123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148 |
- #ifndef _LINUX_U64_STATS_SYNC_H
- #define _LINUX_U64_STATS_SYNC_H
- /*
- * To properly implement 64bits network statistics on 32bit and 64bit hosts,
- * we provide a synchronization point, that is a noop on 64bit or UP kernels.
- *
- * Key points :
- * 1) Use a seqcount on SMP 32bits, with low overhead.
- * 2) Whole thing is a noop on 64bit arches or UP kernels.
- * 3) Write side must ensure mutual exclusion or one seqcount update could
- * be lost, thus blocking readers forever.
- * If this synchronization point is not a mutex, but a spinlock or
- * spinlock_bh() or disable_bh() :
- * 3.1) Write side should not sleep.
- * 3.2) Write side should not allow preemption.
- * 3.3) If applicable, interrupts should be disabled.
- *
- * 4) If reader fetches several counters, there is no guarantee the whole values
- * are consistent (remember point 1) : this is a noop on 64bit arches anyway)
- *
- * 5) readers are allowed to sleep or be preempted/interrupted : They perform
- * pure reads. But if they have to fetch many values, it's better to not allow
- * preemptions/interruptions to avoid many retries.
- *
- * 6) If counter might be written by an interrupt, readers should block interrupts.
- * (On UP, there is no seqcount_t protection, a reader allowing interrupts could
- * read partial values)
- *
- * 7) For irq and softirq uses, readers can use u64_stats_fetch_begin_irq() and
- * u64_stats_fetch_retry_irq() helpers
- *
- * Usage :
- *
- * Stats producer (writer) should use following template granted it already got
- * an exclusive access to counters (a lock is already taken, or per cpu
- * data is used [in a non preemptable context])
- *
- * spin_lock_bh(...) or other synchronization to get exclusive access
- * ...
- * u64_stats_update_begin(&stats->syncp);
- * stats->bytes64 += len; // non atomic operation
- * stats->packets64++; // non atomic operation
- * u64_stats_update_end(&stats->syncp);
- *
- * While a consumer (reader) should use following template to get consistent
- * snapshot for each variable (but no guarantee on several ones)
- *
- * u64 tbytes, tpackets;
- * unsigned int start;
- *
- * do {
- * start = u64_stats_fetch_begin(&stats->syncp);
- * tbytes = stats->bytes64; // non atomic operation
- * tpackets = stats->packets64; // non atomic operation
- * } while (u64_stats_fetch_retry(&stats->syncp, start));
- *
- *
- * Example of use in drivers/net/loopback.c, using per_cpu containers,
- * in BH disabled context.
- */
- #include <linux/seqlock.h>
- struct u64_stats_sync {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- seqcount_t seq;
- #endif
- };
- static inline void u64_stats_init(struct u64_stats_sync *syncp)
- {
- #if BITS_PER_LONG == 32 && defined(CONFIG_SMP)
- seqcount_init(&syncp->seq);
- #endif
- }
- static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- write_seqcount_begin(&syncp->seq);
- #endif
- }
- static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- write_seqcount_end(&syncp->seq);
- #endif
- }
- static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- return read_seqcount_begin(&syncp->seq);
- #else
- #if BITS_PER_LONG==32
- preempt_disable();
- #endif
- return 0;
- #endif
- }
- static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
- unsigned int start)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- return read_seqcount_retry(&syncp->seq, start);
- #else
- #if BITS_PER_LONG==32
- preempt_enable();
- #endif
- return false;
- #endif
- }
- /*
- * In case irq handlers can update u64 counters, readers can use following helpers
- * - SMP 32bit arches use seqcount protection, irq safe.
- * - UP 32bit must disable irqs.
- * - 64bit have no problem atomically reading u64 values, irq safe.
- */
- static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync *syncp)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- return read_seqcount_begin(&syncp->seq);
- #else
- #if BITS_PER_LONG==32
- local_irq_disable();
- #endif
- return 0;
- #endif
- }
- static inline bool u64_stats_fetch_retry_irq(const struct u64_stats_sync *syncp,
- unsigned int start)
- {
- #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
- return read_seqcount_retry(&syncp->seq, start);
- #else
- #if BITS_PER_LONG==32
- local_irq_enable();
- #endif
- return false;
- #endif
- }
- #endif /* _LINUX_U64_STATS_SYNC_H */
|