123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442 |
- /*
- * w1_ds28e04.c - w1 family 1C (DS28E04) driver
- *
- * Copyright (c) 2012 Markus Franke <franke.m@sebakmt.com>
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2. See the file COPYING for more details.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/device.h>
- #include <linux/types.h>
- #include <linux/delay.h>
- #include <linux/slab.h>
- #include <linux/crc16.h>
- #include <linux/uaccess.h>
- #define CRC16_INIT 0
- #define CRC16_VALID 0xb001
- #include "../w1.h"
- #include "../w1_int.h"
- #include "../w1_family.h"
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>");
- MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO");
- MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E04));
- /* Allow the strong pullup to be disabled, but default to enabled.
- * If it was disabled a parasite powered device might not get the required
- * current to copy the data from the scratchpad to EEPROM. If it is enabled
- * parasite powered devices have a better chance of getting the current
- * required.
- */
- static int w1_strong_pullup = 1;
- module_param_named(strong_pullup, w1_strong_pullup, int, 0);
- /* enable/disable CRC checking on DS28E04-100 memory accesses */
- static char w1_enable_crccheck = 1;
- #define W1_EEPROM_SIZE 512
- #define W1_PAGE_COUNT 16
- #define W1_PAGE_SIZE 32
- #define W1_PAGE_BITS 5
- #define W1_PAGE_MASK 0x1F
- #define W1_F1C_READ_EEPROM 0xF0
- #define W1_F1C_WRITE_SCRATCH 0x0F
- #define W1_F1C_READ_SCRATCH 0xAA
- #define W1_F1C_COPY_SCRATCH 0x55
- #define W1_F1C_ACCESS_WRITE 0x5A
- #define W1_1C_REG_LOGIC_STATE 0x220
- struct w1_f1C_data {
- u8 memory[W1_EEPROM_SIZE];
- u32 validcrc;
- };
- /**
- * Check the file size bounds and adjusts count as needed.
- * This would not be needed if the file size didn't reset to 0 after a write.
- */
- static inline size_t w1_f1C_fix_count(loff_t off, size_t count, size_t size)
- {
- if (off > size)
- return 0;
- if ((off + count) > size)
- return size - off;
- return count;
- }
- static int w1_f1C_refresh_block(struct w1_slave *sl, struct w1_f1C_data *data,
- int block)
- {
- u8 wrbuf[3];
- int off = block * W1_PAGE_SIZE;
- if (data->validcrc & (1 << block))
- return 0;
- if (w1_reset_select_slave(sl)) {
- data->validcrc = 0;
- return -EIO;
- }
- wrbuf[0] = W1_F1C_READ_EEPROM;
- wrbuf[1] = off & 0xff;
- wrbuf[2] = off >> 8;
- w1_write_block(sl->master, wrbuf, 3);
- w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE);
- /* cache the block if the CRC is valid */
- if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID)
- data->validcrc |= (1 << block);
- return 0;
- }
- static int w1_f1C_read(struct w1_slave *sl, int addr, int len, char *data)
- {
- u8 wrbuf[3];
- /* read directly from the EEPROM */
- if (w1_reset_select_slave(sl))
- return -EIO;
- wrbuf[0] = W1_F1C_READ_EEPROM;
- wrbuf[1] = addr & 0xff;
- wrbuf[2] = addr >> 8;
- w1_write_block(sl->master, wrbuf, sizeof(wrbuf));
- return w1_read_block(sl->master, data, len);
- }
- static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t off, size_t count)
- {
- struct w1_slave *sl = kobj_to_w1_slave(kobj);
- struct w1_f1C_data *data = sl->family_data;
- int i, min_page, max_page;
- count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
- if (count == 0)
- return 0;
- mutex_lock(&sl->master->mutex);
- if (w1_enable_crccheck) {
- min_page = (off >> W1_PAGE_BITS);
- max_page = (off + count - 1) >> W1_PAGE_BITS;
- for (i = min_page; i <= max_page; i++) {
- if (w1_f1C_refresh_block(sl, data, i)) {
- count = -EIO;
- goto out_up;
- }
- }
- memcpy(buf, &data->memory[off], count);
- } else {
- count = w1_f1C_read(sl, off, count, buf);
- }
- out_up:
- mutex_unlock(&sl->master->mutex);
- return count;
- }
- /**
- * Writes to the scratchpad and reads it back for verification.
- * Then copies the scratchpad to EEPROM.
- * The data must be on one page.
- * The master must be locked.
- *
- * @param sl The slave structure
- * @param addr Address for the write
- * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
- * @param data The data to write
- * @return 0=Success -1=failure
- */
- static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
- {
- u8 wrbuf[4];
- u8 rdbuf[W1_PAGE_SIZE + 3];
- u8 es = (addr + len - 1) & 0x1f;
- unsigned int tm = 10;
- int i;
- struct w1_f1C_data *f1C = sl->family_data;
- /* Write the data to the scratchpad */
- if (w1_reset_select_slave(sl))
- return -1;
- wrbuf[0] = W1_F1C_WRITE_SCRATCH;
- wrbuf[1] = addr & 0xff;
- wrbuf[2] = addr >> 8;
- w1_write_block(sl->master, wrbuf, 3);
- w1_write_block(sl->master, data, len);
- /* Read the scratchpad and verify */
- if (w1_reset_select_slave(sl))
- return -1;
- w1_write_8(sl->master, W1_F1C_READ_SCRATCH);
- w1_read_block(sl->master, rdbuf, len + 3);
- /* Compare what was read against the data written */
- if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
- (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
- return -1;
- /* Copy the scratchpad to EEPROM */
- if (w1_reset_select_slave(sl))
- return -1;
- wrbuf[0] = W1_F1C_COPY_SCRATCH;
- wrbuf[3] = es;
- for (i = 0; i < sizeof(wrbuf); ++i) {
- /* issue 10ms strong pullup (or delay) on the last byte
- for writing the data from the scratchpad to EEPROM */
- if (w1_strong_pullup && i == sizeof(wrbuf)-1)
- w1_next_pullup(sl->master, tm);
- w1_write_8(sl->master, wrbuf[i]);
- }
- if (!w1_strong_pullup)
- msleep(tm);
- if (w1_enable_crccheck) {
- /* invalidate cached data */
- f1C->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
- }
- /* Reset the bus to wake up the EEPROM (this may not be needed) */
- w1_reset_bus(sl->master);
- return 0;
- }
- static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t off, size_t count)
- {
- struct w1_slave *sl = kobj_to_w1_slave(kobj);
- int addr, len, idx;
- count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
- if (count == 0)
- return 0;
- if (w1_enable_crccheck) {
- /* can only write full blocks in cached mode */
- if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) {
- dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n",
- (int)off, count);
- return -EINVAL;
- }
- /* make sure the block CRCs are valid */
- for (idx = 0; idx < count; idx += W1_PAGE_SIZE) {
- if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE)
- != CRC16_VALID) {
- dev_err(&sl->dev, "bad CRC at offset %d\n",
- (int)off);
- return -EINVAL;
- }
- }
- }
- mutex_lock(&sl->master->mutex);
- /* Can only write data to one page at a time */
- idx = 0;
- while (idx < count) {
- addr = off + idx;
- len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
- if (len > (count - idx))
- len = count - idx;
- if (w1_f1C_write(sl, addr, len, &buf[idx]) < 0) {
- count = -EIO;
- goto out_up;
- }
- idx += len;
- }
- out_up:
- mutex_unlock(&sl->master->mutex);
- return count;
- }
- static BIN_ATTR_RW(eeprom, W1_EEPROM_SIZE);
- static ssize_t pio_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf, loff_t off,
- size_t count)
- {
- struct w1_slave *sl = kobj_to_w1_slave(kobj);
- int ret;
- /* check arguments */
- if (off != 0 || count != 1 || buf == NULL)
- return -EINVAL;
- mutex_lock(&sl->master->mutex);
- ret = w1_f1C_read(sl, W1_1C_REG_LOGIC_STATE, count, buf);
- mutex_unlock(&sl->master->mutex);
- return ret;
- }
- static ssize_t pio_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf, loff_t off,
- size_t count)
- {
- struct w1_slave *sl = kobj_to_w1_slave(kobj);
- u8 wrbuf[3];
- u8 ack;
- /* check arguments */
- if (off != 0 || count != 1 || buf == NULL)
- return -EINVAL;
- mutex_lock(&sl->master->mutex);
- /* Write the PIO data */
- if (w1_reset_select_slave(sl)) {
- mutex_unlock(&sl->master->mutex);
- return -1;
- }
- /* set bit 7..2 to value '1' */
- *buf = *buf | 0xFC;
- wrbuf[0] = W1_F1C_ACCESS_WRITE;
- wrbuf[1] = *buf;
- wrbuf[2] = ~(*buf);
- w1_write_block(sl->master, wrbuf, 3);
- w1_read_block(sl->master, &ack, sizeof(ack));
- mutex_unlock(&sl->master->mutex);
- /* check for acknowledgement */
- if (ack != 0xAA)
- return -EIO;
- return count;
- }
- static BIN_ATTR_RW(pio, 1);
- static ssize_t crccheck_show(struct device *dev, struct device_attribute *attr,
- char *buf)
- {
- if (put_user(w1_enable_crccheck + 0x30, buf))
- return -EFAULT;
- return sizeof(w1_enable_crccheck);
- }
- static ssize_t crccheck_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
- {
- char val;
- if (count != 1 || !buf)
- return -EINVAL;
- if (get_user(val, buf))
- return -EFAULT;
- /* convert to decimal */
- val = val - 0x30;
- if (val != 0 && val != 1)
- return -EINVAL;
- /* set the new value */
- w1_enable_crccheck = val;
- return sizeof(w1_enable_crccheck);
- }
- static DEVICE_ATTR_RW(crccheck);
- static struct attribute *w1_f1C_attrs[] = {
- &dev_attr_crccheck.attr,
- NULL,
- };
- static struct bin_attribute *w1_f1C_bin_attrs[] = {
- &bin_attr_eeprom,
- &bin_attr_pio,
- NULL,
- };
- static const struct attribute_group w1_f1C_group = {
- .attrs = w1_f1C_attrs,
- .bin_attrs = w1_f1C_bin_attrs,
- };
- static const struct attribute_group *w1_f1C_groups[] = {
- &w1_f1C_group,
- NULL,
- };
- static int w1_f1C_add_slave(struct w1_slave *sl)
- {
- struct w1_f1C_data *data = NULL;
- if (w1_enable_crccheck) {
- data = kzalloc(sizeof(struct w1_f1C_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- sl->family_data = data;
- }
- return 0;
- }
- static void w1_f1C_remove_slave(struct w1_slave *sl)
- {
- kfree(sl->family_data);
- sl->family_data = NULL;
- }
- static struct w1_family_ops w1_f1C_fops = {
- .add_slave = w1_f1C_add_slave,
- .remove_slave = w1_f1C_remove_slave,
- .groups = w1_f1C_groups,
- };
- static struct w1_family w1_family_1C = {
- .fid = W1_FAMILY_DS28E04,
- .fops = &w1_f1C_fops,
- };
- static int __init w1_f1C_init(void)
- {
- return w1_register_family(&w1_family_1C);
- }
- static void __exit w1_f1C_fini(void)
- {
- w1_unregister_family(&w1_family_1C);
- }
- module_init(w1_f1C_init);
- module_exit(w1_f1C_fini);
|