULT_SLEEPMODE 0
  332. #define FWT_DEFAULT_SNR 0
  333. #endif