| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- ;
- ; chan_mobile.conf
- ; configuration file for chan_mobile
- ;
- [general]
- interval=30 ; Number of seconds between trying to connect to devices.
- ; The following is a list of adapters we use.
- ; id must be unique and address is the bdaddr of the adapter from hciconfig.
- ; Each adapter may only have one device (headset or phone) connected at a time.
- ; Add an [adapter] entry for each adapter you have.
- [adapter]
- id=blue
- address=00:09:DD:60:01:A3
- ;forcemaster=yes ; attempt to force adapter into master mode. default is no.
- ;alignmentdetection=yes ; enable this if you sometimes get 'white noise' on asterisk side of the call
- ; its a bug in the bluetooth adapter firmware, enabling this will compensate for it.
- ; default is no.
- [adapter]
- id=dlink
- address=00:80:C8:35:52:78
- ; The following is a list of the devices we deal with.
- ; Every device listed below will be available for calls in and out of Asterisk.
- ; Each device needs an adapter=xxxx entry which determines which bluetooth adapter is used.
- ; Use the CLI command 'mobile search' to discover devices.
- ; Use the CLI command 'mobile show devices' to see device status.
- ;
- ; To place a call out through a mobile phone use Dial(Mobile/[device]/NNN.....) or Dial(Mobile/gn/NNN......) in your dialplan.
- ; To call a headset use Dial(Mobile/[device]).
- [LGTU550]
- address=00:E0:91:7F:46:44 ; the address of the phone
- port=4 ; the rfcomm port number (from mobile search)
- context=incoming-mobile ; dialplan context for incoming calls
- adapter=dlink ; adapter to use
- group=1 ; this phone is in channel group 1
- ;sms=no ; support SMS, defaults to yes
- ;nocallsetup=yes ; set this only if your phone reports that it supports call progress notification, but does not do it. Motorola L6 for example.
- [blackberry]
- address=00:60:57:32:7E:B2
- port=2
- context=incoming-mobile
- adapter=dlink
- group=1
- ;blackberry=yes ; set this if you are using a blackberry device
- [6310i]
- address=00:60:57:32:7E:B1
- port=13
- context=incoming-mobile
- adapter=dlink
- group=1 ; this phone is in channel group 1 also.
- [headset]
- address=00:0B:9E:11:AE:C6
- port=1
- type=headset ; This is a headset, not a Phone !
- adapter=blue
- [headset1]
- address=00:0B:9E:11:74:A5
- port=1
- type=headset
- adapter=dlink
|
