autoprobe.c 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185
  1. /*
  2. * linux/kernel/irq/autoprobe.c
  3. *
  4. * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
  5. *
  6. * This file contains the interrupt probing code and driver APIs.
  7. */
  8. #include <linux/irq.h>
  9. #include <linux/module.h>
  10. #include <linux/interrupt.h>
  11. #include <linux/delay.h>
  12. #include <linux/async.h>
  13. #include "internals.h"
  14. /*
  15. * Autodetection depends on the fact that any interrupt that
  16. * comes in on to an unassigned handler will get stuck with
  17. * "IRQS_WAITING" cleared and the interrupt disabled.
  18. */
  19. static DEFINE_MUTEX(probing_active);
  20. /**
  21. * probe_irq_on - begin an interrupt autodetect
  22. *
  23. * Commence probing for an interrupt. The interrupts are scanned
  24. * and a mask of potential interrupt lines is returned.
  25. *
  26. */
  27. unsigned long probe_irq_on(void)
  28. {
  29. struct irq_desc *desc;
  30. unsigned long mask = 0;
  31. int i;
  32. /*
  33. * quiesce the kernel, or at least the asynchronous portion
  34. */
  35. async_synchronize_full();
  36. mutex_lock(&probing_active);
  37. /*
  38. * something may have generated an irq long ago and we want to
  39. * flush such a longstanding irq before considering it as spurious.
  40. */
  41. for_each_irq_desc_reverse(i, desc) {
  42. raw_spin_lock_irq(&desc->lock);
  43. if (!desc->action && irq_settings_can_probe(desc)) {
  44. /*
  45. * Some chips need to know about probing in
  46. * progress:
  47. */
  48. if (desc->irq_data.chip->irq_set_type)
  49. desc->irq_data.chip->irq_set_type(&desc->irq_data,
  50. IRQ_TYPE_PROBE);
  51. irq_startup(desc, false);
  52. }
  53. raw_spin_unlock_irq(&desc->lock);
  54. }
  55. /* Wait for longstanding interrupts to trigger. */
  56. msleep(20);
  57. /*
  58. * enable any unassigned irqs
  59. * (we must startup again here because if a longstanding irq
  60. * happened in the previous stage, it may have masked itself)
  61. */
  62. for_each_irq_desc_reverse(i, desc) {
  63. raw_spin_lock_irq(&desc->lock);
  64. if (!desc->action && irq_settings_can_probe(desc)) {
  65. desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
  66. if (irq_startup(desc, false))
  67. desc->istate |= IRQS_PENDING;
  68. }
  69. raw_spin_unlock_irq(&desc->lock);
  70. }
  71. /*
  72. * Wait for spurious interrupts to trigger
  73. */
  74. msleep(100);
  75. /*
  76. * Now filter out any obviously spurious interrupts
  77. */
  78. for_each_irq_desc(i, desc) {
  79. raw_spin_lock_irq(&desc->lock);
  80. if (desc->istate & IRQS_AUTODETECT) {
  81. /* It triggered already - consider it spurious. */
  82. if (!(desc->istate & IRQS_WAITING)) {
  83. desc->istate &= ~IRQS_AUTODETECT;
  84. irq_shutdown(desc);
  85. } else
  86. if (i < 32)
  87. mask |= 1 << i;
  88. }
  89. raw_spin_unlock_irq(&desc->lock);
  90. }
  91. return mask;
  92. }
  93. EXPORT_SYMBOL(probe_irq_on);
  94. /**
  95. * probe_irq_mask - scan a bitmap of interrupt lines
  96. * @val: mask of interrupts to consider
  97. *
  98. * Scan the interrupt lines and return a bitmap of active
  99. * autodetect interrupts. The interrupt probe logic state
  100. * is then returned to its previous value.
  101. *
  102. * Note: we need to scan all the irq's even though we will
  103. * only return autodetect irq numbers - just so that we reset
  104. * them all to a known state.
  105. */
  106. unsigned int probe_irq_mask(unsigned long val)
  107. {
  108. unsigned int mask = 0;
  109. struct irq_desc *desc;
  110. int i;
  111. for_each_irq_desc(i, desc) {
  112. raw_spin_lock_irq(&desc->lock);
  113. if (desc->istate & IRQS_AUTODETECT) {
  114. if (i < 16 && !(desc->istate & IRQS_WAITING))
  115. mask |= 1 << i;
  116. desc->istate &= ~IRQS_AUTODETECT;
  117. irq_shutdown(desc);
  118. }
  119. raw_spin_unlock_irq(&desc->lock);
  120. }
  121. mutex_unlock(&probing_active);
  122. return mask & val;
  123. }
  124. EXPORT_SYMBOL(probe_irq_mask);
  125. /**
  126. * probe_irq_off - end an interrupt autodetect
  127. * @val: mask of potential interrupts (unused)
  128. *
  129. * Scans the unused interrupt lines and returns the line which
  130. * appears to have triggered the interrupt. If no interrupt was
  131. * found then zero is returned. If more than one interrupt is
  132. * found then minus the first candidate is returned to indicate
  133. * their is doubt.
  134. *
  135. * The interrupt probe logic state is returned to its previous
  136. * value.
  137. *
  138. * BUGS: When used in a module (which arguably shouldn't happen)
  139. * nothing prevents two IRQ probe callers from overlapping. The
  140. * results of this are non-optimal.
  141. */
  142. int probe_irq_off(unsigned long val)
  143. {
  144. int i, irq_found = 0, nr_of_irqs = 0;
  145. struct irq_desc *desc;
  146. for_each_irq_desc(i, desc) {
  147. raw_spin_lock_irq(&desc->lock);
  148. if (desc->istate & IRQS_AUTODETECT) {
  149. if (!(desc->istate & IRQS_WAITING)) {
  150. if (!nr_of_irqs)
  151. irq_found = i;
  152. nr_of_irqs++;
  153. }
  154. desc->istate &= ~IRQS_AUTODETECT;
  155. irq_shutdown(desc);
  156. }
  157. raw_spin_unlock_irq(&desc->lock);
  158. }
  159. mutex_unlock(&probing_active);
  160. if (nr_of_irqs > 1)
  161. irq_found = -irq_found;
  162. return irq_found;
  163. }
  164. EXPORT_SYMBOL(probe_irq_off);