123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123 |
- /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
- * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
- * derived from Data Sheet, Copyright Motorola 1984 (!).
- * It was written to be part of the Linux operating system.
- */
- /* permission is hereby granted to copy, modify and redistribute this code
- * in terms of the GNU Library General Public License, Version 2 or later,
- * at your option.
- */
- #ifndef _MC146818RTC_H
- #define _MC146818RTC_H
- #include <asm/io.h>
- #include <linux/rtc.h> /* get the user-level API */
- #include <asm/mc146818rtc.h> /* register access macros */
- #ifdef __KERNEL__
- #include <linux/spinlock.h> /* spinlock_t */
- extern spinlock_t rtc_lock; /* serialize CMOS RAM access */
- /* Some RTCs extend the mc146818 register set to support alarms of more
- * than 24 hours in the future; or dates that include a century code.
- * This platform_data structure can pass this information to the driver.
- *
- * Also, some platforms need suspend()/resume() hooks to kick in special
- * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
- * a separate wakeup alarm used by some almost-clone chips.
- */
- struct cmos_rtc_board_info {
- void (*wake_on)(struct device *dev);
- void (*wake_off)(struct device *dev);
- u32 flags;
- #define CMOS_RTC_FLAGS_NOFREQ (1 << 0)
- int address_space;
- u8 rtc_day_alarm; /* zero, or register index */
- u8 rtc_mon_alarm; /* zero, or register index */
- u8 rtc_century; /* zero, or register index */
- };
- #endif
- /**********************************************************************
- * register summary
- **********************************************************************/
- #define RTC_SECONDS 0
- #define RTC_SECONDS_ALARM 1
- #define RTC_MINUTES 2
- #define RTC_MINUTES_ALARM 3
- #define RTC_HOURS 4
- #define RTC_HOURS_ALARM 5
- /* RTC_*_alarm is always true if 2 MSBs are set */
- # define RTC_ALARM_DONT_CARE 0xC0
- #define RTC_DAY_OF_WEEK 6
- #define RTC_DAY_OF_MONTH 7
- #define RTC_MONTH 8
- #define RTC_YEAR 9
- /* control registers - Moto names
- */
- #define RTC_REG_A 10
- #define RTC_REG_B 11
- #define RTC_REG_C 12
- #define RTC_REG_D 13
- /**********************************************************************
- * register details
- **********************************************************************/
- #define RTC_FREQ_SELECT RTC_REG_A
- /* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus,
- * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
- * totalling to a max high interval of 2.228 ms.
- */
- # define RTC_UIP 0x80
- # define RTC_DIV_CTL 0x70
- /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
- # define RTC_REF_CLCK_4MHZ 0x00
- # define RTC_REF_CLCK_1MHZ 0x10
- # define RTC_REF_CLCK_32KHZ 0x20
- /* 2 values for divider stage reset, others for "testing purposes only" */
- # define RTC_DIV_RESET1 0x60
- # define RTC_DIV_RESET2 0x70
- /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
- # define RTC_RATE_SELECT 0x0F
- /**********************************************************************/
- #define RTC_CONTROL RTC_REG_B
- # define RTC_SET 0x80 /* disable updates for clock setting */
- # define RTC_PIE 0x40 /* periodic interrupt enable */
- # define RTC_AIE 0x20 /* alarm interrupt enable */
- # define RTC_UIE 0x10 /* update-finished interrupt enable */
- # define RTC_SQWE 0x08 /* enable square-wave output */
- # define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
- # define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
- # define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
- /**********************************************************************/
- #define RTC_INTR_FLAGS RTC_REG_C
- /* caution - cleared by read */
- # define RTC_IRQF 0x80 /* any of the following 3 is active */
- # define RTC_PF 0x40
- # define RTC_AF 0x20
- # define RTC_UF 0x10
- /**********************************************************************/
- #define RTC_VALID RTC_REG_D
- # define RTC_VRT 0x80 /* valid RAM and time */
- /**********************************************************************/
- #ifndef ARCH_RTC_LOCATION /* Override by <asm/mc146818rtc.h>? */
- #define RTC_IO_EXTENT 0x8
- #define RTC_IO_EXTENT_USED 0x2
- #define RTC_IOMAPPED 1 /* Default to I/O mapping. */
- #else
- #define RTC_IO_EXTENT_USED RTC_IO_EXTENT
- #endif /* ARCH_RTC_LOCATION */
- #endif /* _MC146818RTC_H */
|