wusbhc.h 16 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501
  1. /*
  2. * Wireless USB Host Controller
  3. * Common infrastructure for WHCI and HWA WUSB-HC drivers
  4. *
  5. *
  6. * Copyright (C) 2005-2006 Intel Corporation
  7. * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License version
  11. * 2 as published by the Free Software Foundation.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  21. * 02110-1301, USA.
  22. *
  23. *
  24. * This driver implements parts common to all Wireless USB Host
  25. * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used
  26. * by:
  27. *
  28. * - hwahc: HWA, USB-dongle that implements a Wireless USB host
  29. * controller, (Wireless USB 1.0 Host-Wire-Adapter specification).
  30. *
  31. * - whci: WHCI, a PCI card with a wireless host controller
  32. * (Wireless Host Controller Interface 1.0 specification).
  33. *
  34. * Check out the Design-overview.txt file in the source documentation
  35. * for other details on the implementation.
  36. *
  37. * Main blocks:
  38. *
  39. * rh Root Hub emulation (part of the HCD glue)
  40. *
  41. * devconnect Handle all the issues related to device connection,
  42. * authentication, disconnection, timeout, reseting,
  43. * keepalives, etc.
  44. *
  45. * mmc MMC IE broadcasting handling
  46. *
  47. * A host controller driver just initializes its stuff and as part of
  48. * that, creates a 'struct wusbhc' instance that handles all the
  49. * common WUSB mechanisms. Links in the function ops that are specific
  50. * to it and then registers the host controller. Ready to run.
  51. */
  52. #ifndef __WUSBHC_H__
  53. #define __WUSBHC_H__
  54. #include <linux/usb.h>
  55. #include <linux/list.h>
  56. #include <linux/mutex.h>
  57. #include <linux/kref.h>
  58. #include <linux/workqueue.h>
  59. #include <linux/usb/hcd.h>
  60. #include <linux/uwb.h>
  61. #include <linux/usb/wusb.h>
  62. /*
  63. * Time from a WUSB channel stop request to the last transmitted MMC.
  64. *
  65. * This needs to be > 4.096 ms in case no MMCs can be transmitted in
  66. * zone 0.
  67. */
  68. #define WUSB_CHANNEL_STOP_DELAY_MS 8
  69. #define WUSB_RETRY_COUNT_MAX 15
  70. #define WUSB_RETRY_COUNT_INFINITE 0
  71. /**
  72. * Wireless USB device
  73. *
  74. * Describe a WUSB device connected to the cluster. This struct
  75. * belongs to the 'struct wusb_port' it is attached to and it is
  76. * responsible for putting and clearing the pointer to it.
  77. *
  78. * Note this "complements" the 'struct usb_device' that the usb_hcd
  79. * keeps for each connected USB device. However, it extends some
  80. * information that is not available (there is no hcpriv ptr in it!)
  81. * *and* most importantly, it's life cycle is different. It is created
  82. * as soon as we get a DN_Connect (connect request notification) from
  83. * the device through the WUSB host controller; the USB stack doesn't
  84. * create the device until we authenticate it. FIXME: this will
  85. * change.
  86. *
  87. * @bos: This is allocated when the BOS descriptors are read from
  88. * the device and freed upon the wusb_dev struct dying.
  89. * @wusb_cap_descr: points into @bos, and has been verified to be size
  90. * safe.
  91. */
  92. struct wusb_dev {
  93. struct kref refcnt;
  94. struct wusbhc *wusbhc;
  95. struct list_head cack_node; /* Connect-Ack list */
  96. struct list_head rekey_node; /* GTK rekey list */
  97. u8 port_idx;
  98. u8 addr;
  99. u8 beacon_type:4;
  100. struct usb_encryption_descriptor ccm1_etd;
  101. struct wusb_ckhdid cdid;
  102. unsigned long entry_ts;
  103. struct usb_bos_descriptor *bos;
  104. struct usb_wireless_cap_descriptor *wusb_cap_descr;
  105. struct uwb_mas_bm availability;
  106. struct work_struct devconnect_acked_work;
  107. struct usb_device *usb_dev;
  108. };
  109. #define WUSB_DEV_ADDR_UNAUTH 0x80
  110. static inline void wusb_dev_init(struct wusb_dev *wusb_dev)
  111. {
  112. kref_init(&wusb_dev->refcnt);
  113. /* no need to init the cack_node */
  114. }
  115. extern void wusb_dev_destroy(struct kref *_wusb_dev);
  116. static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev)
  117. {
  118. kref_get(&wusb_dev->refcnt);
  119. return wusb_dev;
  120. }
  121. static inline void wusb_dev_put(struct wusb_dev *wusb_dev)
  122. {
  123. kref_put(&wusb_dev->refcnt, wusb_dev_destroy);
  124. }
  125. /**
  126. * Wireless USB Host Controller root hub "fake" ports
  127. * (state and device information)
  128. *
  129. * Wireless USB is wireless, so there are no ports; but we
  130. * fake'em. Each RC can connect a max of devices at the same time
  131. * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's
  132. * caps), referred to in wusbhc->ports_max.
  133. *
  134. * See rh.c for more information.
  135. *
  136. * The @status and @change use the same bits as in USB2.0[11.24.2.7],
  137. * so we don't have to do much when getting the port's status.
  138. *
  139. * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10],
  140. * include/linux/usb_ch9.h (#define USB_PORT_STAT_*)
  141. */
  142. struct wusb_port {
  143. u16 status;
  144. u16 change;
  145. struct wusb_dev *wusb_dev; /* connected device's info */
  146. u32 ptk_tkid;
  147. };
  148. /**
  149. * WUSB Host Controller specifics
  150. *
  151. * All fields that are common to all Wireless USB controller types
  152. * (HWA and WHCI) are grouped here. Host Controller
  153. * functions/operations that only deal with general Wireless USB HC
  154. * issues use this data type to refer to the host.
  155. *
  156. * @usb_hcd Instantiation of a USB host controller
  157. * (initialized by upper layer [HWA=HC or WHCI].
  158. *
  159. * @dev Device that implements this; initialized by the
  160. * upper layer (HWA-HC, WHCI...); this device should
  161. * have a refcount.
  162. *
  163. * @trust_timeout After this time without hearing for device
  164. * activity, we consider the device gone and we have to
  165. * re-authenticate.
  166. *
  167. * Can be accessed w/o locking--however, read to a
  168. * local variable then use.
  169. *
  170. * @chid WUSB Cluster Host ID: this is supposed to be a
  171. * unique value that doesn't change across reboots (so
  172. * that your devices do not require re-association).
  173. *
  174. * Read/Write protected by @mutex
  175. *
  176. * @dev_info This array has ports_max elements. It is used to
  177. * give the HC information about the WUSB devices (see
  178. * 'struct wusb_dev_info').
  179. *
  180. * For HWA we need to allocate it in heap; for WHCI it
  181. * needs to be permanently mapped, so we keep it for
  182. * both and make it easy. Call wusbhc->dev_info_set()
  183. * to update an entry.
  184. *
  185. * @ports_max Number of simultaneous device connections (fake
  186. * ports) this HC will take. Read-only.
  187. *
  188. * @port Array of port status for each fake root port. Guaranteed to
  189. * always be the same length during device existence
  190. * [this allows for some unlocked but referenced reading].
  191. *
  192. * @mmcies_max Max number of Information Elements this HC can send
  193. * in its MMC. Read-only.
  194. *
  195. * @start Start the WUSB channel.
  196. *
  197. * @stop Stop the WUSB channel after the specified number of
  198. * milliseconds. Channel Stop IEs should be transmitted
  199. * as required by [WUSB] 4.16.2.1.
  200. *
  201. * @mmcie_add HC specific operation (WHCI or HWA) for adding an
  202. * MMCIE.
  203. *
  204. * @mmcie_rm HC specific operation (WHCI or HWA) for removing an
  205. * MMCIE.
  206. *
  207. * @set_ptk: Set the PTK and enable encryption for a device. Or, if
  208. * the supplied key is NULL, disable encryption for that
  209. * device.
  210. *
  211. * @set_gtk: Set the GTK to be used for all future broadcast packets
  212. * (i.e., MMCs). With some hardware, setting the GTK may start
  213. * MMC transmission.
  214. *
  215. * NOTE:
  216. *
  217. * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid
  218. * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev
  219. * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a
  220. * refcount on it).
  221. *
  222. * Most of the times when you need to use it, it will be non-NULL,
  223. * so there is no real need to check for it (wusb_dev will
  224. * disappear before usb_dev).
  225. *
  226. * - The following fields need to be filled out before calling
  227. * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
  228. *
  229. * - there is no wusbhc_init() method, we do everything in
  230. * wusbhc_create().
  231. *
  232. * - Creation is done in two phases, wusbhc_create() and
  233. * wusbhc_create_b(); b are the parts that need to be called after
  234. * calling usb_hcd_add(&wusbhc->usb_hcd).
  235. */
  236. struct wusbhc {
  237. struct usb_hcd usb_hcd; /* HAS TO BE 1st */
  238. struct device *dev;
  239. struct uwb_rc *uwb_rc;
  240. struct uwb_pal pal;
  241. unsigned trust_timeout; /* in jiffies */
  242. struct wusb_ckhdid chid;
  243. uint8_t phy_rate;
  244. uint8_t dnts_num_slots;
  245. uint8_t dnts_interval;
  246. uint8_t retry_count;
  247. struct wuie_host_info *wuie_host_info;
  248. struct mutex mutex; /* locks everything else */
  249. u16 cluster_id; /* Wireless USB Cluster ID */
  250. struct wusb_port *port; /* Fake port status handling */
  251. struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */
  252. u8 ports_max;
  253. unsigned active:1; /* currently xmit'ing MMCs */
  254. struct wuie_keep_alive keep_alive_ie; /* protected by mutex */
  255. struct delayed_work keep_alive_timer;
  256. struct list_head cack_list; /* Connect acknowledging */
  257. size_t cack_count; /* protected by 'mutex' */
  258. struct wuie_connect_ack cack_ie;
  259. struct uwb_rsv *rsv; /* cluster bandwidth reservation */
  260. struct mutex mmcie_mutex; /* MMC WUIE handling */
  261. struct wuie_hdr **mmcie; /* WUIE array */
  262. u8 mmcies_max;
  263. /* FIXME: make wusbhc_ops? */
  264. int (*start)(struct wusbhc *wusbhc);
  265. void (*stop)(struct wusbhc *wusbhc, int delay);
  266. int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
  267. u8 handle, struct wuie_hdr *wuie);
  268. int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle);
  269. int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev);
  270. int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index,
  271. const struct uwb_mas_bm *);
  272. int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx,
  273. u32 tkid, const void *key, size_t key_size);
  274. int (*set_gtk)(struct wusbhc *wusbhc,
  275. u32 tkid, const void *key, size_t key_size);
  276. int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots);
  277. struct {
  278. struct usb_key_descriptor descr;
  279. u8 data[16]; /* GTK key data */
  280. } __attribute__((packed)) gtk;
  281. u8 gtk_index;
  282. u32 gtk_tkid;
  283. /* workqueue for WUSB security related tasks. */
  284. struct workqueue_struct *wq_security;
  285. struct work_struct gtk_rekey_work;
  286. struct usb_encryption_descriptor *ccm1_etd;
  287. };
  288. #define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd)
  289. extern int wusbhc_create(struct wusbhc *);
  290. extern int wusbhc_b_create(struct wusbhc *);
  291. extern void wusbhc_b_destroy(struct wusbhc *);
  292. extern void wusbhc_destroy(struct wusbhc *);
  293. extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *,
  294. struct wusb_dev *);
  295. extern void wusb_dev_sysfs_rm(struct wusb_dev *);
  296. extern int wusbhc_sec_create(struct wusbhc *);
  297. extern int wusbhc_sec_start(struct wusbhc *);
  298. extern void wusbhc_sec_stop(struct wusbhc *);
  299. extern void wusbhc_sec_destroy(struct wusbhc *);
  300. extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb,
  301. int status);
  302. void wusbhc_reset_all(struct wusbhc *wusbhc);
  303. int wusbhc_pal_register(struct wusbhc *wusbhc);
  304. void wusbhc_pal_unregister(struct wusbhc *wusbhc);
  305. /*
  306. * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone
  307. *
  308. * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
  309. *
  310. * This is a safe assumption as @usb_dev->bus is referenced all the
  311. * time during the @usb_dev life cycle.
  312. */
  313. static inline
  314. struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev)
  315. {
  316. struct usb_hcd *usb_hcd;
  317. usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self);
  318. return usb_get_hcd(usb_hcd);
  319. }
  320. /*
  321. * Increment the reference count on a wusbhc.
  322. *
  323. * @wusbhc's life cycle is identical to that of the underlying usb_hcd.
  324. */
  325. static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc)
  326. {
  327. return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL;
  328. }
  329. /*
  330. * Return the wusbhc associated to a @usb_dev
  331. *
  332. * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
  333. *
  334. * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down.
  335. * WARNING: referenced at the usb_hcd level, unlocked
  336. *
  337. * FIXME: move offline
  338. */
  339. static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev)
  340. {
  341. struct wusbhc *wusbhc = NULL;
  342. struct usb_hcd *usb_hcd;
  343. if (usb_dev->devnum > 1 && !usb_dev->wusb) {
  344. /* but root hubs */
  345. dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum,
  346. usb_dev->wusb);
  347. BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb);
  348. }
  349. usb_hcd = usb_hcd_get_by_usb_dev(usb_dev);
  350. if (usb_hcd == NULL)
  351. return NULL;
  352. BUG_ON(usb_hcd->wireless == 0);
  353. return wusbhc = usb_hcd_to_wusbhc(usb_hcd);
  354. }
  355. static inline void wusbhc_put(struct wusbhc *wusbhc)
  356. {
  357. usb_put_hcd(&wusbhc->usb_hcd);
  358. }
  359. int wusbhc_start(struct wusbhc *wusbhc);
  360. void wusbhc_stop(struct wusbhc *wusbhc);
  361. extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *);
  362. /* Device connect handling */
  363. extern int wusbhc_devconnect_create(struct wusbhc *);
  364. extern void wusbhc_devconnect_destroy(struct wusbhc *);
  365. extern int wusbhc_devconnect_start(struct wusbhc *wusbhc);
  366. extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc);
  367. extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr,
  368. struct wusb_dn_hdr *dn_hdr, size_t size);
  369. extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port);
  370. extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
  371. void *priv);
  372. extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
  373. u8 addr);
  374. /* Wireless USB fake Root Hub methods */
  375. extern int wusbhc_rh_create(struct wusbhc *);
  376. extern void wusbhc_rh_destroy(struct wusbhc *);
  377. extern int wusbhc_rh_status_data(struct usb_hcd *, char *);
  378. extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16);
  379. extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned);
  380. /* MMC handling */
  381. extern int wusbhc_mmcie_create(struct wusbhc *);
  382. extern void wusbhc_mmcie_destroy(struct wusbhc *);
  383. extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt,
  384. struct wuie_hdr *);
  385. extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *);
  386. /* Bandwidth reservation */
  387. int wusbhc_rsv_establish(struct wusbhc *wusbhc);
  388. void wusbhc_rsv_terminate(struct wusbhc *wusbhc);
  389. /*
  390. * I've always said
  391. * I wanted a wedding in a church...
  392. *
  393. * but lately I've been thinking about
  394. * the Botanical Gardens.
  395. *
  396. * We could do it by the tulips.
  397. * It'll be beautiful
  398. *
  399. * --Security!
  400. */
  401. extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *,
  402. struct wusb_dev *);
  403. extern void wusb_dev_sec_rm(struct wusb_dev *) ;
  404. extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *,
  405. struct wusb_ckhdid *ck);
  406. void wusbhc_gtk_rekey(struct wusbhc *wusbhc);
  407. int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
  408. /* WUSB Cluster ID handling */
  409. extern u8 wusb_cluster_id_get(void);
  410. extern void wusb_cluster_id_put(u8);
  411. /*
  412. * wusb_port_by_idx - return the port associated to a zero-based port index
  413. *
  414. * NOTE: valid without locking as long as wusbhc is referenced (as the
  415. * number of ports doesn't change). The data pointed to has to
  416. * be verified though :)
  417. */
  418. static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc,
  419. u8 port_idx)
  420. {
  421. return &wusbhc->port[port_idx];
  422. }
  423. /*
  424. * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to
  425. * a port_idx.
  426. *
  427. * USB stack USB ports are 1 based!!
  428. *
  429. * NOTE: only valid for WUSB devices!!!
  430. */
  431. static inline u8 wusb_port_no_to_idx(u8 port_no)
  432. {
  433. return port_no - 1;
  434. }
  435. extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *,
  436. struct usb_device *);
  437. /*
  438. * Return a referenced wusb_dev given a @usb_dev
  439. *
  440. * Returns NULL if the usb_dev is being torn down.
  441. *
  442. * FIXME: move offline
  443. */
  444. static inline
  445. struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev)
  446. {
  447. struct wusbhc *wusbhc;
  448. struct wusb_dev *wusb_dev;
  449. wusbhc = wusbhc_get_by_usb_dev(usb_dev);
  450. if (wusbhc == NULL)
  451. return NULL;
  452. mutex_lock(&wusbhc->mutex);
  453. wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
  454. mutex_unlock(&wusbhc->mutex);
  455. wusbhc_put(wusbhc);
  456. return wusb_dev;
  457. }
  458. /* Misc */
  459. extern struct workqueue_struct *wusbd;
  460. #endif /* #ifndef __WUSBHC_H__ */