123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535 |
- /*
- * PCI Express Hot Plug Controller Driver
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/slab.h>
- #include <linux/pci.h>
- #include "../pci.h"
- #include "pciehp.h"
- static void interrupt_event_handler(struct work_struct *work);
- void pciehp_queue_interrupt_event(struct slot *p_slot, u32 event_type)
- {
- struct event_info *info;
- info = kmalloc(sizeof(*info), GFP_ATOMIC);
- if (!info) {
- ctrl_err(p_slot->ctrl, "dropped event %d (ENOMEM)\n", event_type);
- return;
- }
- INIT_WORK(&info->work, interrupt_event_handler);
- info->event_type = event_type;
- info->p_slot = p_slot;
- queue_work(p_slot->wq, &info->work);
- }
- /* The following routines constitute the bulk of the
- hotplug controller logic
- */
- static void set_slot_off(struct controller *ctrl, struct slot *pslot)
- {
- /* turn off slot, turn on Amber LED, turn off Green LED if supported*/
- if (POWER_CTRL(ctrl)) {
- pciehp_power_off_slot(pslot);
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
- }
- pciehp_green_led_off(pslot);
- pciehp_set_attention_status(pslot, 1);
- }
- /**
- * board_added - Called after a board has been added to the system.
- * @p_slot: &slot where board is added
- *
- * Turns power on for the board.
- * Configures board.
- */
- static int board_added(struct slot *p_slot)
- {
- int retval = 0;
- struct controller *ctrl = p_slot->ctrl;
- struct pci_bus *parent = ctrl->pcie->port->subordinate;
- if (POWER_CTRL(ctrl)) {
- /* Power on slot */
- retval = pciehp_power_on_slot(p_slot);
- if (retval)
- return retval;
- }
- pciehp_green_led_blink(p_slot);
- /* Check link training status */
- retval = pciehp_check_link_status(ctrl);
- if (retval) {
- ctrl_err(ctrl, "Failed to check link status\n");
- goto err_exit;
- }
- /* Check for a power fault */
- if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) {
- ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot));
- retval = -EIO;
- goto err_exit;
- }
- retval = pciehp_configure_device(p_slot);
- if (retval) {
- ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
- pci_domain_nr(parent), parent->number);
- if (retval != -EEXIST)
- goto err_exit;
- }
- pciehp_green_led_on(p_slot);
- return 0;
- err_exit:
- set_slot_off(ctrl, p_slot);
- return retval;
- }
- /**
- * remove_board - Turns off slot and LEDs
- * @p_slot: slot where board is being removed
- */
- static int remove_board(struct slot *p_slot)
- {
- int retval;
- struct controller *ctrl = p_slot->ctrl;
- retval = pciehp_unconfigure_device(p_slot);
- if (retval)
- return retval;
- if (POWER_CTRL(ctrl)) {
- pciehp_power_off_slot(p_slot);
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
- }
- /* turn off Green LED */
- pciehp_green_led_off(p_slot);
- return 0;
- }
- struct power_work_info {
- struct slot *p_slot;
- struct work_struct work;
- unsigned int req;
- #define DISABLE_REQ 0
- #define ENABLE_REQ 1
- };
- /**
- * pciehp_power_thread - handle pushbutton events
- * @work: &struct work_struct describing work to be done
- *
- * Scheduled procedure to handle blocking stuff for the pushbuttons.
- * Handles all pending events and exits.
- */
- static void pciehp_power_thread(struct work_struct *work)
- {
- struct power_work_info *info =
- container_of(work, struct power_work_info, work);
- struct slot *p_slot = info->p_slot;
- int ret;
- switch (info->req) {
- case DISABLE_REQ:
- mutex_lock(&p_slot->hotplug_lock);
- pciehp_disable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- mutex_unlock(&p_slot->lock);
- break;
- case ENABLE_REQ:
- mutex_lock(&p_slot->hotplug_lock);
- ret = pciehp_enable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- if (ret)
- pciehp_green_led_off(p_slot);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- mutex_unlock(&p_slot->lock);
- break;
- default:
- break;
- }
- kfree(info);
- }
- static void pciehp_queue_power_work(struct slot *p_slot, int req)
- {
- struct power_work_info *info;
- p_slot->state = (req == ENABLE_REQ) ? POWERON_STATE : POWEROFF_STATE;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info) {
- ctrl_err(p_slot->ctrl, "no memory to queue %s request\n",
- (req == ENABLE_REQ) ? "poweron" : "poweroff");
- return;
- }
- info->p_slot = p_slot;
- INIT_WORK(&info->work, pciehp_power_thread);
- info->req = req;
- queue_work(p_slot->wq, &info->work);
- }
- void pciehp_queue_pushbutton_work(struct work_struct *work)
- {
- struct slot *p_slot = container_of(work, struct slot, work.work);
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
- case BLINKINGOFF_STATE:
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
- break;
- case BLINKINGON_STATE:
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
- break;
- default:
- break;
- }
- mutex_unlock(&p_slot->lock);
- }
- /*
- * Note: This function must be called with slot->lock held
- */
- static void handle_button_press_event(struct slot *p_slot)
- {
- struct controller *ctrl = p_slot->ctrl;
- u8 getstatus;
- switch (p_slot->state) {
- case STATIC_STATE:
- pciehp_get_power_status(p_slot, &getstatus);
- if (getstatus) {
- p_slot->state = BLINKINGOFF_STATE;
- ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n",
- slot_name(p_slot));
- } else {
- p_slot->state = BLINKINGON_STATE;
- ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n",
- slot_name(p_slot));
- }
- /* blink green LED and turn off amber */
- pciehp_green_led_blink(p_slot);
- pciehp_set_attention_status(p_slot, 0);
- queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ);
- break;
- case BLINKINGOFF_STATE:
- case BLINKINGON_STATE:
- /*
- * Cancel if we are still blinking; this means that we
- * press the attention again before the 5 sec. limit
- * expires to cancel hot-add or hot-remove
- */
- ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot));
- cancel_delayed_work(&p_slot->work);
- if (p_slot->state == BLINKINGOFF_STATE)
- pciehp_green_led_on(p_slot);
- else
- pciehp_green_led_off(p_slot);
- pciehp_set_attention_status(p_slot, 0);
- ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n",
- slot_name(p_slot));
- p_slot->state = STATIC_STATE;
- break;
- case POWEROFF_STATE:
- case POWERON_STATE:
- /*
- * Ignore if the slot is on power-on or power-off state;
- * this means that the previous attention button action
- * to hot-add or hot-remove is undergoing
- */
- ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot));
- break;
- default:
- ctrl_warn(ctrl, "ignoring invalid state %#x\n", p_slot->state);
- break;
- }
- }
- /*
- * Note: This function must be called with slot->lock held
- */
- static void handle_surprise_event(struct slot *p_slot)
- {
- u8 getstatus;
- pciehp_get_adapter_status(p_slot, &getstatus);
- if (!getstatus)
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
- else
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
- }
- /*
- * Note: This function must be called with slot->lock held
- */
- static void handle_link_event(struct slot *p_slot, u32 event)
- {
- struct controller *ctrl = p_slot->ctrl;
- switch (p_slot->state) {
- case BLINKINGON_STATE:
- case BLINKINGOFF_STATE:
- cancel_delayed_work(&p_slot->work);
- /* Fall through */
- case STATIC_STATE:
- pciehp_queue_power_work(p_slot, event == INT_LINK_UP ?
- ENABLE_REQ : DISABLE_REQ);
- break;
- case POWERON_STATE:
- if (event == INT_LINK_UP) {
- ctrl_info(ctrl,
- "Link Up event ignored on slot(%s): already powering on\n",
- slot_name(p_slot));
- } else {
- ctrl_info(ctrl,
- "Link Down event queued on slot(%s): currently getting powered on\n",
- slot_name(p_slot));
- pciehp_queue_power_work(p_slot, DISABLE_REQ);
- }
- break;
- case POWEROFF_STATE:
- if (event == INT_LINK_UP) {
- ctrl_info(ctrl,
- "Link Up event queued on slot(%s): currently getting powered off\n",
- slot_name(p_slot));
- pciehp_queue_power_work(p_slot, ENABLE_REQ);
- } else {
- ctrl_info(ctrl,
- "Link Down event ignored on slot(%s): already powering off\n",
- slot_name(p_slot));
- }
- break;
- default:
- ctrl_err(ctrl, "ignoring invalid state %#x on slot(%s)\n",
- p_slot->state, slot_name(p_slot));
- break;
- }
- }
- static void interrupt_event_handler(struct work_struct *work)
- {
- struct event_info *info = container_of(work, struct event_info, work);
- struct slot *p_slot = info->p_slot;
- struct controller *ctrl = p_slot->ctrl;
- mutex_lock(&p_slot->lock);
- switch (info->event_type) {
- case INT_BUTTON_PRESS:
- handle_button_press_event(p_slot);
- break;
- case INT_POWER_FAULT:
- if (!POWER_CTRL(ctrl))
- break;
- pciehp_set_attention_status(p_slot, 1);
- pciehp_green_led_off(p_slot);
- break;
- case INT_PRESENCE_ON:
- handle_surprise_event(p_slot);
- break;
- case INT_PRESENCE_OFF:
- /*
- * Regardless of surprise capability, we need to
- * definitely remove a card that has been pulled out!
- */
- handle_surprise_event(p_slot);
- break;
- case INT_LINK_UP:
- case INT_LINK_DOWN:
- handle_link_event(p_slot, info->event_type);
- break;
- default:
- break;
- }
- mutex_unlock(&p_slot->lock);
- kfree(info);
- }
- /*
- * Note: This function must be called with slot->hotplug_lock held
- */
- int pciehp_enable_slot(struct slot *p_slot)
- {
- u8 getstatus = 0;
- int rc;
- struct controller *ctrl = p_slot->ctrl;
- pciehp_get_adapter_status(p_slot, &getstatus);
- if (!getstatus) {
- ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
- return -ENODEV;
- }
- if (MRL_SENS(p_slot->ctrl)) {
- pciehp_get_latch_status(p_slot, &getstatus);
- if (getstatus) {
- ctrl_info(ctrl, "Latch open on slot(%s)\n",
- slot_name(p_slot));
- return -ENODEV;
- }
- }
- if (POWER_CTRL(p_slot->ctrl)) {
- pciehp_get_power_status(p_slot, &getstatus);
- if (getstatus) {
- ctrl_info(ctrl, "Already enabled on slot(%s)\n",
- slot_name(p_slot));
- return -EINVAL;
- }
- }
- pciehp_get_latch_status(p_slot, &getstatus);
- rc = board_added(p_slot);
- if (rc)
- pciehp_get_latch_status(p_slot, &getstatus);
- return rc;
- }
- /*
- * Note: This function must be called with slot->hotplug_lock held
- */
- int pciehp_disable_slot(struct slot *p_slot)
- {
- u8 getstatus = 0;
- struct controller *ctrl = p_slot->ctrl;
- if (!p_slot->ctrl)
- return 1;
- if (POWER_CTRL(p_slot->ctrl)) {
- pciehp_get_power_status(p_slot, &getstatus);
- if (!getstatus) {
- ctrl_info(ctrl, "Already disabled on slot(%s)\n",
- slot_name(p_slot));
- return -EINVAL;
- }
- }
- return remove_board(p_slot);
- }
- int pciehp_sysfs_enable_slot(struct slot *p_slot)
- {
- int retval = -ENODEV;
- struct controller *ctrl = p_slot->ctrl;
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
- case BLINKINGON_STATE:
- cancel_delayed_work(&p_slot->work);
- case STATIC_STATE:
- p_slot->state = POWERON_STATE;
- mutex_unlock(&p_slot->lock);
- mutex_lock(&p_slot->hotplug_lock);
- retval = pciehp_enable_slot(p_slot);
- mutex_unlock(&p_slot->hotplug_lock);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- break;
- case POWERON_STATE:
- ctrl_info(ctrl, "Slot %s is already in powering on state\n",
- slot_name(p_slot));
- break;
- case BLINKINGOFF_STATE:
- case POWEROFF_STATE:
- ctrl_info(ctrl, "Already enabled on slot %s\n",
- slot_name(p_slot));
- break;
- default:
- ctrl_err(ctrl, "invalid state %#x on slot %s\n",
- p_slot->state, slot_name(p_slot));
- break;
- }
- mutex_unlock(&p_slot->lock);
- return retval;
- }
- int pciehp_sysfs_disable_slot(struct slot *p_slot)
- {
- int retval = -ENODEV;
- struct controller *ctrl = p_slot->ctrl;
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
- case BLINKINGOFF_STATE:
- cancel_delayed_work(&p_slot->work);
- case STATIC_STATE:
- p_slot->state = POWEROFF_STATE;
- mutex_unlock(&p_slot->lock);
- retval = pciehp_disable_slot(p_slot);
- mutex_lock(&p_slot->lock);
- p_slot->state = STATIC_STATE;
- break;
- case POWEROFF_STATE:
- ctrl_info(ctrl, "Slot %s is already in powering off state\n",
- slot_name(p_slot));
- break;
- case BLINKINGON_STATE:
- case POWERON_STATE:
- ctrl_info(ctrl, "Already disabled on slot %s\n",
- slot_name(p_slot));
- break;
- default:
- ctrl_err(ctrl, "invalid state %#x on slot %s\n",
- p_slot->state, slot_name(p_slot));
- break;
- }
- mutex_unlock(&p_slot->lock);
- return retval;
- }
|