123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121 |
- /*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #define OMAP_MMC_MAX_SLOTS 2
- struct mmc_card;
- struct omap_mmc_platform_data {
- /* back-link to device */
- struct device *dev;
- /* number of slots per controller */
- unsigned nr_slots:2;
- /* set if your board has components or wiring that limits the
- * maximum frequency on the MMC bus */
- unsigned int max_freq;
- /* switch the bus to a new slot */
- int (*switch_slot)(struct device *dev, int slot);
- /* initialize board-specific MMC functionality, can be NULL if
- * not supported */
- int (*init)(struct device *dev);
- void (*cleanup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- /* Return context loss count due to PM states changing */
- int (*get_context_loss_count)(struct device *dev);
- /* Integrating attributes from the omap_hwmod layer */
- u8 controller_flags;
- /* Register offset deviation */
- u16 reg_offset;
- struct omap_mmc_slot_data {
- /*
- * 4/8 wires and any additional host capabilities
- * need to OR'd all capabilities (ref. linux/mmc/host.h)
- */
- u8 wires; /* Used for the MMC driver on omap1 and 2420 */
- u32 caps; /* Used for the MMC driver on 2430 and later */
- u32 pm_caps; /* PM capabilities of the mmc */
- /*
- * nomux means "standard" muxing is wrong on this board, and
- * that board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* switch pin can be for card detect (default) or card cover */
- unsigned cover:1;
- /* use the internal clock */
- unsigned internal_clock:1;
- /* nonremovable e.g. eMMC */
- unsigned nonremovable:1;
- /* Try to sleep or power off when possible */
- unsigned power_saving:1;
- /* If using power_saving and the MMC power is not to go off */
- unsigned no_off:1;
- /* eMMC does not handle power off when not in sleep state */
- unsigned no_regulator_off_init:1;
- /* Regulator off remapped to sleep */
- unsigned vcc_aux_disable_is_sleep:1;
- /* we can put the features above into this variable */
- #define MMC_OMAP7XX (1 << 3)
- #define MMC_OMAP15XX (1 << 4)
- #define MMC_OMAP16XX (1 << 5)
- unsigned features;
- int switch_pin; /* gpio (card detect) */
- int gpio_wp; /* gpio (write protect) */
- int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
- int (*set_power)(struct device *dev, int slot,
- int power_on, int vdd);
- int (*get_ro)(struct device *dev, int slot);
- void (*remux)(struct device *dev, int slot, int power_on);
- /* Call back before enabling / disabling regulators */
- void (*before_set_reg)(struct device *dev, int slot,
- int power_on, int vdd);
- /* Call back after enabling / disabling regulators */
- void (*after_set_reg)(struct device *dev, int slot,
- int power_on, int vdd);
- /* if we have special card, init it using this callback */
- void (*init_card)(struct mmc_card *card);
- /* return MMC cover switch state, can be NULL if not supported.
- *
- * possible return values:
- * 0 - closed
- * 1 - open
- */
- int (*get_cover_state)(struct device *dev, int slot);
- const char *name;
- u32 ocr_mask;
- /* Card detection IRQs */
- int card_detect_irq;
- int (*card_detect)(struct device *dev, int slot);
- unsigned int ban_openended:1;
- } slots[OMAP_MMC_MAX_SLOTS];
- };
|