123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170 |
- /*
- * Copyright (C) 2002 Intersil Americas Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- */
- #ifndef _ISL_38XX_H
- #define _ISL_38XX_H
- #include <asm/io.h>
- #include <asm/byteorder.h>
- #define ISL38XX_CB_RX_QSIZE 8
- #define ISL38XX_CB_TX_QSIZE 32
- /* ISL38XX Access Point Specific definitions */
- #define ISL38XX_MAX_WDS_LINKS 8
- /* ISL38xx Client Specific definitions */
- #define ISL38XX_PSM_ACTIVE_STATE 0
- #define ISL38XX_PSM_POWERSAVE_STATE 1
- /* ISL38XX Host Interface Definitions */
- #define ISL38XX_PCI_MEM_SIZE 0x02000
- #define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
- #define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
- #define ISL38XX_WRITEIO_DELAY 10 /* in us */
- #define ISL38XX_RESET_DELAY 50 /* in ms */
- #define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
- #define ISL38XX_MAX_WAIT_CYCLES 10
- /* PCI Memory Area */
- #define ISL38XX_HARDWARE_REG 0x0000
- #define ISL38XX_CARDBUS_CIS 0x0800
- #define ISL38XX_DIRECT_MEM_WIN 0x1000
- /* Hardware registers */
- #define ISL38XX_DEV_INT_REG 0x0000
- #define ISL38XX_INT_IDENT_REG 0x0010
- #define ISL38XX_INT_ACK_REG 0x0014
- #define ISL38XX_INT_EN_REG 0x0018
- #define ISL38XX_GEN_PURP_COM_REG_1 0x0020
- #define ISL38XX_GEN_PURP_COM_REG_2 0x0024
- #define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
- #define ISL38XX_DIR_MEM_BASE_REG 0x0030
- #define ISL38XX_CTRL_STAT_REG 0x0078
- /* High end mobos queue up pci writes, the following
- * is used to "read" from after a write to force flush */
- #define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
- /**
- * isl38xx_w32_flush - PCI iomem write helper
- * @base: (host) memory base address of the device
- * @val: 32bit value (host order) to write
- * @offset: byte offset into @base to write value to
- *
- * This helper takes care of writing a 32bit datum to the
- * specified offset into the device's pci memory space, and making sure
- * the pci memory buffers get flushed by performing one harmless read
- * from the %ISL38XX_PCI_POSTING_FLUSH offset.
- */
- static inline void
- isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
- {
- writel(val, base + offset);
- (void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
- }
- /* Device Interrupt register bits */
- #define ISL38XX_DEV_INT_RESET 0x0001
- #define ISL38XX_DEV_INT_UPDATE 0x0002
- #define ISL38XX_DEV_INT_WAKEUP 0x0008
- #define ISL38XX_DEV_INT_SLEEP 0x0010
- /* Interrupt Identification/Acknowledge/Enable register bits */
- #define ISL38XX_INT_IDENT_UPDATE 0x0002
- #define ISL38XX_INT_IDENT_INIT 0x0004
- #define ISL38XX_INT_IDENT_WAKEUP 0x0008
- #define ISL38XX_INT_IDENT_SLEEP 0x0010
- #define ISL38XX_INT_SOURCES 0x001E
- /* Control/Status register bits */
- /* Looks like there are other meaningful bits
- 0x20004400 seen in normal operation,
- 0x200044db at 'timeout waiting for mgmt response'
- */
- #define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
- #define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
- #define ISL38XX_CTRL_STAT_RESET 0x10000000
- #define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
- #define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
- #define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
- /* Control Block definitions */
- #define ISL38XX_CB_RX_DATA_LQ 0
- #define ISL38XX_CB_TX_DATA_LQ 1
- #define ISL38XX_CB_RX_DATA_HQ 2
- #define ISL38XX_CB_TX_DATA_HQ 3
- #define ISL38XX_CB_RX_MGMTQ 4
- #define ISL38XX_CB_TX_MGMTQ 5
- #define ISL38XX_CB_QCOUNT 6
- #define ISL38XX_CB_MGMT_QSIZE 4
- #define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */
- /* Memory Manager definitions */
- #define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
- #define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
- #define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */
- #define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
- #define CONTROL_BLOCK_SIZE 1024 /* should be enough */
- #define PSM_FRAME_SIZE 1536
- #define PSM_MINIMAL_STATION_COUNT 64
- #define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
- #define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
- #define MAX_TRAP_RX_QUEUE 4
- #define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
- /* Fragment package definitions */
- #define FRAGMENT_FLAG_MF 0x0001
- #define MAX_FRAGMENT_SIZE 1536
- /* In monitor mode frames have a header. I don't know exactly how big those
- * frame can be but I've never seen any frame bigger than 1584... :
- */
- #define MAX_FRAGMENT_SIZE_RX 1600
- typedef struct {
- __le32 address; /* physical address on host */
- __le16 size; /* packet size */
- __le16 flags; /* set of bit-wise flags */
- } isl38xx_fragment;
- struct isl38xx_cb {
- __le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
- __le32 device_curr_frag[ISL38XX_CB_QCOUNT];
- isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
- isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
- isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
- isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
- isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
- isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
- };
- typedef struct isl38xx_cb isl38xx_control_block;
- /* determine number of entries currently in queue */
- int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
- void isl38xx_disable_interrupts(void __iomem *);
- void isl38xx_enable_common_interrupts(void __iomem *);
- void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
- void __iomem *);
- void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
- void isl38xx_trigger_device(int, void __iomem *);
- void isl38xx_interface_reset(void __iomem *, dma_addr_t);
- #endif /* _ISL_38XX_H */
|