phy-mv-usb.h 4.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164
  1. /*
  2. * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
  3. *
  4. * This program is free software; you can redistribute it and/or modify it
  5. * under the terms of the GNU General Public License as published by the
  6. * Free Software Foundation; either version 2 of the License, or (at your
  7. * option) any later version.
  8. */
  9. #ifndef __MV_USB_OTG_CONTROLLER__
  10. #define __MV_USB_OTG_CONTROLLER__
  11. #include <linux/types.h>
  12. /* Command Register Bit Masks */
  13. #define USBCMD_RUN_STOP (0x00000001)
  14. #define USBCMD_CTRL_RESET (0x00000002)
  15. /* otgsc Register Bit Masks */
  16. #define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
  17. #define OTGSC_CTRL_VUSB_CHARGE 0x00000002
  18. #define OTGSC_CTRL_OTG_TERM 0x00000008
  19. #define OTGSC_CTRL_DATA_PULSING 0x00000010
  20. #define OTGSC_STS_USB_ID 0x00000100
  21. #define OTGSC_STS_A_VBUS_VALID 0x00000200
  22. #define OTGSC_STS_A_SESSION_VALID 0x00000400
  23. #define OTGSC_STS_B_SESSION_VALID 0x00000800
  24. #define OTGSC_STS_B_SESSION_END 0x00001000
  25. #define OTGSC_STS_1MS_TOGGLE 0x00002000
  26. #define OTGSC_STS_DATA_PULSING 0x00004000
  27. #define OTGSC_INTSTS_USB_ID 0x00010000
  28. #define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
  29. #define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
  30. #define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
  31. #define OTGSC_INTSTS_B_SESSION_END 0x00100000
  32. #define OTGSC_INTSTS_1MS 0x00200000
  33. #define OTGSC_INTSTS_DATA_PULSING 0x00400000
  34. #define OTGSC_INTR_USB_ID 0x01000000
  35. #define OTGSC_INTR_A_VBUS_VALID 0x02000000
  36. #define OTGSC_INTR_A_SESSION_VALID 0x04000000
  37. #define OTGSC_INTR_B_SESSION_VALID 0x08000000
  38. #define OTGSC_INTR_B_SESSION_END 0x10000000
  39. #define OTGSC_INTR_1MS_TIMER 0x20000000
  40. #define OTGSC_INTR_DATA_PULSING 0x40000000
  41. #define CAPLENGTH_MASK (0xff)
  42. /* Timer's interval, unit 10ms */
  43. #define T_A_WAIT_VRISE 100
  44. #define T_A_WAIT_BCON 2000
  45. #define T_A_AIDL_BDIS 100
  46. #define T_A_BIDL_ADIS 20
  47. #define T_B_ASE0_BRST 400
  48. #define T_B_SE0_SRP 300
  49. #define T_B_SRP_FAIL 2000
  50. #define T_B_DATA_PLS 10
  51. #define T_B_SRP_INIT 100
  52. #define T_A_SRP_RSPNS 10
  53. #define T_A_DRV_RSM 5
  54. enum otg_function {
  55. OTG_B_DEVICE = 0,
  56. OTG_A_DEVICE
  57. };
  58. enum mv_otg_timer {
  59. A_WAIT_BCON_TIMER = 0,
  60. OTG_TIMER_NUM
  61. };
  62. /* PXA OTG state machine */
  63. struct mv_otg_ctrl {
  64. /* internal variables */
  65. u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */
  66. u8 b_srp_done;
  67. u8 b_hnp_en;
  68. /* OTG inputs */
  69. u8 a_bus_drop;
  70. u8 a_bus_req;
  71. u8 a_clr_err;
  72. u8 a_bus_resume;
  73. u8 a_bus_suspend;
  74. u8 a_conn;
  75. u8 a_sess_vld;
  76. u8 a_srp_det;
  77. u8 a_vbus_vld;
  78. u8 b_bus_req; /* B-Device Require Bus */
  79. u8 b_bus_resume;
  80. u8 b_bus_suspend;
  81. u8 b_conn;
  82. u8 b_se0_srp;
  83. u8 b_sess_end;
  84. u8 b_sess_vld;
  85. u8 id;
  86. u8 a_suspend_req;
  87. /*Timer event */
  88. u8 a_aidl_bdis_timeout;
  89. u8 b_ase0_brst_timeout;
  90. u8 a_bidl_adis_timeout;
  91. u8 a_wait_bcon_timeout;
  92. struct timer_list timer[OTG_TIMER_NUM];
  93. };
  94. #define VUSBHS_MAX_PORTS 8
  95. struct mv_otg_regs {
  96. u32 usbcmd; /* Command register */
  97. u32 usbsts; /* Status register */
  98. u32 usbintr; /* Interrupt enable */
  99. u32 frindex; /* Frame index */
  100. u32 reserved1[1];
  101. u32 deviceaddr; /* Device Address */
  102. u32 eplistaddr; /* Endpoint List Address */
  103. u32 ttctrl; /* HOST TT status and control */
  104. u32 burstsize; /* Programmable Burst Size */
  105. u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */
  106. u32 reserved[4];
  107. u32 epnak; /* Endpoint NAK */
  108. u32 epnaken; /* Endpoint NAK Enable */
  109. u32 configflag; /* Configured Flag register */
  110. u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
  111. u32 otgsc;
  112. u32 usbmode; /* USB Host/Device mode */
  113. u32 epsetupstat; /* Endpoint Setup Status */
  114. u32 epprime; /* Endpoint Initialize */
  115. u32 epflush; /* Endpoint De-initialize */
  116. u32 epstatus; /* Endpoint Status */
  117. u32 epcomplete; /* Endpoint Interrupt On Complete */
  118. u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */
  119. u32 mcr; /* Mux Control */
  120. u32 isr; /* Interrupt Status */
  121. u32 ier; /* Interrupt Enable */
  122. };
  123. struct mv_otg {
  124. struct usb_phy phy;
  125. struct mv_otg_ctrl otg_ctrl;
  126. /* base address */
  127. void __iomem *phy_regs;
  128. void __iomem *cap_regs;
  129. struct mv_otg_regs __iomem *op_regs;
  130. struct platform_device *pdev;
  131. int irq;
  132. u32 irq_status;
  133. u32 irq_en;
  134. struct delayed_work work;
  135. struct workqueue_struct *qwork;
  136. spinlock_t wq_lock;
  137. struct mv_usb_platform_data *pdata;
  138. unsigned int active;
  139. unsigned int clock_gating;
  140. struct clk *clk;
  141. };
  142. #endif