| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- ;
- ; Open Sound System Console Driver Configuration File
- ;
- [general]
- ;
- ; Automatically answer incoming calls on the console? Choose yes if
- ; for example you want to use this as an intercom.
- ;
- autoanswer=yes
- ;
- ; Default context (is overridden with @context syntax)
- ;
- context=local
- ;
- ; Default extension to call
- ;
- extension=s
- ;
- ; Default language
- ;
- ;language=en
- ;
- ; Default Music on Hold class to use when this channel is placed on hold in
- ; the case that the music class is not set on the channel with
- ; Set(CHANNEL(musicclass)=whatever) in the dialplan and the peer channel
- ; putting this one on hold did not suggest a class to use.
- ;
- ;mohinterpret=default
- ;
- ; Silence suppression can be enabled when sound is over a certain threshold.
- ; The value for the threshold should probably be between 500 and 2000 or so,
- ; but your mileage may vary. Use the echo test to evaluate the best setting.
- ;silencesuppression = yes
- ;silencethreshold = 1000
- ;
- ; To set which ALSA device to use, change this parameter
- ;input_device=hw:0,0
- ;output_device=hw:0,0
- ;
- ; Default mute state (can also be toggled via CLI)
- ;mute=true
- ;
- ; If enabled, no audio capture device will be opened. This is useful on
- ; systems where there will be no return audio path, such as overhead pagers.
- ;noaudiocapture=true
- ;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
- ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
- ; ALSA channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The ALSA channel can't accept jitter,
- ; thus an enabled jitterbuffer on the receive ALSA side will always
- ; be used if the sending side can create jitter.
- ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
- ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
- ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
- ; jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set.
- ; The option represents the number of milliseconds by which the new
- ; jitter buffer will pad its size. the default is 40, so without
- ; modification, the new jitter buffer will set its size to the jitter
- ; value plus 40 milliseconds. increasing this value may help if your
- ; network normally has low jitter, but occasionally has spikes.
- ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
- ;-----------------------------------------------------------------------------------
|
