Kconfig 2.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. config P54_COMMON
  2. tristate "Softmac Prism54 support"
  3. depends on MAC80211
  4. select FW_LOADER
  5. select CRC_CCITT
  6. ---help---
  7. This is common code for isl38xx/stlc45xx based modules.
  8. This module does nothing by itself - the USB/PCI/SPI front-ends
  9. also need to be enabled in order to support any devices.
  10. These devices require softmac firmware which can be found at
  11. <http://wireless.kernel.org/en/users/Drivers/p54>
  12. If you choose to build a module, it'll be called p54common.
  13. config P54_USB
  14. tristate "Prism54 USB support"
  15. depends on P54_COMMON && USB
  16. select CRC32
  17. ---help---
  18. This driver is for USB isl38xx based wireless cards.
  19. These devices require softmac firmware which can be found at
  20. <http://wireless.kernel.org/en/users/Drivers/p54>
  21. If you choose to build a module, it'll be called p54usb.
  22. config P54_PCI
  23. tristate "Prism54 PCI support"
  24. depends on P54_COMMON && PCI
  25. ---help---
  26. This driver is for PCI isl38xx based wireless cards.
  27. This driver supports most devices that are supported by the
  28. fullmac prism54 driver plus many devices which are not
  29. supported by the fullmac driver/firmware.
  30. This driver requires softmac firmware which can be found at
  31. <http://wireless.kernel.org/en/users/Drivers/p54>
  32. If you choose to build a module, it'll be called p54pci.
  33. config P54_SPI
  34. tristate "Prism54 SPI (stlc45xx) support"
  35. depends on P54_COMMON && SPI_MASTER
  36. ---help---
  37. This driver is for stlc4550 or stlc4560 based wireless chips
  38. such as Nokia's N800/N810 Portable Internet Tablet.
  39. If you choose to build a module, it'll be called p54spi.
  40. config P54_SPI_DEFAULT_EEPROM
  41. bool "Include fallback EEPROM blob"
  42. depends on P54_SPI
  43. default n
  44. ---help---
  45. Unlike the PCI or USB devices, the SPI variants don't have
  46. a dedicated EEPROM chip to store all device specific values
  47. for calibration, country and interface settings.
  48. The driver will try to load the image "3826.eeprom", if the
  49. file is put at the right place. (usually /lib/firmware.)
  50. Only if this request fails, this option will provide a
  51. backup set of generic values to get the device working.
  52. Enabling this option adds about 4k to p54spi.
  53. config P54_LEDS
  54. bool
  55. depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
  56. default y