;!
;! Automatically generated configuration file
;! Filename: manager.conf (/etc/asterisk/manager.conf)
;! Generator: Manager
;! Creation Date: Wed Nov 11 15:56:12 2015
;!
;
; AMI - The Asterisk Manager Interface
; 
; Third party application call management support and PBX event supervision
;
; This configuration file is read every time someone logs in
;
; Use the "manager list commands" at the CLI to list available manager commands
; and their authorization levels.
;
; "manager show command <command>" will show a help text.
;
; ---------------------------- SECURITY NOTE -------------------------------
; Note that you should not enable the AMI on a public IP address. If needed,
; block this TCP port with iptables (or another FW software) and reach it
; with IPsec, SSH, or SSL vpn tunnel.  You can also make the manager 
; interface available over http if Asterisk's http server is enabled in
; http.conf and if both "enabled" and "webenabled" are set to yes in
; this file.  Both default to no.  httptimeout provides the maximum 
; timeout in seconds before a web based session is discarded.  The 
; default is 60 seconds.
;
[general]
;displaysystemname = yes
enabled = yes
webenabled = yes
port = 5038

httptimeout = 60
; a) httptimeout sets the Max-Age of the http cookie
; b) httptimeout is the amount of time the webserver waits 
;    on a action=waitevent request (actually its httptimeout-10)
; c) httptimeout is also the amount of time the webserver keeps 
;    a http session alive after completing a successful action

bindaddr = 0.0.0.0
displayconnects = yes
;
; Add a Unix epoch timestamp to events (not action responses)
;
timestampevents = yes

[admin]
secret = admin
permit = 0.0.0.0/0.0.0.0
#permit = 127.0.0.1/255.255.255.255
;
; If the device connected via this user accepts input slowly,
; the timeout for writes to it can be increased to keep it
; from being disconnected (value is in milliseconds)
;
; writetimeout = 100
;
; Authorization for various classes 
read = all,system,call,log,verbose,command,agent,user,config,originate
write = all,system,call,log,verbose,command,agent,user,config,originate

[openapi]
secret = e845116521d590069f285ddde46ee2cf
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1/255.255.255.255
permit = 192.168.0.0/255.255.0.0
read = all,system,call,log,verbose,command,agent,user,config,originate
write = all,system,call,log,verbose,command,agent,user,config,originate
eventfilter=Event: QueueMemberPause
eventfilter=Event: Newchannel
eventfilter=Event: ExtensionStatus
eventfilter=Event: Hangup
eventfilter=Event: Newstate
eventfilter=Event: Cdr
eventfilter=Event: DialBegin
eventfilter=Event: DialEnd
eventfilter=Event: AgentCalled
eventfilter=Event: AgentConnect
eventfilter=Event: AgentComplete
eventfilter=Event: AgentRingNoAnswer
eventfilter=Event: QueueCallerJoin
eventfilter=Event: QueueCallerLeave
eventfilter=Event: QueueMemberStatus
eventfilter=Event: UserEvent
eventfilter=Event: PeerStatus
eventfilter=Event: Reload