123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437 |
- /*
- * Marvell Wireless LAN device driver: AP TX and RX data handling
- *
- * Copyright (C) 2012-2014, Marvell International Ltd.
- *
- * This software file (the "File") is distributed by Marvell International
- * Ltd. under the terms of the GNU General Public License Version 2, June 1991
- * (the "License"). You may use, redistribute and/or modify this File in
- * accordance with the terms and conditions of the License, a copy of which
- * is available by writing to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
- * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
- *
- * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
- * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
- * this warranty disclaimer.
- */
- #include "decl.h"
- #include "ioctl.h"
- #include "main.h"
- #include "wmm.h"
- #include "11n_aggr.h"
- #include "11n_rxreorder.h"
- /* This function checks if particular RA list has packets more than low bridge
- * packet threshold and then deletes packet from this RA list.
- * Function deletes packets from such RA list and returns true. If no such list
- * is found, false is returned.
- */
- static bool
- mwifiex_uap_del_tx_pkts_in_ralist(struct mwifiex_private *priv,
- struct list_head *ra_list_head,
- int tid)
- {
- struct mwifiex_ra_list_tbl *ra_list;
- struct sk_buff *skb, *tmp;
- bool pkt_deleted = false;
- struct mwifiex_txinfo *tx_info;
- struct mwifiex_adapter *adapter = priv->adapter;
- list_for_each_entry(ra_list, ra_list_head, list) {
- if (skb_queue_empty(&ra_list->skb_head))
- continue;
- skb_queue_walk_safe(&ra_list->skb_head, skb, tmp) {
- tx_info = MWIFIEX_SKB_TXCB(skb);
- if (tx_info->flags & MWIFIEX_BUF_FLAG_BRIDGED_PKT) {
- __skb_unlink(skb, &ra_list->skb_head);
- mwifiex_write_data_complete(adapter, skb, 0,
- -1);
- if (ra_list->tx_paused)
- priv->wmm.pkts_paused[tid]--;
- else
- atomic_dec(&priv->wmm.tx_pkts_queued);
- pkt_deleted = true;
- }
- if ((atomic_read(&adapter->pending_bridged_pkts) <=
- MWIFIEX_BRIDGED_PKTS_THR_LOW))
- break;
- }
- }
- return pkt_deleted;
- }
- /* This function deletes packets from particular RA List. RA list index
- * from which packets are deleted is preserved so that packets from next RA
- * list are deleted upon subsequent call thus maintaining fairness.
- */
- static void mwifiex_uap_cleanup_tx_queues(struct mwifiex_private *priv)
- {
- unsigned long flags;
- struct list_head *ra_list;
- int i;
- spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags);
- for (i = 0; i < MAX_NUM_TID; i++, priv->del_list_idx++) {
- if (priv->del_list_idx == MAX_NUM_TID)
- priv->del_list_idx = 0;
- ra_list = &priv->wmm.tid_tbl_ptr[priv->del_list_idx].ra_list;
- if (mwifiex_uap_del_tx_pkts_in_ralist(priv, ra_list, i)) {
- priv->del_list_idx++;
- break;
- }
- }
- spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
- }
- static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
- struct sk_buff *skb)
- {
- struct mwifiex_adapter *adapter = priv->adapter;
- struct uap_rxpd *uap_rx_pd;
- struct rx_packet_hdr *rx_pkt_hdr;
- struct sk_buff *new_skb;
- struct mwifiex_txinfo *tx_info;
- int hdr_chop;
- struct ethhdr *p_ethhdr;
- struct mwifiex_sta_node *src_node;
- uap_rx_pd = (struct uap_rxpd *)(skb->data);
- rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
- if ((atomic_read(&adapter->pending_bridged_pkts) >=
- MWIFIEX_BRIDGED_PKTS_THR_HIGH)) {
- mwifiex_dbg(priv->adapter, ERROR,
- "Tx: Bridge packet limit reached. Drop packet!\n");
- kfree_skb(skb);
- mwifiex_uap_cleanup_tx_queues(priv);
- return;
- }
- if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
- sizeof(bridge_tunnel_header))) ||
- (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
- sizeof(rfc1042_header)) &&
- ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_AARP &&
- ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_IPX)) {
- /* Replace the 803 header and rfc1042 header (llc/snap) with
- * an Ethernet II header, keep the src/dst and snap_type
- * (ethertype).
- *
- * The firmware only passes up SNAP frames converting all RX
- * data from 802.11 to 802.2/LLC/SNAP frames.
- *
- * To create the Ethernet II, just move the src, dst address
- * right before the snap_type.
- */
- p_ethhdr = (struct ethhdr *)
- ((u8 *)(&rx_pkt_hdr->eth803_hdr)
- + sizeof(rx_pkt_hdr->eth803_hdr)
- + sizeof(rx_pkt_hdr->rfc1042_hdr)
- - sizeof(rx_pkt_hdr->eth803_hdr.h_dest)
- - sizeof(rx_pkt_hdr->eth803_hdr.h_source)
- - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type));
- memcpy(p_ethhdr->h_source, rx_pkt_hdr->eth803_hdr.h_source,
- sizeof(p_ethhdr->h_source));
- memcpy(p_ethhdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest,
- sizeof(p_ethhdr->h_dest));
- /* Chop off the rxpd + the excess memory from
- * 802.2/llc/snap header that was removed.
- */
- hdr_chop = (u8 *)p_ethhdr - (u8 *)uap_rx_pd;
- } else {
- /* Chop off the rxpd */
- hdr_chop = (u8 *)&rx_pkt_hdr->eth803_hdr - (u8 *)uap_rx_pd;
- }
- /* Chop off the leading header bytes so that it points
- * to the start of either the reconstructed EthII frame
- * or the 802.2/llc/snap frame.
- */
- skb_pull(skb, hdr_chop);
- if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) {
- mwifiex_dbg(priv->adapter, ERROR,
- "data: Tx: insufficient skb headroom %d\n",
- skb_headroom(skb));
- /* Insufficient skb headroom - allocate a new skb */
- new_skb =
- skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
- if (unlikely(!new_skb)) {
- mwifiex_dbg(priv->adapter, ERROR,
- "Tx: cannot allocate new_skb\n");
- kfree_skb(skb);
- priv->stats.tx_dropped++;
- return;
- }
- kfree_skb(skb);
- skb = new_skb;
- mwifiex_dbg(priv->adapter, INFO,
- "info: new skb headroom %d\n",
- skb_headroom(skb));
- }
- tx_info = MWIFIEX_SKB_TXCB(skb);
- memset(tx_info, 0, sizeof(*tx_info));
- tx_info->bss_num = priv->bss_num;
- tx_info->bss_type = priv->bss_type;
- tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;
- src_node = mwifiex_get_sta_entry(priv, rx_pkt_hdr->eth803_hdr.h_source);
- if (src_node) {
- src_node->stats.last_rx = jiffies;
- src_node->stats.rx_bytes += skb->len;
- src_node->stats.rx_packets++;
- src_node->stats.last_tx_rate = uap_rx_pd->rx_rate;
- src_node->stats.last_tx_htinfo = uap_rx_pd->ht_info;
- }
- if (is_unicast_ether_addr(rx_pkt_hdr->eth803_hdr.h_dest)) {
- /* Update bridge packet statistics as the
- * packet is not going to kernel/upper layer.
- */
- priv->stats.rx_bytes += skb->len;
- priv->stats.rx_packets++;
- /* Sending bridge packet to TX queue, so save the packet
- * length in TXCB to update statistics in TX complete.
- */
- tx_info->pkt_len = skb->len;
- }
- __net_timestamp(skb);
- mwifiex_wmm_add_buf_txqueue(priv, skb);
- atomic_inc(&adapter->tx_pending);
- atomic_inc(&adapter->pending_bridged_pkts);
- return;
- }
- /*
- * This function contains logic for AP packet forwarding.
- *
- * If a packet is multicast/broadcast, it is sent to kernel/upper layer
- * as well as queued back to AP TX queue so that it can be sent to other
- * associated stations.
- * If a packet is unicast and RA is present in associated station list,
- * it is again requeued into AP TX queue.
- * If a packet is unicast and RA is not in associated station list,
- * packet is forwarded to kernel to handle routing logic.
- */
- int mwifiex_handle_uap_rx_forward(struct mwifiex_private *priv,
- struct sk_buff *skb)
- {
- struct mwifiex_adapter *adapter = priv->adapter;
- struct uap_rxpd *uap_rx_pd;
- struct rx_packet_hdr *rx_pkt_hdr;
- u8 ra[ETH_ALEN];
- struct sk_buff *skb_uap;
- uap_rx_pd = (struct uap_rxpd *)(skb->data);
- rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
- /* don't do packet forwarding in disconnected state */
- if (!priv->media_connected) {
- mwifiex_dbg(adapter, ERROR,
- "drop packet in disconnected state.\n");
- dev_kfree_skb_any(skb);
- return 0;
- }
- memcpy(ra, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN);
- if (is_multicast_ether_addr(ra)) {
- skb_uap = skb_copy(skb, GFP_ATOMIC);
- mwifiex_uap_queue_bridged_pkt(priv, skb_uap);
- } else {
- if (mwifiex_get_sta_entry(priv, ra)) {
- /* Requeue Intra-BSS packet */
- mwifiex_uap_queue_bridged_pkt(priv, skb);
- return 0;
- }
- }
- /* Forward unicat/Inter-BSS packets to kernel. */
- return mwifiex_process_rx_packet(priv, skb);
- }
- /*
- * This function processes the packet received on AP interface.
- *
- * The function looks into the RxPD and performs sanity tests on the
- * received buffer to ensure its a valid packet before processing it
- * further. If the packet is determined to be aggregated, it is
- * de-aggregated accordingly. Then skb is passed to AP packet forwarding logic.
- *
- * The completion callback is called after processing is complete.
- */
- int mwifiex_process_uap_rx_packet(struct mwifiex_private *priv,
- struct sk_buff *skb)
- {
- struct mwifiex_adapter *adapter = priv->adapter;
- int ret;
- struct uap_rxpd *uap_rx_pd;
- struct rx_packet_hdr *rx_pkt_hdr;
- u16 rx_pkt_type;
- u8 ta[ETH_ALEN], pkt_type;
- unsigned long flags;
- struct mwifiex_sta_node *node;
- uap_rx_pd = (struct uap_rxpd *)(skb->data);
- rx_pkt_type = le16_to_cpu(uap_rx_pd->rx_pkt_type);
- rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
- ether_addr_copy(ta, rx_pkt_hdr->eth803_hdr.h_source);
- if ((le16_to_cpu(uap_rx_pd->rx_pkt_offset) +
- le16_to_cpu(uap_rx_pd->rx_pkt_length)) > (u16) skb->len) {
- mwifiex_dbg(adapter, ERROR,
- "wrong rx packet: len=%d, offset=%d, length=%d\n",
- skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset),
- le16_to_cpu(uap_rx_pd->rx_pkt_length));
- priv->stats.rx_dropped++;
- node = mwifiex_get_sta_entry(priv, ta);
- if (node)
- node->stats.tx_failed++;
- dev_kfree_skb_any(skb);
- return 0;
- }
- if (rx_pkt_type == PKT_TYPE_MGMT) {
- ret = mwifiex_process_mgmt_packet(priv, skb);
- if (ret)
- mwifiex_dbg(adapter, ERROR,
- "Rx of mgmt packet failed");
- dev_kfree_skb_any(skb);
- return ret;
- }
- if (rx_pkt_type != PKT_TYPE_BAR && uap_rx_pd->priority < MAX_NUM_TID) {
- spin_lock_irqsave(&priv->sta_list_spinlock, flags);
- node = mwifiex_get_sta_entry(priv, ta);
- if (node)
- node->rx_seq[uap_rx_pd->priority] =
- le16_to_cpu(uap_rx_pd->seq_num);
- spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
- }
- if (!priv->ap_11n_enabled ||
- (!mwifiex_11n_get_rx_reorder_tbl(priv, uap_rx_pd->priority, ta) &&
- (le16_to_cpu(uap_rx_pd->rx_pkt_type) != PKT_TYPE_AMSDU))) {
- ret = mwifiex_handle_uap_rx_forward(priv, skb);
- return ret;
- }
- /* Reorder and send to kernel */
- pkt_type = (u8)le16_to_cpu(uap_rx_pd->rx_pkt_type);
- ret = mwifiex_11n_rx_reorder_pkt(priv, le16_to_cpu(uap_rx_pd->seq_num),
- uap_rx_pd->priority, ta, pkt_type,
- skb);
- if (ret || (rx_pkt_type == PKT_TYPE_BAR))
- dev_kfree_skb_any(skb);
- if (ret)
- priv->stats.rx_dropped++;
- return ret;
- }
- /*
- * This function fills the TxPD for AP tx packets.
- *
- * The Tx buffer received by this function should already have the
- * header space allocated for TxPD.
- *
- * This function inserts the TxPD in between interface header and actual
- * data and adjusts the buffer pointers accordingly.
- *
- * The following TxPD fields are set by this function, as required -
- * - BSS number
- * - Tx packet length and offset
- * - Priority
- * - Packet delay
- * - Priority specific Tx control
- * - Flags
- */
- void *mwifiex_process_uap_txpd(struct mwifiex_private *priv,
- struct sk_buff *skb)
- {
- struct mwifiex_adapter *adapter = priv->adapter;
- struct uap_txpd *txpd;
- struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
- int pad;
- u16 pkt_type, pkt_offset;
- int hroom = (priv->adapter->iface_type == MWIFIEX_USB) ? 0 :
- INTF_HEADER_LEN;
- if (!skb->len) {
- mwifiex_dbg(adapter, ERROR,
- "Tx: bad packet length: %d\n", skb->len);
- tx_info->status_code = -1;
- return skb->data;
- }
- BUG_ON(skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN);
- pkt_type = mwifiex_is_skb_mgmt_frame(skb) ? PKT_TYPE_MGMT : 0;
- pad = ((void *)skb->data - (sizeof(*txpd) + hroom) - NULL) &
- (MWIFIEX_DMA_ALIGN_SZ - 1);
- skb_push(skb, sizeof(*txpd) + pad);
- txpd = (struct uap_txpd *)skb->data;
- memset(txpd, 0, sizeof(*txpd));
- txpd->bss_num = priv->bss_num;
- txpd->bss_type = priv->bss_type;
- txpd->tx_pkt_length = cpu_to_le16((u16)(skb->len - (sizeof(*txpd) +
- pad)));
- txpd->priority = (u8)skb->priority;
- txpd->pkt_delay_2ms = mwifiex_wmm_compute_drv_pkt_delay(priv, skb);
- if (tx_info->flags & MWIFIEX_BUF_FLAG_EAPOL_TX_STATUS ||
- tx_info->flags & MWIFIEX_BUF_FLAG_ACTION_TX_STATUS) {
- txpd->tx_token_id = tx_info->ack_frame_id;
- txpd->flags |= MWIFIEX_TXPD_FLAGS_REQ_TX_STATUS;
- }
- if (txpd->priority < ARRAY_SIZE(priv->wmm.user_pri_pkt_tx_ctrl))
- /*
- * Set the priority specific tx_control field, setting of 0 will
- * cause the default value to be used later in this function.
- */
- txpd->tx_control =
- cpu_to_le32(priv->wmm.user_pri_pkt_tx_ctrl[txpd->priority]);
- /* Offset of actual data */
- pkt_offset = sizeof(*txpd) + pad;
- if (pkt_type == PKT_TYPE_MGMT) {
- /* Set the packet type and add header for management frame */
- txpd->tx_pkt_type = cpu_to_le16(pkt_type);
- pkt_offset += MWIFIEX_MGMT_FRAME_HEADER_SIZE;
- }
- txpd->tx_pkt_offset = cpu_to_le16(pkt_offset);
- /* make space for INTF_HEADER_LEN */
- skb_push(skb, hroom);
- if (!txpd->tx_control)
- /* TxCtrl set by user or default */
- txpd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
- return skb->data;
- }
|